Aircraft Radio Corporation


Aircraft Radio Corporation -- not to be confused with Aeronautical Radio, Inc. -- was a principal pioneer and major manufacturer of avionics for military and commercial aircraft, and later general aviation aircraft, from the 1920s to the 1950s—subsequently acquired and rebranded by a succession of other companies, each of whom changed the official name, of the enterprise, while initially continuing ARC's primary function, staffing, facilities and product focus.
Consequently, many in the aviation industry—including many within its current and former parent companies—have unofficially referred to ARC, by its original name, as a continuing specific entity, regardless of its official names or owners at any point in time.

Origins

ARC originated in 1924 in Boonton, New Jersey—a rural setting within sight of New York City—as the aircraft radio division of Radio Frequency Laboratories , which had started in 1922, in Boonton, as a radio-technology research organization, developing and holding numerous patents and employing such radio pioneers as Edward Weston, Lewis M. Hull and Stuart Ballantine. RFL developed technologies, but did not manufacture products. However, when it developed an aviation-radio division, in 1924, the division, ARC, soon outgrew its parent company, with the success of its aviation radios developed and manufactured in Boonton.

Independence

By 1927, Aircraft Radio Corporation, was a wholly owned subsidiary of Radio Frequency Laboratories, and was spun off as a separate company, producing navigation and communications radios for military, commercial and general aviation. ARC radios were considered mainstream, basic radios in their market segment, and were widely used. An airport was developed to accommodate the needs of the booming enterprise, on 116 acres near town.
In early 1929, an engineering conference at the Flying Field drew many people from the electronic instruments industry to celebrate the new ARC facility's opening and dedication, including a laboratory in Boonton, and a hangar at the Flying Field.

First "blind" flight

Pioneer aviator Jimmy Doolittle kept his plane at the ARC hangar, and teamed with ARC to accomplish the world's first "blind" landing -- landing an airplane solely by reference to instruments, the first milestone in developing today's all-weather instrument flight. ARC developed the radio-beam and onboard radio receiver navigation equipment essential to the flight, the first radio instrument landing system.
The system they developed led to the creation of their "Model B"—an early radio navigation system for the airlines.

Military success

A history of U.S. Navy radio research and development describes how little ARC beat out competitors far larger in the electronics world:
The GF/RU, a derivative of the civilian Model B, was chosen as America's standard military aircraft radio of the early 1930s.
By 1933, ARC-designed radios were being installed in the 1st fighter squadrons of the U.S. Army Air Corps and U.S. Navy.
By 1934, the company had its own airfield and airplane (a Berliner parasol monoplane, for experimentation.
The ARC-designed BC375 communications radio was soon followed by the AN/ARC-5 communications radio system, which was a leading suite of Allied airborne electronics equipment during World War II.

Wartime

In the 1940s, ARC radios were everywhere in U.S. military aircraft. Lewis Hull served as ARC President.

Postwar

The military avionics market evaporated after World War II, and ARC found itself outmaneuvered in commercial airline radios by Bendix Corp. and Collins. The postwar collapse of the light plane industry took their last market, and for the first time, ARC was losing money. The Korean War changed that—driving up demand for their military radios, but, again, when the war ended, ARC struggled. The situation was exacerbated by key engineers leaving to start their own enterprises.
An engagement with Laurence and David Rockefeller. to work on a secret military radar system, led to the Rockefeller family buying controlling interest in ARC, and their tampering with its independent status. and Litton Industries got involved. Stock values fluctuated, burning some.

Cessna acquires ARC

In 1959, ARC was acquired by one of its principal customers, Cessna Aircraft Company, the world's highest-volume airplane manufacturer. Cessna, while retaining the name and quasi-independent status of Aircraft Radio Corporation, rebranded the company's products as "Cessna avionics," and the enterprise began a notorious decline in product quality, resulting in high prouduct-failure rates and a terrible reputation in the aviation industry —which ARC nevertheless survived through its key position as the in-house supplier of the "factory standard" avionics for Cessna, world leader in light aircraft.
During this time, ARC's "Cessna" avionics line expanded and diversified radically to include most types of avionics for light planes, including NAV, COM, ADF, DME and Marker beacon radios and autopilots—all most the low end of the quality spectrum.
In the mid-1970s, during a period of exceptionally high productivity for Cessna, ARC was entangled in a legal battle with its employee's union, which resulted in a 1975 judgement favoring ARC. During the proceedings, the following findings emerged as public record in the published decision of the U.S. Court of Appeals for the Third Circuit:
title of the case named ARC as "Aircraft Radio Corporation -- implying a legally distinct entity, while the appeals court decision, under that original case name, repeatedly refers to ARC in the body of the ruling as "Aircraft Radio Company," implying an identity less certainly distinct from its parent company, Cessna—a fact that changed during the litigation, apparently sometime afer a September, 1973 letter from parent Cessna, of which the Court notes...:
The ARC identity issue, though—and the timing of ARC's names—is further confused by this 1978 statement in a judge's memorandum in a lawsuit over Cessna's marketing of its avionics:
Other sources, including a Cessna job ad in 1981, also indicate that Cessna, at one time, referred to ARC as "Aircraft Radio and Control - Cessna's avionics division."
At its peak, ARC employed around 3,500 workers. Among the senior personnel during the Cessna years, Floyd Piper served as chief engineer and chief systems engineer., and, November, 1981, John Ferrara was Manager of Advanced Development. In 1981, the ARC had an employee flying club at the company's private airfield adjacent to the factory.

Sperry / Unisys / Honeywell acquires ARC

In late 1983, Cessna finally unloaded its now-unpopular avionics subsidiary onto rival avionics maker Sperry, who, in turn was acquired by Unisys, then Honeywell, Inc.. Sperry decided to relocate ARC to Sperry's Phoenix, Arizona facility, ending 57 years of ARC's avionics development and production in Boonton. The ARC relationship didn't last long. On September 1, 1987, Honeywell handed ARC off to Sigma Tek, Inc.

Sigma Tek acquires ARC

On September 1, 1987, Sigma Tek, Inc. bought Aircraft Radio Corporation from Honeywell, Inc. Through ARC, Sigma Tek now services and supports nearly all of the avionics and flight control systems for Cessna Aircraft.

ARC Avionics Corporation

ARC Avionics Corporation claims to be "successor to Aircraft Radio Corporation." Apparent press releases published in Aerospace and Defense Technology and in Avionics magazine describes it as "a wholly-owned business unit" owned by AirSpeed Engineering.
The ARC Avionics Corp. website indicates it is based in Kirkland and Everett, Washington. However, Aviation Maintenance Magazine lists the company as being based at a street address in Miami Springs, Florida, and the Aircraft Electronics Association also lists it in Miami Springs, at the same phone number, but as "Aircraft Radio & Avionics LLC," at a Post Office box.
That company says it primarily works in commercial and military aircraft technical services. with capabilities for test, repair, overhaul and calibration of navigation, communications and avionics instruments, as well as "hydraulic, mechanical, electro-mechanical" accessories and components for "commercial... military, corporate and general aviation, fixed and rotary wing aircraft." Its press releases and reports, published in major industry magazines and news sites, indicate the company is active in fitting electronics to Boeing 737 jetliners.
According to their website, ARC Avionics has operated "continuously since 1980," and has operated as an FAA-Certified Repair Station and EASA Repair Station. Further, the site claims that ARC Avionics has FAA Parts Manufacturing Approval certification to install and build STC kits, having "manufactured kits and parts" for various Supplemental Type Certificates held by ARC, as well as other STCs licensed under design approval agreements with FAA 8130-3 approvals.