AMC Rebel


The AMC Rebel is a midsized car produced by American Motors Corporation from 1967 to 1970. It replaced the Rambler Classic. The Rebel was replaced by the similar AMC Matador for the 1971 model year. The Rebel was positioned as the high-volume seller in the independent automaker's line of models.
The Rebel was available in several specialty models that included limited numbers of station wagons with special-themed trim and luxury equipment that were offered only in certain geographical areas. A high-performance, low-priced muscle car version was produced in 1970, the Machine, that is most recognized in its flamboyant white, red, and blue trim.
The Rebel is the shorter-wheelbase, intermediate-sized version of the longer-wheelbase, full-sized Ambassador line.
The Rebel was built at AMC's West Assembly Line in Kenosha, Wisconsin, and in Brampton, Ontario, Canada.
The Rebel was also assembled from Complete Knock-down kits under license in Europe, in Mexico, in Costa Rica by Purdy Motor; and from Semi Knock- down kits in Australia, and in New Zealand Despite the Rambler name being discontinued on the Rebel in the North American market after the 1967 model year, Rebels continued to be sold in international markets under the "Rambler" brand name.

Background

The "Rebel" name was introduced by AMC in 1957 as a special model with a big V8 engine: the Rambler Rebel, the first factory-produced lightweight muscle car, and the first hint that muscle cars would be part of the company's future.
The Rebel name reappeared in 1966 on the top-of-the-line version of the Rambler Classic two-door hardtop. It featured bucket seats, special trim, and a revised roofline. For 1967, AMC's entire intermediate line took the Rebel name.
Based on the Ambassador platform, the new Rebel models were designed under the leadership of Roy Abernethy, but the automaker changed management in January 1967 with new chairman and CEO Roy D. Chapin, Jr. trying hard to change AMC's frumpy image. The redesigned intermediate line began to be promoted with a focus on performance and print advertising as one of the "now" cars, as well as having numerous factory and dealer installed high-output options.
During its production from 1967 to 1970, the Rebel was available as a six-passenger, four-door sedan, two-door hardtop, and four-door station wagon with an optional third-row seat for two more passengers. In addition, a two-door sedan with a thin B-pillar and flip out rear side windows was available in 1967 only, and a convertible was offered in 1967 and 1968.
The six-cylinder engines that were introduced by AMC in 1964 were continued. However, the 1967 Rebel models introduced the first of a family of all-new V8s that replaced AMC's long-lived "Gen-1" designs in the mid-sized automobile market segment. These included the and engines that debuted in the 1966 Rambler American. With a four-barrel carburetor and dual exhaust, the 343 V8 produced at 4800 rpm and of torque at 3000 rpm. The new Rebels also eliminated the torque tube design used in the Rambler Classic in favor of an open drive shaft with a four-link, trailing-arm rear live axle rear suspension system to provide a more comfortable coil spring ride. The independent front suspension continued to use AMC's unequal-length control arms and high-mount coil springs.

