Airbus A310


The Airbus A310 is a wide-body airliner developed and manufactured by Airbus, then a consortium of European aerospace manufacturers.
Airbus had demand for an aircraft smaller than the A300, the first Twinjet wide-body.
On 7 July 1978, the A310 was launched with orders from Swissair and Lufthansa.
On 3 April 1982, the first prototype conducted its maiden flight and it received its type certification on 11 March 1983.
Keeping the same eight-abreast cross-section, the A310 is shorter than the initial A300 variants, and has a smaller wing, down from.
The A310 introduced a two-crew glass cockpit, later adopted for the A300-600 with a common type rating.
It was powered by the same General Electric CF6-80 or Pratt & Whitney JT9D then PW4000 turbofans.
It can seat 220 passengers in two classes, or 240 in all-economy, and can fly up to.
It has overwing exits between the two main front and rear door pairs.
In April 1983, the aircraft entered revenue service with Swissair and competed with the Boeing 767-200, introduced six months before.
Its longer range and ETOPS regulations allowed it to be operated on transatlantic flights.
Until the last delivery in June 1998, 255 aircraft were produced, as it was succeeded by the larger Airbus A330-200.
It has cargo aircraft versions, and was developed into the Airbus A310 MRTT military tanker/transport.

Development

Background

On 26 September 1967, the British, French, and West German governments signed a Memorandum of Understanding to commence the joint development of the 300-seat Airbus A300. This collaborative effort resulted in the production of the consortium's first airliner, known as the Airbus A300. The A300 was a wide-body medium-to-long range passenger liner; it holds the distinction of being the first twin-engine wide-body aircraft in the world. The design was relatively revolutionary for its time and featured a number of industry firsts, making the first use of composite materials on a commercial aircraft; during 1977, the A300 became the first ETOPS-compliant aircraft, which was made possible due to its high performance and safety standards. The A300 would be produced in a range of models and sold relatively well to airlines across the world, eventually reaching a total of 816 delivered aircraft during its production life.
During the development of the earlier A300, a range of different aircraft size and capacity were studied by the consortium; the resulting Airbus A300B proposal was one of the smaller options. When the A300B1 prototypes emerged, a number of airlines issued requests for an aircraft with greater capacity, which resulted in the initial production A300B2 version. As the A300 entered service, it became increasingly apparent that there was also a sizable market for a smaller aircraft; some operators did not have enough traffic to justify the relatively large A300, while others wanted more frequency or lower aircraft-mile costs at the expense of higher seat-mile cost. At the same time, there was great pressure for Airbus to validate itself beyond the design and manufacture of a single airliner. In response to these desires, Airbus explored the options for producing a smaller derivative of the A300B2.
In order to minimise the associated research & development costs for the tentative project, Airbus chose to examine several early design studies performed during the A300 program. The company ultimately chose to prioritise its focus on one option, which became known as the A300B10MC. As envisioned, the airliner's capacity was reduced to a maximum of 220 passengers, which was viewed at the time as being a desired capacity amongst many airlines. However, such a design would have resulted in a relatively small fuselage being mated to a comparatively large wing and oversized undercarriage; such an arrangement would have, amongst other things, made the aircraft consume an unnecessarily larger amount of fuel as it carried heavier weight than what was otherwise required.
Another problem for the program was presented in the form of inflation, the rate of which in the United Kingdom was around 35 per cent during 1979–80. This factor was responsible for significantly raising the program's development costs and, as a knock-on effect, increase the per-unit cost of the resulting airliner. During the development of the A300, British manufacturer Hawker Siddeley Aviation had been appointed as the subcontractor to perform the manufacturing of the wing of the aircraft; shortly afterwards, the British government chose to withdraw from the newly formed venture during 1969. During 1977, HSA subsequently merged with three other British aircraft companies, resulting in the formation of British Aerospace. By this point, the British government had publicly indicated its intentions to rejoin the Airbus program. During May 1976, the French government entered into a series of discussions on cooperation, during which its representatives stated that the placing of an order by British Airways was a condition for the re-admission of the United Kingdom into Airbus Industrie as a full partner.
However, both BA and Rolls-Royce had not relinquished their will to collaborate with the Americans in future aircraft endeavours and, in BA's case, procure American aircraft. During the late 1970s, BA sought to purchase two separate types of aircraft in development by American company Boeing, initially known as the 7N7 and 7X7, which would develop into the 757 and 767, the latter of which being an intended rival to the upcoming A310, as well as the existing Boeing 747. Independent of the British government, BAe commenced its own dialogue between itself and American aircraft manufacturers Boeing and McDonnell Douglas for the purpose of assessing if BAe could participate any of their future programs, although the company's chairman, Lord Beswick, publicly stated that the overall aim of the firm was to pursue collaboration in Europe. At the 1978 Farnborough Air Show, Eric Varley, the British Secretary of State for Industry, announced that BAe was to rejoin Airbus Industrie and participate as a full partner from 1 January 1979 onwards. Under the negotiated arrangement, BAe would be allocated a 20 per cent shareholding in Airbus Industrie and would perform "a full part in the development and manufacturing of the A310".

