AMX-10P


The AMX-10P is a French amphibious infantry fighting vehicle. It was developed after 1965 to replace the AMX-VCI in service with the mechanized regiments of the French Army; the first prototypes were completed in 1968. Production commenced between 1972 and 1973.
The AMX-10P is fully amphibious, being propelled through water at speeds of up to 7 km/h by twin waterjets. It is also fitted as standard with a trim vane and bilge pumps to assist with the flotation process. AMX-10Ps were popular with a number of Arab armies and have been operated by Iraq, Qatar, Saudi Arabia, and the United Arab Emirates. Special marine variants were also developed for Singapore and Indonesia, including a fire support model known as the AMX-10 PAC 90, which mated the AMX-10P chassis to the complete turret and 90 mm gun assembly of the Panhard ERC-90 Sagaie.
AMX-10Ps share a number of common transmission and chassis components with their armoured car counterpart, the AMX-10RC.

Development history

The AMX-10P was developed by the Atelier de Construction d'Issy-les-Moulineaux in response to a French army requirement for a new tracked armoured fighting vehicle to supplement or replace the ageing AMX-VCI. The first prototypes were completed around 1968 and showcased to potential domestic and international customers at Satory the following year. Production did not commence on the vehicle until the French Army placed its first order in late 1972. The first AMX-10Ps were delivered in mid to late 1973 to the 7th Mechanised Brigade stationed at Reims. French Army AMX-10Ps were fitted with a 20 mm autocannon in a Toucan II two-man turret with seating for a gunner and commander; however, a number of other one-man turrets could be fitted, as well as an observation cupola for training vehicles. Export variants of the AMX-10P also abounded, including models equipped with battlefield surveillance radars, the ATILA artillery fire control system, a bank of HOT anti-tank missiles, 60 mm or 81 mm gun-mortars, and a large 90 mm gun.
Greece was the first foreign power to purchase the AMX-10P; between 1974 and 1977 the Hellenic Army ordered over a hundred individual vehicles from France, in three separate variants. Qatar followed up with an order for thirty AMX-10Ps in 1975, while Iraq, Saudi Arabia, and Indonesia also accounted for large export orders during the early 1980s. GIAT Industries accepted a final order from Singapore for AMX-10P PAC-90s in 1994; following their delivery production lines for the AMX-10P were finally closed. At this point 1,750 AMX-10Ps had been manufactured.
Approximately 108 AMX-10Ps remaining in service with the French Army underwent extensive overhauls to improve their armour and mobility between 2006 and 2008, including new gearboxes and suspension systems. They are gradually being retired and replaced by the wheeled Véhicule Blindé de Combat d'Infanterie.

Description

AMX-10P hulls are fabricated from a welded steel or aluminum alloy and notable for their parallel incorporation of the driving and engine compartments. The driver is seated at the front of the vehicle and to the left. An AMX-10P's driving compartment is provided with a single hatch cover opening to the rear and three periscopes intended for observation purposes when the hatch is closed. Night vision equipment was not fitted as standard to the base production model; however, one of the three driving periscopes could be replaced with combined day/night intensification sights as needed. The troop compartment is at the rear of the hull and provided with two roof hatches. Passengers embark and debark from a ramp, which is accessed through two doors at the rear.
Transmission consists of a hydraulic torque converter coupled to a gearbox with one reverse and four forward driving gears. The AMX-10P utilises a torsion bar suspension, which supports five road wheels with the drive sprocket at the front and idler near the rear. These can be accessed from inside the hull through maintenance panels.
Standard AMX-10P turrets are equipped with a GIAT M693 automatic cannon firing two different types of both high explosive ammunition and armour-piercing ammunition. More than one ammunition type may be loaded at once and fired alternatively. The high explosive rounds have a muzzle velocity of 1,050 m/s, while the latest armour-piercing round has a muzzle velocity of 1,300 m/s and is capable of penetrating 20 mm of rolled homogeneous armour at an incidence of 60°. The autocannon has a cyclic rate of fire of 740 rounds per minute, with the gunner being able to switch between semiautomatic, limited burst, or fully automatic fire as necessary.

External

AMX-10Ps have a very distinctive, pointed hull and a sloping glacis plate, with the driver's position plainly visible to the left. The hull roof is horizontal as well as sloped slightly inwards, accommodating a turret ring near the centre of the chassis. Both hull sides are vertical and lack firing ports. There is a circular exhaust outlet on the right side of the hull above the second and third road wheels.

Variants

This section is about operators of the AMX-10P tracked infantry fighting vehicle and its engineering and recovery variants. For operators of the wheeled armoured car derivative, see AMX-10RC.