1967

The 1967 Rambler Rebel by American Motors was completely new design from its predecessor, the Rambler Classic. Now a larger car riding on a two-inch longer wheelbase, the width was also increased by nearly 4 in to enlarge interior passenger space and cargo capacity. The Rebel had as much interior space as full-sized cars from Ford and GM. The new body design was in sharp contrast to its predecessor's "straight-edge" design. The Rebel featured a smooth, rounded appearance with sweeping rooflines, a "Coke-bottle" body with a shorter rear deck, and greater glass area for increased visibility. However, the design "themes" such the "hop-up" fenders became so pervasive across the industry that the all-new 1967 Rebel was criticized because "viewed from any angle, anyone other than an out-and-out car buff would have trouble distinguishing the Rebel from its GM, Ford, and Chrysler Corp. competition." American Motors was staying abreast of the fashion and the Rebel was the first "family car with style that rivaled function."
A new safety-oriented instrument panel featured a steering column designed to collapse under impact, and the gauges and controls were grouped in a hooded binnacle front of the driver with the dashboard pushed forward and away from the passengers.
The Rebel models were similar to the senior Ambassador in that they shared the same basic unit body aft of the cowl. However, the Rebel's front end had an entirely new concept with a "venturi" grille motif in die cast metal, while its rear end featured a simple design with inward-curved taillights. Rebels came in the base 550 and deluxe 770 models, with a high-line SST available only as a two-door hardtop.
The base 550 two-door sedan featured the identical "semifastback" roofline as the more expensive pillar-less hardtops, but had slim B-pillars that gave them a more "sporty" coupe appearance. The convertible featured a new "split stack" folding mechanism design that allowed a full-width backseat with room for three passengers. The four-door sedans continued a traditional notchback form, albeit smoothed from the previously sharp angled roofline. The Cross Country station wagons featured a standard roof rack, all-vinyl upholstery, and a drop-down tailgate for carrying long loads. A third, rear-facing seat was optional with a side-hinged tailgate for easier access. The Rebel 770 wagon was available after midyear production with 3M's DI-NOC simulated wood-grain body side panels trimmed in a slim, stainless steel frame.
Starting with the 1967 models, American Motors offered the industry's most comprehensive warranty up to that time: two-years or on the entire automobile, and five-years or on the engine and power train. American Motors continued its industry exclusive ceramic-coated exhaust system as standard.
To further emphasize the durability and prove the reliability of the new Rebels, an absolute record of 30 hours flat was set in the long-distance Baja run down Mexico's Baja California Peninsula in 1967. A hole in the transmission pan slowed them down, but the endurance racers were able to get the car to a town to get a new one.
Offering traditional Rambler economy with six-cylinder engines and overdrive transmissions, the Rebel could also be turned "into a decent budget-priced muscle car" with the, the largest available engine from AMC in 1967. A road test by Car Life magazine of a Rebel SST hardtop equipped with the 343 V8 and automatic transmission turned in a 0-60 mph time of nine seconds, and reached a top speed of. A road test by Popular Science found similar performance times and noted that their Rebel SST was the quietest-riding of the tested cars, but with the drawback of wind noise. The magazine also praised Rebel's reclining backrests for both front seats that reduce fatigue on long trips while a co-driver can stretch out and relax, as well as AMC's self-tightening seat belts that aid in buckling and in comfort. A survey conducted by Popular Mechanics after owners had driven their cars concluded: "in all, the report indicates that most Rebel owners are delighted with their purchases." Journalist and automobile critic, Tom McCahill, summarized his Mechanix Illustrated road test, "there isn't a better intermediate size car sold in the United States than the 1967 Rebel".

1968

The 1968 model year Rebels were introduced on 26 September 1967, and were no longer a Rambler in name. The mid-sized models were now named the AMC Rebel, but little was changed except for the safety features and the mid-model year availability of the AMX V8 that was introduced for the new two-seat AMX model. For ten years AMC "strictly observed the auto industry's anti-racing resolution" but following the management change in 1967, the AMC Rebel began to be campaigned on the dragstrips. The top-of-the-line model SST came standard with the "Typhoon" V8 while all the other models were available with the I6 engine.
The 1968 models were treated to a modest restyle of the trim, grille, and taillamps. New mandates by the Federal Motor Vehicle Safety Standards for all 1968 model passenger cars were incorporated. Safety equipment including separate shoulder harness for the front seat belts, two rear lap belts, lighted side markers, padded seat backs, non-glare finish, safety design handles and armrests, energy absorbing steering column and optional headrests. American Motors did not wait for the requirements to cars delivered to dealers after 31 December 1967, but incorporated the safety features starting with the early 1968 model year cars produced in late 1967. Other requirements caused increases to the price of all cars manufactured after 1 January 1968, including exhaust control systems to help reduce unburned hydrocarbon and carbon monoxide emissions.
A new AMC safety and styling feature was also introduced on the 1968 Rebels; the flush-mounted paddle-style door handles. These replaced the former push-button design and become an enduring AMC signature on its passenger cars through 1988 and the Jeep Wrangler until 2006.
Also new for 1968 was the Rebel 550 Convertible, the last AMC convertible, which replaced the American. The 550 was the base level convertible as the top trim version moved from 770 to the SST model joining the two-door hardtop. The two SST body styles featured more trim and features that included individually adjustable and reclining front seats, as well as simulated air-intakes ahead of the rear wheels. The interiors of AMC's Rebel made extensive use of a new olefin fiber carpeting.
American Motors changed its advertising agency to Wells, Rich, and Greene, which was headed by Mary Wells Lawrence. The automaker wanted to attract the highly individualistic, "non-average buyer". The new agency established innovative campaigns and promotions for AMC that emphasized value for the money in direct comparisons to the competition showing "elegantly coifed beauties swooping from swank settings into modest AMC Rebels just as contentedly as if the cars were Continentals. Meanwhile, an off-camera voice proclaims: 'Either we're charging too little for our cars or everyone else is charging too much.'" The advertising was highly controversial because it violated the accepted rule of not attacking the competition. This marketing was successful in bringing AMC back to the firm's economy and practical-car roots in customers' minds, which resulted in higher sales.