Design effort

From late 1977, prior to the Varley announcement, BAe had already commenced work on the design of the new wing at its facility in Hatfield. However, due to negotiations with Britain on its return to the Airbus consortium being protracted, alternative options were explored, including potentially manufacturing the wing elsewhere. At the same time as the British efforts, French aerospace firm Aérospatiale, German aircraft manufacturer Messerschmitt-Bölkow-Blohm and Dutch-German joint venture company VFW-Fokker were also conducting their individual studies into possible options for the wing of the prospective airliner.
At the April 1978 Hanover Air Show, Airbus exhibited a model of the proposed A310. Its wing area, at was slightly larger than that studied, at ; its passenger cabin was 12 frames shorter than the A300, accommodating typical passenger loads of 195 in two-class, or 245 in economy. However, during the next 12 months, almost every aspect was further refined. On 9 June 1978, Swissair and Lufthansa developed a joint specification for the aircraft, and within a month, announced that they would place the launch orders. On 15 March, Swissair became the first airline to place a firm order for the type, announcing that it would acquire 10 with a further 10 under option to replace its McDonnell Douglas DC-9s on its major intra-European routes. Lufthansa was quick to place a $240 million 10-aircraft order; additional orders from French operator Air France and Spanish airline Iberia shortly followed.
As a consequence of increasingly strong interest in the tentative airliner, coupled with the recovery of the industry during the late 1970s, contributed to Airbus deciding to launch the A300B10, which was now known as the A310, into production on 7 July 1978. During the latter half of 1978, an order for 10 A300s was placed by independent British airline Laker Airways, satisfying Airbus's demand for the placing of a British order for their aircraft. On 1 April 1979, Lufthansa decided to raise its commitment for the type to 25 orders, along with 25 options. Two days later, Dutch operator KLM signed its order for 10 orders and 10 options at £238 million. On 6 July 1979, Air France announced that it had raised its order from 4 to 35 airliners. Other airlines announcing orders for the A310 during 1979 included Martinair, Sabena and Air Afrique.
Initially, a pair of distinct versions of the A310 had been planned by Airbus; the regional A310-100 and the transcontinental A310-200. The A310-100 featured a range of with 200 passengers, whilst the A310-200 possessed a higher MTOW and centre section fuel, being able to carry the same load a further. Basic engines offered for the type included the General Electric CF6-45B2 and Pratt & Whitney JT9D-7R4. At one point, British engine manufacturer Rolls-Royce was openly considering offering an engine for the A310, the Rolls-Royce RB.207, however, it ultimately chose to discard such efforts in favour of a smaller three-spool design, the RB.211.

Production

The range of the A310 exceeds that of the A300 series with the exception of the A300-600R, which in turn surpasses that of the A310-200. The greater range of the A310 contributed to the airliner being used extensively by operators on transatlantic routes. The A300 and A310 introduced the concept of commonality: A300-600 and A310 pilots can cross-qualify for the other aircraft with one day of training.
Sales of the A310 continued through the early 1980s. On 3 April 1982, the prototype A310-200 airliner conducted its maiden flight; by this point, the type had accumulated a combined orders and options for 181 aircraft, which had been placed by 15 airlines worldwide, which had been a relatively superior start than that of the original A300. Over time, it had become clear that the longer-range series −200 aircraft was the more popular of the two models on offer. During 1979, in response to the lack of demand for the A310-100, Airbus decided stop offering the lower gross weight model which had been originally proposed for Lufthansa; as a consequence, none of this variant were ultimately manufactured.
During the early 1990s, demand for the aircraft began to slacken; there were no new A310 passenger orders placed during the late 1990s, in part due to the introduction of the newer and more advanced Airbus A330 during this time. As a result, during June 1998, the last delivery of the A310 was completed. The A310, along with its A300 stablemate, officially ceased production during July 2007, though an order from Iraqi Airways for five A310s had remained on the books until July 2008. The remaining freighter sales were to be instead fulfilled by the new A330-200F derivative.
The A310 has been commonly marketed as an introduction to wide-body operations for airlines based in developing countries. The airliner was replaced in Airbus' lineup by the highly successful A330-200, which shares its fuselage cross-section. Between 1983 and the last aircraft produced in 1998, 255 A310s were delivered. The A300 and A310 established Airbus as a competitor to Boeing and allowed it to go ahead with the more ambitious A320 and A330/A340 families.
As of July 2017, 37 A310s remain in commercial service; major operators are Air Transat and Mahan Air with 9 aircraft each; Fedex Express, and 7 airlines operating 13 aircraft between them.
The Royal Canadian Air Force currently operates a fleet of 5 Airbus CC-150 Polaris, civilian Airbus A310-300s, originally owned by Wardair, and subsequently Canadian Airlines International, after the airlines merged. The aircraft were then sold to the Canadian Government and have been converted for use as the primary long distance transport aircraft as part of the Royal Canadian Air Force's fleet of Royal Canadian Air Force VIP aircraft.

