2004 Australian Capital Territory general election


Elections to the Australian Capital Territory Legislative Assembly were held on Saturday, 16 October 2004. The incumbent Labor Party, led by Jon Stanhope, was challenged by the Liberal Party, led by Brendan Smyth. Candidates were elected to fill three multi-member electorates using a single transferable vote method, known as the Hare-Clark system. The result was a clear majority of nine seats in the 17-member unicameral Assembly for Labor. It marked the first and so far only time in the history of ACT self-government that one party was able to win a majority in its own right. Stanhope was elected Chief Minister at the first sitting of the sixth Assembly on 4 November 2004. The election was conducted by the ACT Electoral Commission and was the second time in Australia's history that an electronic voting and counting system was used for some, but not all, polling places, expanding on the initial trial of the system at the 2001 ACT election.

Key dates

The incumbent centre-left Labor Party, led by Chief Minister Jon Stanhope, attempted to win re-election for a second term after coming to power in 2001. Labor was challenged by the opposition centre-right Liberal Party, led by Brendan Smyth, who assumed the Liberal leadership in November 2002. A third party, the ACT Greens, held one seat in the Assembly through retiring member, Kerrie Tucker.
The election saw all 17 members of the Assembly face re-election, with members being elected by the Hare-Clark system of proportional representation. The Assembly is divided into three electorates: five-member Brindabella and Ginninderra and seven-member Molonglo. Election dates are set in statute to occur once every four years; the government has no ability to set the election date.
Following the 2001 election outcome, Labor held eight seats; the opposition Liberal Party held seven seats; with the Greens holding a further one seat; and the Democrats also holding one seat. In September 2002, Helen Cross resigned from the Liberal Party, and remained in the Assembly, sitting as an independent. Gary Humphries, the former Liberal leader, resigned from the Assembly on 25 November 2002 to fill a casual vacancy in the Australian Senate following the resignation of Margaret Reid. Humphries was replaced in the Assembly by Jacqui Burke who was sworn in on 18 February 2003.

Candidates

Sitting members at the time of the election are in bold. Tickets that elected at least one MLA are highlighted in the relevant colour. Successful candidates are indicated by an asterisk.

Retiring Members

Labor

Five seats were up for election. The Labor Party was defending three seats. The Liberal Party was defending two seats.

Ginninderra">Ginninderra electorate">Ginninderra

Five seats were up for election. The Labor Party was defending two seats. The Liberal Party was defending two seats. The Australian Democrats were defending one seat.

Molonglo">Molonglo electorate">Molonglo

Seven seats were up for election. The Labor Party was defending three seats. The Liberal Party had won three seats in 2001 but after Helen Cross's departure from the party in 2002 was defending two seats. The Greens were defending one seat. Helen Cross was also defending her seat with an independent list.

Results

On election night 16 October 2004, four hours after the close of polling, with 78 per cent of the vote counted, Liberal leader, Brendan Smyth, conceded defeat to Labor. Smyth conceded that the incumbent Labor Government had been returned for a second term and appeared set to win the Territory's first ever majority mandate. Labor had obtained 47 per cent of the vote across the ACT, with the Liberals at 34.8 per cent and the Greens at 9.2 per cent. Swings were recorded towards Labor, Liberal and the ACT Greens. Support for the Democrats collapsed and they lost their one and only seat. Counting continued up until 27 October 2004, when all preferences were distributed, resulting in Labor winning nine seats, the Liberals winning seven seats, while the Greens won one seat. The ACT Electoral Commission determined and announced the election's final results on 29 October 2004. The result marked the first time in the history of ACT self-government that one party was able to win a majority in its own right.
In Brindabella, Labor retained its three seats and the Liberals retained its two seats. Government minister John Hargreaves and backbencher Karin MacDonald were re-elected; with Mick Gentleman replacing the retired former Government minister Bill Wood. For the Liberal Party, leader Brendan Smyth and shadow minister Steve Pratt were both re-elected.
Labor gained a seat in Ginninderra, where Democrats sitting member Roslyn Dundas unsuccessfully sought re-election. The Liberals retained their two seats. Chief Minister Jon Stanhope and Labor Speaker Wayne Berry were both re-elected, with Mary Porter winning the additional seat for Labor. Both Bill Stefaniak and Vicki Dunne retained their seats for the Liberal Party.
In seven-member Molonglo, there was no change to representation from the 2001 ACT election with both Labor and the Liberals retaining three seats, and the Greens retaining one seat. Labor Deputy Chief Minister Ted Quinlan, and ministers Katy Gallagher and Simon Corbell all won re-election. The Liberal benches saw the re-election of one member, Jacqui Burke and two new members, Zed Seselja and Richard Mulcahy; following the retirement of long-serving member and former Speaker, Greg Cornwell. Helen Cross, elected as a Liberal member at the 2001 ACT election, resigned from the Liberal Party in September 2002 to become an independent. Cross failed to get re-elected at the 2004 ACT election. The Greens sitting member, Kerrie Tucker, resigned from the Assembly less than one month before the election. The Greens endorsed Deb Foskey, who was elected as the sole Green in the Assembly.

Electronic voting and counting system

Overview

The ACT's electronic voting system was first used at the 2001 election and was again used at the 2004 election. The system used standard personal computers as voting terminals, with voters using a barcode to authenticate their votes. Voting terminals were linked to a server in each polling location using a secure local area network. No votes were taken or transmitted over a public network like the Internet. The electronic voting system was used in the pre-poll voting centres, which were open for three weeks before polling day, and which opened on election day as ordinary polling places. In polling places that did not have electronic voting, voters used traditional paper ballots. In electronic polling places, voters were given a choice of voting electronically or on paper.
Electronic counting, which combines the counting of electronic votes and paper ballots, was first used in the ACT at the 2001 election and was again used in the 2004 election. In 2001 and 2004, preferences shown on paper ballots were data-entered by two independent operators, electronically checked for errors, and manually corrected if required. This data was then combined with the results of the electronic voting, and the computer program distributed preferences under the ACT's Hare-Clark electoral system. The software for the electronic voting and counting system was built using Linux open source software, which was chosen specifically for the electoral system to ensure that election software is open and transparent and could be made available to scrutineers, candidates and other participants in the electoral process.

2004 statistics

In 2004, a total of 28,169 electronic votes were recorded at four pre-poll voting centres and at eight polling places on polling day. This number of electronic votes represented a 70 per cent increase on the 16,559 electronic votes cast at the 2001 election. The proportion of electronic votes in relation to all votes counted increased from 8.3 per cent in 2001 to 13.4 per cent in 2004. At each electronic polling place the number of voting machines was increased from ten in 2001 to at least fifteen in 2004 to ensure that those that wished to use computers to vote could do so with minimal queues. The ACT Electoral Commission claims that interim results for 20,722 votes using the electronic voting system were available through the Commission's website by ten minutes after the close of polls on polling night. Later in the night, a further 7,447 electronic votes cast were made available. Before 10:00pm, interim preference results from all formal electronic votes cast were available, representing 13.6 per cent of all formal votes. Based on these, and other results, the Commission claims that commentators were able to accurately predict the election outcome. Of the seventeen candidates indicated as elected on election night using the 27,849 formal electronic votes, sixteen were ultimately elected. Only one candidate indicated as elected on election night was not ultimately successful – Labor candidate Andrew Barr was the last candidate indicated as elected in Molonglo on election night. After the full distribution of all preferences, the last position in Molonglo was taken by Liberal candidate Zed Seselja.