1969

The 1969 model year saw elimination of the 550 and 770 models, as well as the convertible body style. The four-door sedan, station wagon, and two-door hardtop were now available in base and SST trim. The automaker was moving the Rebel line to a more "family-oriented" direction and only the two-door SST model received new simulated "louver" trim ahead of the rear wheel openings.
Exterior changes included a new grille, wrap-around taillights, decklid, as well as trim and ornamentation. The front and rear track was increased from to, but all other dimensions remained the same.
The interior received a new deeply hooded instrument panel with clustered instruments and controls in front of the driver. A comparison of all domestic station wagons by Popular Mechanics noted that the intermediate-size models will not carry by plywood panels flat on the load floor because of width between the wheel well trim, but described the "cargo space in the Rebel wagons is impressive" featuring of space.
American Motors produced an innovative advertising campaign for the 1969 AMC Rebel that became one of the best TV commercials in one of 15 categories as selected by a team of experts. Known as a builder of "Aunt Martha fuddy-duddy-type cars, but in the late 1960s, at the peak of America's love affair with the auto, AMC wanted to be jazzy." It had previously taken a "totally rational approach" – such as describing the benefits of factory rust-proofing and long warranty coverage. The goal of the new advertising was to highlight AMC's differences and "make an impact" with the car line. Considered as "one of the funniest TV commercials of all time – not just for cars" is the 1969 AMC Rebel that is torture-tested by student drivers.

1970

In 1970, the sedan and coupe received a restyled rear-end, along with a new C-pillar shape and rear quarters, as well as a more massive rear end and bumper. The hardtop was changed to a more sloping roofline with upswept reverse-angle quarter windows, giving them "a somewhat huskier look for 1970". The taillights were integrated into a new loop rear bumper with Rebel spelled out between them. The four-door sedans also had an altered roofline with a slimmer C-pillar and larger, squared-off rear door windows. Similarly as on the coupe, the belt line kicked up beneath the trailing edge of the rear door windows, and then tapered back to the same rear fascia as on the hardtop. The Rebel sedans and hardtop models two inches longer than previously. The Rebel station wagons saw no change to their rooflines, doors, and rear fascias.
The grille was again revised with a horizontal spit in the middle and the name, Rebel, was spelled out on the left lip of the hood. The exterior trim, colors, and model identification locations were also modified for 1970. Rebels were available in base or SST trim. The effect of the changes was summarized by the Auto Editor of Popular Mechanics, "the Rebel has a 'no nonsense' air about it I find appealing.
Safety changes included "clam shell" bucket seats with high backed integrated head restraints. The side structure of the 4-door sedans and 2-door hardtops was made stronger. While the competition from the domestic "Big Three" automakers were increasing in size, the Rebel was smaller and lighter, with a six-cylinder manual 2-door hardtop weighing in at and a V8 automatic station wagon at
A major change was to the available AMC V8 engine. The standard V8 was replaced for 1970 by a new while the was also supplanted by a. The 360 V8 was available with a 2-barrel carburetor producing or in a 4-barrel version producing. The "AMX" engine now produced and was optional on SST models, while a special high-performance at 5,100 rpm and maximum torque of at 3,600 rpm version was standard on The Machine, with a single 4-barrel Motorcraft carburetor. This was the most powerful engine AMC would ever offer in a regular production vehicle. The center console mounted floor-shift automatic transmission cars received a new "pistol-handle" shaped grip design.
A Popular Science road test comparing six-cylinder intermediate-sized 4-door sedans reported that the Rebel 770 was the quietest, offered the most interior space and trunk room, "yet burns less gas than the others." A Popular Mechanics nationwide survey based on 316,000 of owner-driven miles found that style, handling, and comfort abound, but so do minor rattles. The V8 engine was selected by almost 87% of owners for its combination of performance and durability. The AMC Rebels also excelled "in freedom from mechanical troubles and workmanship complaints" with the magazine noting that owners took "delivery of perfectly-put-together cars – quite a remarkable feat."
The 1970 restyle lasted only one year before a further restyle and renaming the models as the AMC Matador. The four-door and wagon platform would remain unchanged until the retirement of the Matador line after the 1978 model year.

Regional models

Station wagons

All regular Rebel station wagons were called Cross Country by AMC. During the 1967 model year, AMC issued a series of specialty Rebel station wagons with luxury equipment. Designed to spur interest in all of AMC's products and to generate increased sales for the company, the special wagons were limited for sale to geographical areas. According to automotive historian James C. Mays, the regional wagon marketing program was a success and it contributed to increasing confidence among the public in the "feisty" automaker.
Standard equipment on all regional wagons included V8 engine, automatic transmission, power steering, power drum brakes, as well as special duty springs and shock absorbers. Each featured a distinctive interior and exterior trim:
Each version included the color-coordinated upholstery and door panels, individually adjustable reclining seats, sports steering wheel, as well as the of carpeted cargo room, a locking hidden compartment, and a roof rack. Special regional nameplates were on the rear fender in addition to the unique medallions on the C-pillar.