Design

The Airbus A310 was a medium- to long-range twin-engined wide-body airliner. Initially a derivative of the A300, the aircraft had originally been designated the A300B10. It was essentially a shortened variant of the earlier aircraft; however, there were considerable differences between the two aircraft. Specifically, the fuselage possessed the same cross-section but being shorter than the A300, it provided capacity for a typical maximum of 200 passengers. The rear fuselage was heavily re-designed, featuring altered tapering, while involved a move aft of the rear bulkhead to create additional capacity; this same design change was later transferred back to later variants of the A300, such as the A300-600 and A330/A340 fuselages. The A310 also had a different emergency exit configuration, consisting of four main doors, and two smaller doors over the wings.
The wing of the A310 was redesigned, possessing a reduced span and wing area and incorporating simpler single-slotted Fowler flaps designed by British Aerospace shortly following its decision to join the Airbus consortium. Other changes to the wing included the elimination of the outer ailerons, which were occasionally referred to by the manufacturer as being "low speed ailerons", and the addition of electrically-actuated spoilers. The wing also featured common pylons, which were able to support all types of engines that were offered to customers to power the airliner. From 1985 onwards, later-built production A310s were equipped with wingtip fences for the purpose of reducing lift-induced drag. A limited number of alternations were also performed to the airliner's tail unit, such as the adoption of smaller horizontal tail surfaces.
The A310 was furnished with a two-crew glass cockpit configuration as standard, removing the requirement for a flight engineer; Airbus referred to this concept as the Forward-Facing Crew Cockpit. The company had developed the cockpit to significantly enhance the aircraft's man-machine interface, thereby improving operational safety. It was outfitted with an array of six computer-based CRT displays to provide the flight crew with centralised navigational, warning, monitoring, and general flight information in place of the more traditional analogue instrumentation and dials, which were used in conjunction with a range of modern electronic systems. The same flight deck had been incorporated into the A300-600, a move which increased commonality between the two types and enabled a dual type rating to be achieved, this same approach was later used on many future Airbus aircraft. In addition to the two flying crew, provisions for third and fourth crew seats were present upon the flight deck.
The A310 was initially launched with a choice of three engines – the General Electric CF6-80A, the Pratt & Whitney JT9D-7R4D1 and the Rolls-Royce RB211-524B4. The specific Rolls-Royce RB211-524B4 engine intended for this initial application was not developed. General Electric powered A310-200s were originally offered with the CF6-80A3, but with the introduction of the A310-300, the CF6-80C2 became available for both variants. The initial offering was for the CF6-80C2A2 engine and later on the higher thrust 80C2A8. Similarly Pratt & Whitney powered A310s were first offered with versions of the JT9D engines but when the PW4000 powered A310 became available in 1987, the aircraft was offered with the PW4152. From April 1992 the higher thrust PW4156A was offered for the A310, with the PW4158A /-326 becoming available from 1996.
The A310 was equipped with a modified undercarriage, derived from the A300; the landing gear were outfitted with carbon brakes, which were fitted as standard. The structure of the airliner featured a high level of composite materials throughout both primary and secondary structures, increased beyond that of the earlier A300. The A310 is outfitted with integrated drive electrical generators along with auxiliary power unit, which were improved versions of those used on the A300.

Variants

The A310 is available in two basic versions, the medium range −200 and the longer range −300. The first version of the aircraft to be developed was the −200 but this was later joined by the −300 which then became the standard production version of the aircraft. The short range -100 variant was never developed due to low demand.
;A310-200
;A310-200C
;A310-200F
;A310-300C
;A310-300F
;A310 MRT/MRTT

A310 Zero G

Operators

Civilian operators

As of April 2020, a small number of commercial airlines continue to use the A310:
;Passenger
;Cargo
The A310 is also used by the armed forces of the following countries:
By the end of production, a total of 255 A310s had been ordered and delivered.
Total1998199719961995199419931992199119901989198819871986198519841983
Deliveries255122222224191823282119262917

Accidents and incidents

As of September 2015 there have been 12 hull-loss accidents involving A310s with a total of 825 fatalities; and 9 hijackings with a total of five fatalities.

Aircraft model designations

ModelCertification DateEngines
A310-20311 March 1983GE CF6-80A3
A310-203C27 November 1984GE CF6-80A3
A310-20423 April 1986GE CF6-80C2A2
A310-22111 March 1983PW JT9D-7R4D1
A310-22222 September 1983PW JT9D-7R4E1
A310-30411 March 1986GE CF6-80C2A2
A310-3085 June 1991GE CF6-80C2A8/A2
A310-3225 December 1985PW JT9D-7R4E1
A310-32427 May 1987PW4152
A310-3256 March 1992PW4156A

Citations