Raider

In 1969, a Rebel Raider two-door hardtop was sold only in New York and New Jersey. The marketing of these cars was timed to coincide with the New York City Auto Show. Three hundred Raiders were built and many were part of a "driveaway" by area dealers on the eve of the Auto Show. All Raiders came with a V8 engine with automatic transmission, as well as "blow-your mind colors to choose from: electric green, tangerine, and blue-you’ve never seen". This was a test market of the "Big Bad" colors by AMC through a regional dealer-lead promotional campaign. The bright hues were later introduced at mid-year on the Javelin and AMX models. Other standard features on the Raider included black upholstery and carpeting, black front grille, black vinyl roof, a sports-type steering wheel, AM radio, power steering, and power brakes. The total price of the special Raider models was advertised at US$2,699.

Rebel funny cars

Under the leadership of Roy Abernethy, AMC observed both the letter and spirit of the resolution prohibiting automakers from sponsorship in automobile racing. It was instituted by the Automobile Manufacturers Association in 1957. As Rambler's sales reached third place in the domestic marketplace, AMC continued to advertise the only race the company was interested in was the human race. However, with AMC's precarious financial condition in 1966 following the race to match its "Big Three" domestic competitors under Roy Abernethy, the new management reversed AMC's anti-racing strategy and decided to enter motorsports as a method to gain exposure, publicity, and a performance image.
American Motors' Performance Activities Director Carl Chakmakjian was charged to get AMC automobiles in racing, which would help to attract a younger customer base. In a "quest for quarter-mile glory", AMC reached a $1 million agreement in 1967 with Grant Industries in Los Angeles, California, to build the Grant Rambler Rebel, a "Funny Car" racer to compete in the National Hot Rod Association X/S and Super Experimental Stock classes.
When asked why the company decided to work with AMC, Grant's President, Grant McCoon responded, "Rambler is a good automobile, and it's time somebody proved what it can do". The relationship provided both companies with national exposure and publicity. The car had an altered wheelbase RCS tube chassis with a AMC V8 engine that was bored and stroked to tuned by Amos Satterlee. With its GMC 6–71 blower and Enderle fuel injection, the motor produced winding up to 9000 rpm on a mixture of alcohol and nitromethane. Starting in June 1967, the car was driven by "Banzai" Bill Hayes and painted red featuring a blue racing stripe with white stars. Soon, Hayden Proffitt took over the Grant funny car program and ran the Rebel on the quarter-mile from a standing start in 8.11 seconds at.
For the 1968 season, a new car was built and renamed the Grant Rebel SST and painted in the new hash red, white, and blue AMC corporate racing colors. With Hayden piloting, the car consistently ran the dragstrip in the mid-eight second range at speeds around. By the end of 1968, AMC dropped out of funny car racing to concentrate on its new Javelin pony car in SCCA Trans Am road racing, while Proffitt retired from racing for a few years.
In 1968, Ron Rosenberry drove the King Rebel of Ted McOsker using a blown fuel Chrysler Hemi engine and had a known best of 9.58 seconds at in the quarter-mile dragstrip.

The Machine

The most recognizable muscle car version of the AMC Rebel was named The Machine and available for the 1970 model year, following the success of the 1969 SC/Rambler. In its most patriotic or flamboyant factory trim The Machine was painted white featured bold red, white, and blue reflective stripes on the bodysides that wrapped over the trunk lid.

Concept muscle models

First proposed in June 1968, the car was to have been a 1969 Rebel coupe finished in black with authoritative black wheels and fat tires, without any stripes, scoops, or spoilers, but with an aggressive, street-fighting stance. The proposed model included "The Machine" decal on the rear, as well as a "fab gear" logo on the front fender.
However, an even earlier attempt at a Rebel-based muscle car was produced by the AMC's engineering team: a 1967 two-door built as a development "project" car for carburetion-testing purposes, as well as with "Group 19" high-performance options and the car was re-equipped with a modified engine with an estimated "capable of running in the 11-second bracket." The car was considered a legal drag racing car, according to National Hot Rod Association and American Hot Rod Association rules and regulations in effect during those years. The Machine was finished in AMC's trademark red, white and blue color scheme, although the color breaks were not the same as on other AMC-backed or developed race cars.

Performance features

American Motors' high performance "halo" vehicle made its official debut 25 October 1969, in Dallas, Texas; the site of the National Hot Rod Association's World Championship Drag Race Finals. The Rebel Machine was factory rated at 10.7 pounds per horsepower, positioning the car for the NHRA F-stock class. The introductory marketing campaign consisted of ten vehicles that were driven from the factory in Kenosha, Wisconsin to Dallas, Texas and raced in the condition they arrived in. There were four cars on the track "in bone-stock trim" that ran solid mid-14s during the press day at the now-defunct Dallas International Motor Speedway. All these cars were subsequently campaigned at numerous other drag strips, and subsequently sold as used vehicles according to AMC corporate policy. The automaker's marketing objective was for each AMC dealer to have one colorful Rebel Machine on display in their showrooms to lure non-AMC potential customers so they could be introduced to the other models. The most successful dealers actually raced the cars at local drag strips.
The Machine was developed from a collaboration between Hurst Performance and AMC, but unlike the compact SC/Rambler, there was no official connection between the two parties once production commenced. The standard engine in The Machine was AMC's V8 engine rated at at 5100 and of torque at 3600 rpm. It came with special heads, valve train, cam, as well as a redesigned intake and exhaust. This was the most powerful in any AMC vehicle while retaining features required for normal street operations, as well as components to assure outstanding performance characteristics without incurring high-unit cost penalties. The engine is fed by a 690-cfm Motorcraft 4-barrel carburetor, and pumped up a 10.0:1 compression requiring high-octane gasoline.
The Machine features a large ram-air intake hood scoop that was painted Electric Blue with a large tachometer visible to the driver integrated into a raised fairing at the rear of the scoop. This hood-mounted tach came from the same vendor as used on competing makes with only different dial faces. Early production hood scoops were fiberglass layups, while those installed on Machines after 1 January 1970 were injection molded and of higher quality. The heavy-duty suspension was augmented by station wagon springs in the rear giving the car a raked look. Standard were a Borg-Warner T-10 four-speed manual transmission with a Hurst floor shifter backed by either 3.54:1 or 3.91:1 rear axle gear ratios in the "Twin-Grip" differential, as well as power disc brakes, wide E60x15 Goodyear Polyglas white letter tires mounted on "Machine" mag-styled steel x wheels, and a black interior with bucket seats and a center armrest upholstered in red, white, and blue vinyl.

Machine wheels

Among its standard performance features, all The Machine models included a special set of wheels with the appearance of a cast alloy wheel. Painted silver metal-flake with a rough texture, they have a mag-style appearance. AMC described them as "15-inch styled road wheels" in brochures and catalogs. Enthusiasts call them "Machine wheels" and the wheel's came with a chrome center cap adorned with a blue trim disc featuring a gear icon in the center and the words American Motors around it. The x wheels made by Kelsey-Hayes. They have five narrow cooling slots positioned atop risers stamped around the center of the wheel. The trim ring is unusual because it does not overlap the rim and it is permanently press-fit.
The "Machine" wheels were also optional on the 1970 AMX and Javelin models through the 1972 model year, as well as part of the "Go-Package" on 1971 and 1972 Javelin AMXs, after which a more conventional 15x7-inch slotted steel rally wheel replaced it.

Marketing

Advertisements in magazines such as Hot Rod teased that The Machine is not as fast as a Chevrolet Corvette or a Chrysler Hemi engine, but it will beat a "Volkswagen, a slow freight train, or your old man's Cadillac. Numerous upgrades were standard to make each Machine a potent turnkey drag racer. In contrast to the lack of options on the SC/Rambler, Machine buyers could order numerous extras from the factory. These included substituting the manual for a center console mounted "pistol grip" automatic transmission for $188, adding cruise control cost $60, an adjustable tilting steering wheel cost $45, and even air conditioning was available for an additional $380. Furthermore, American Motors dealers sold numerous performance parts over the counter, such as an incredibly steep 5.00:1 gearing "for hardcore drag-racer types." An optional "service kit" for $500.00 increased horsepower to well over and lowered its quarter-mile drag strip times from 14.4 with the factory Autolite carburetor to 12.72 seconds.
American Motors Vice-President for Sales, Bill Pickett described that the Rebel Machine was "another youth-oriented car." The company described, "the supercar buyer is usually young, relatively affluent and has a "critical awareness" of exterior styling. At the same time he wants to be treated as an individual and stand out from the crowd. The Rebel Machine's distinctive paint job, rakish nose-down attitude and obvious performance characteristics lets the supercar buyer express his identity, or, in the words of today, 'Do your own thing'. Being different from the crowd today does not necessarily mean being against something, but rather in reinforcing certain specific ideas. We anticipate that the Machine will identify with this new brand of rebel, who demonstrates for something." The automaker claimed in its marketing promotion that "The Machine is not that fast," but that the car was capable to "give many muscle cars from the big three a run for their money". According to a retrospective Motor Trend article, The Machine is the most strip-ready car of the group they tested. The Machine could spring from zero to 60 miles per hour in just 6.4 seconds, a creditable showing even today. The Machine's top speed was.
The manufacturer's suggested retail price price was $3,475. After the initial run of 1,000 units with its distinctive and easily recognizable identity, The Machine was available without the stripes in other colors with a blacked out hood. A unique paint schemes for the Machine is Frost White with a flat-black hood, with only three made. Another exclusive version came in "Big Bad Green" with at least three made and possibly only one known factory documented original car remaining. The original trim scheme became a $75 option. There were a total of 2,326 Rebel Machines built in 1970. With the Machine "AMC had acquired a reputation for the ability to create eye-catching, high performance machines at a knock-down price."
According to the former editor of Motor Trend magazine, before BMW took "The Ultimate Driving Machine" moniker for itself, American Motors dubbed its high-performance model that could hold its head high in fast company simply "The Machine" and it deserves to be considered among the Greatest Cars of All Time.
The 'Machine' option was offered again as a package for the 1971 re-styled Rebel named Matador.

Convertibles

During the 1967 model year, American Motors produced a total of 1,686 Rambler Rebel convertibles; all in the top-trim SST model. Automatic power operation of top was standard. The new convertible top design featured a "streamlined" look blending smoothly with the lower body with the top up. Its new "split stack" folding mechanism also allowed a lower stack height with the top folded down, as well as for a full-width backseat with room for three passengers.
For 1968, the Rambler name was dropped and two convertible versions were offered in the Rebel line. A total of 1,200 were produced. Since convertibles in the Rambler American and Ambassador series were dropped after 1967, the 1968 Rebels were the only open models built by AMC. This was also the last year for AMC convertibles until this body style was added to the compact Renault Alliance in 1985.

Other markets

The AMC Rebel was produced under a number of business ventures in foreign markets. In these markets, "the Rebel was still the epitome of the modern mass-produced US sedan."

Australia

4-door sedan and station wagon Rebels were assembled from Semi- Knock-Down kits by Australian Motor Industries in Port Melbourne, Victoria.
The cars had the engine, transmission, front suspension, rear axle, and doors installed in Kenosha, Wisconsin, and were built with right-hand drive Other parts were boxed and shipped inside the car for final assembly in Australia.
RHD Rebel dashes used in all export markets were a mirror of the 1967 Ambassador dash and two-dial instrument pack rather than the North American dash and rectangular speedometer. This RHD dash and cluster had originally been used by AMC for the RHD Ambassadors they assembled for the United States Postal Service during 1967. The dash and cluster were reused for all RHD-market Rebels and Matadors.
Australian models had to have aftermarket amber rear indicator lights fitted in the boot lid to 1969 and amber lenses fitted behind the clear reverse lenses on 1970 models, as flashing red indicators were barred in Australia. Also in Australia, numerous other parts and components such as brakes, seats, carpet, lights, heaters, etc. were sourced locally to gain tariff concessions. As AMI also assembled Toyota vehicles, some parts used on the AMI Rebels were sourced from Toyota.
For the 1970 model, all Rebels came with AMC's new 360 cu in V8 engine and Borg Warner 3-speed automatic transmission.
After the Rebel was discontinued by AMC after 1970 Australia continued to assemble the 1970 Rebel throughout 1971 alongside the replacement 1971 AMC Matador sedan.
2-door variants of the Rebel were not marketed in Australia.
Registrations of Australian-assembled Rebels were:
Both the Rebel and the subsequent Matador were sold in Australia under the Rambler marque, despite AMC discontinuing the use of the name on the Rebel from the 1968 model year. The Matador was sold in Australia until 1977.
From 1964 Rambler sales for New South Wales were managed by Sydney company Grenville Motors Pty Ltd, which were also the State distributor of Rover and Land Rover. A network of Sydney and country NSW dealers were controlled by Grenville which was in direct communication with AMI.

Costa Rica

Rebels were assembled in Costa Rica from Knock-down kits by Purdy Motor in San Jose. Purdy Motor had acquired the franchise rights to market American Motors vehicles in 1959 and had imported complete cars to Costa Rica, but it wasn't until 1964 that Costa Rican laws permitted local assembly of vehicles. Purdy Motor built an assembly plant in 1965 and the first locally manufactured Rambler was a 1964 Rambler Classic 660 which came off the line in late 1965. The all-new 1967 Rebel was assembled to production end, followed by its replacement, the Matador from 1971. Purdy Motor assembled AMC vehicles until 1974 when it sold its rights to another company.
As with other export markets the Rebel was marketed in Costa Rica under the Rambler marque even after the marque was retired by AMC in its home market after 1967.

Europe

Under a partnership agreement developed in 1961 with Renault, American Motors vehicles were assembled in Haren, Belgium from Complete Knock-down kits. As with the previous locally assembled Rambler Classic the new 1967 Rebel continued to be marketed as the Rambler Renault available as both sedan and hardtop models. The new for 1967 designs were sold by Renault dealers in Algeria, Austria, Belgium, France, the Netherlands, and Luxembourg.
The Rambler models served as the executive car in Renault's product line, but the entirely new design was larger car with more power than the previous Rambler Classic and no longer suitable for European automobile tax regimes or road conditions. The 1967 models were priced 20 to 25% more than the previous year's; therefore, production ended in the summer of 1967.
After Renault ceased Rebel production, business between AMC and Renault continued in Argentina via Industrias Kaiser Argentina which Renault took control of in 1967. Under its partnership arrangement with AMC, IKA had been assembling Ramblers since 1962, including the Rambler Ambassador until 1972. Renault bought out IKA in 1970 and the Santa Isabel factory of Córdoba was renamed Renault Argentina in 1975.

Mexico

American Motors had partial ownership of Vehiculos Automotores Mexicanos and the Mexican operation produced equivalent AMC Rebel models. Mexican regulations required VAM vehicles had to have at least 60% locally sourced parts. The large-sized VAM cars in only two body styles, a two-door hardtop called the Rambler Classic SST, and a four-door sedan called the Rambler Classic 770 under license from 1967 through 1970, no other trim levels or designations were available. The car was VAM's entry in the luxury segment of the Mexican auto market in contrast with its other lines that focused on economy. The VAM Classic represented the company's flagship model, a treatment that in the United States was given to the AMC Ambassador models.
In addition to different model names and marketing concept, the Mexican versions also adapted AMC I6 engines to local conditions. They also came with more upscale interiors compared their counterpart models sold in the United States and Canada. The standard engine was the I6 with two-barrel carburetor from 1967 through 1969, even though the Rambler Classic SST had the option of VAM's own I6 early in 1969, which became standard equipment several months late in the year. Since 1970, both versions were equipped with VAM's I6 with two-barrel Carter carburetor, 9.5:1 compression ratio and 266 camshaft from the factory. The cars were restricted to a three-speed manual transmission in 1967 and 1968, but were available with an optional column mounted three-speed automatic starting in 1969, making the Rambler Classic the second regular production VAM to offer an automatic transmission after the Javelin the year before. Rear gear ratios included a 3.73:1 for 1967 and a 3.54:1 for the remainder of the run. External cosmetic changes over the years in VAM Rambler Classics were mostly the same as in the U.S. and Canadian market Rebels.
Both VAM Rebel-based Rambler Classics included almost the same equipment between the two body styles with only a few exceptions. The largest difference was in the front seats. The Classic 770 came with full-width bench seat while the Classic SST had individually adjustable units, even though some of the hardtops came with a front bench. The standard features included flow-through ventilation, front door flip-open air vents, four-wheel drum brakes, rigid four-bladed cooling fan, day-night rearview mirror, two-speed electric wipers, electric washers, luxury steering wheel, electric clock, 200 km/h speedometer, cigarette lighter, front ashtray, AM Motorola radio with antenna, locking glove box, courtesy lights, dual rear ashtrays, four side armrests, front two-point seatbelts, dual coat hooks, dual dome lights on C-pillars, single dome light on headliner, fold-down armrest integrated to the rear seat back, bright molding package, luxury wheel covers, back-up lights, turn lights, and driver's side remote mirror. Optional equipment for both models included power drum brakes, power steering, automatic transmission, remote controlled driver and passenger outside mirrors, heater with front defroster, rubber-faced bumper guards, bumper tubes, and a locking gas cap, among others. Sales of the two-door hardtop body style declined in 1970.
The Rebel-based Rambler Classic models in Mexico were never available as two-door sedans, two-door convertibles, or four-door station wagons. The Rebel Machine models were also not available under VAM, although an equivalent would come in 1972 in the form of the VAM Classic Brougham hardtop.

New Zealand

Right-hand drive four-door Rebel sedans were assembled by Campbell Motor Industries in Thames, New Zealand, from semi-knock-down kits sourced from Canada which, being a fellow Commonwealth country, allowed for tariff concessions. CMI also imported fully built factory-RHD Rebel station wagons and RHD Rebel hardtops directly from AMC.
As with Australia, the sedans were built at the AMC plant with right-hand drive controls, engine, transmission, front suspension, rear axle, and doors already installed. Other parts were boxed and shipped inside the car for final assembly in New Zealand.
While the knock-down kits were the same as those used in Australia, New Zealand models were more "American" than the Australian models, as Australian laws required more local content for tariff concessions. For example, New Zealand models came with U.S seats, door cards, headliner, and sun visors, whereas these were all locally supplied on Australian models. Australian Law prohibited the use of rear red turn-signals, whereas these were allowed in New Zealand.
As with all RHD market models, New Zealand Rebels used the RHD-conversion dash and instrument pack of the 1967 Ambassador for all model years.
New Zealand did not get the U.S 1969 model but instead CMI simply reassembled the 1968 model again for 1969, but with a custom-built walnut veneer dash and cluster surround, sourced from the United Kingdom, to differentiate them.
Although AMC's new 360 cu in V8 was introduced in 1970, including for the Australian market, all New Zealand Knock-down kits for the 1970 Rebel came with the V8 engine only.
Although the Rebel ceased production at the end of 1970 in North America, CMI continued to assemble the 1970 Rebel throughout 1971. CMI assembled a total of 590 Rebel sedans and an additional 177 wagons and hardtops were fully imported. Registrations of NZ Rebels were:
Ramblers were imported into Norway during the 1950s and 1960s by Norwegian importer Kolberg & Caspary AS located at Ås, Norway. K&C was formed in 1906 and imported automotive, industrial, and construction products. The Rambler Rebel was imported by K&C from 1967 until 1969 for a total of 147 vehicles. Previously the company imported the Rambler Classic, American, and Ambassador.

United Kingdom

American Motors also exported Rebels in factory right-hand-drive to the United Kingdom. These were marketed by Rambler Motors Ltd on Great West Road, Chiswick, West London and were available from four dealers in London, Yorks, Kent, and Worcester. The Chiswick plant had previously assembled Hudson, Essex, and Terraplane motor vehicles since 1926. The operation became a subsidiary of AMC in 1961 and changed its name to Rambler Motors Ltd in 1966.
A 1967 American Motors sales brochure for the UK advertises the 770 Sedan, 770 Hardtop, SST Convertible, and 770 Station Wagon. For 1968, Rebel station wagons, SST coupe, and SST convertibles were sold in the UK alongside the Ambassador saloon and Javelin.
As had become standard with all right-hand drive markets, U.K models were built with a right-hand version of the 1967 Rambler Ambassador dash and instrument pack for all model years. Some U.K models were additionally fitted with a locally-built plywood instrument cluster fascia with walnut veneer which included a hinged door for the cavity where otherwise the "Rambler" plate was affixed. The remaining stock woodgrain dash parts were also replaced with walnut veneer.
Externally, all U.K models corresponded to those of the U.S model years.

Name change

After evaluating the situation of social unrest within the U.S. and the model name's associated connotations of rebellion, "American Motors officials decided that it was no time to be selling a car called Rebel." The automaker's marketing department conducted consumer research and determined a name change for the 1971 model year to 'Matador

Collectibility

According to automotive historian James C. Mays, the 1967 limited edition regional Rambler Rebel station wagons became a collectible before their time.
Among the 1968 to 1970 models, the 1968 Rebel convertible should gain in importance as the last of AMC's ragtops, and although station wagons and sedans later joined the SST hardtop, only the two-door models have collector appeal. The Rebel's "clean but mundane styling" is a minus for collector appeal, but Carl Cameron, an automobile designer at Chrysler and developer of the original Dodge Charger fastback, mentioned that the best competitors during the late 1960s were the AMCs with new engines and the Rambler Rebels were "really nice, very hot cars", but the company just did not have much of a presence in the marketplace.
Today, surviving models of the Rebel Machine are bold reminders that tiny AMC once took on the big boys on the streets and strips of America – and won. According to Motor Trend magazine, "The Machine is the collectible muscle car for people who laugh at collectible muscle cars." The radical Rebel Machine with its hood scoop "larger than the corner mailbox" places it among the most controversially styled cars of that era, and the cars have a strong following today with their owners being rewarded with climbing prices.