Antarctic Snow Cruiser
The Antarctic Snow Cruiser was a vehicle designed from 1937 to 1939 under the direction of Thomas Poulter, intended to facilitate transport in Antarctica during the United States Antarctic Service Expedition. The Snow Cruiser was also known as "The Penguin," "Penguin 1" or "Turtle" in some published material.
Poulter had been second in command of Byrd's Second Antarctic Expedition, launched in 1934. From his time in the Antarctic, Poulter had devised several innovative features. However, the massive Snow Cruiser generally failed to operate as hoped under the difficult conditions and was eventually abandoned in Antarctica. Rediscovered under a deep layer of snow in 1958, it later disappeared again due to shifting ice conditions.
History
Design and construction
On April 29, 1939, Poulter and The Research Foundation of the Armour Institute of Technology showed the plans to officials in Washington, D.C.. The foundation would finance the cost and oversee the construction, and lend the vehicle to the United States Antarctic Service. Work began on August 8, 1939, and lasted for 11 weeks. On October 24, 1939, the vehicle was fired up for the first time at the Pullman Company just south of Chicago and began the journey to the Boston Army Wharf. During the trip, a damaged steering system caused the vehicle to drive off a small bridge on the Lincoln Highway and into a stream near the town of Gomer, Ohio, near Lima, Ohio, where it remained for three days. After it arrived in Boston, it departed for Antarctica on November 15, 1939, aboard the USCGC North Star.Arrival in the Antarctic
The Snow Cruiser arrived at Little America in the Bay of Whales, Antarctica with United States Antarctic Service Expedition in early January 1940 and experienced many problems. It was necessary to construct a ramp from timber to unload the vehicle. As the vehicle was unloaded from the ship, one of the wheels broke through the ramp. The crew cheered when Poulter powered the vehicle free from the ramp but the cheers fell silent when the vehicle failed to move through the snow and ice. The large, smooth, treadless tires were originally designed for a large swamp vehicle; they spun freely and provided very little forward movement, sinking as much as into the snow. The crew attached the two spare tires to the front wheels of the vehicle and installed chains on the rear wheels, but were unable to overcome the lack of traction. The crew later found that the tires produced more traction when driven backwards. The longest trek was - driven completely in reverse. On January 24, 1940, Poulter returned to the United States, leaving F. Alton Wade in charge of a partial crew. The scientists conducted seismologic experiments, cosmic-ray measurements, and ice core sampling while living in the snow- and timber-covered Snow Cruiser. Funding for the project was canceled as the focus in the United States became World War II.Rediscovery and final fate
During Operation Highjump in late 1946, an expedition team found the vehicle and discovered it needed only air in the tires and some servicing to make it operational. In 1958, an international expedition uncovered the snow cruiser using a bulldozer. It was covered by several feet of snow but a long bamboo pole marked its position. They were able to excavate to the bottom of the wheels and accurately measure the amount of snowfall since it was abandoned. Inside, the vehicle was exactly as the crew had left it, with papers, magazines, and cigarettes scattered all around.Later expeditions reported no trace of the vehicle. Although there was some unsubstantiated speculation that the Snow Cruiser was taken by the Soviet Union during the Cold War, the vehicle most likely is either at the bottom of the Southern Ocean or buried deep under snow and ice. Antarctic ice is in constant motion and the ice shelf is constantly moving out to sea. In the mid-1960s, a large chunk of the Ross Ice Shelf broke off and drifted away; the break occurred right through Little America. It is not known on which side of the ice shelf the Snow Cruiser was located.
Vehicle details
| Attribute | Description |
| Configuration | Diesel-Electric Hybrid |
| Diesel Engine Manufacturer and Model | Cummins H-6 engine |
| Diesel Engine Power Rating | @ 1800 rpm - total combined power for 2 engines |
| Diesel Engine Configuration | 6-cylinder inline; naturally aspirated |
| Diesel Engine Displacement | |
| Diesel Engine Bore and Stroke | bore x stroke |
| Electric Generators | General Electric |
| Electric Drive Motor Manufacturer | General Electric |
| Electric Drive Motor Power Rating | - total combined power for 4 motors |
| Tire Manufacturer | Goodyear Tire and Rubber Company |
| Tire Dimensions | outer diameter x inner diameter x width |
Innovative features
Innovative features included:- Wheels and tires retracted into housings where they were heated by engine exhaust gases. This was to prevent low-temperature cracking of the natural rubber compound.
- Long front and rear overhangs on the body were to assist with crossing crevasses up to wide. The front wheels were to be retracted so the front could be pushed across the crevasse. The front wheels were then to be extended to pull the vehicle the rest of the way across. This process required a complicated, 20-step procedure.
- A pad on top of the vehicle was designed to hold a small aircraft. A winch would pull the aircraft into place. The plane was to be used to conduct aerial surveys.
- Engine coolant circulated through the entire cabin for heating. The heating system was very efficient and the crew reported that they needed only light blankets when sleeping.
- Excess electrical power could be stored in batteries for running lights and equipment when the engine was not running.
- The diesel-electric drive train allowed for smaller engines and more space for the crew, due to the elimination of large mechanical drive components throughout the vehicle. This is possibly the first application of a diesel-electric powertrain in a four-wheeled vehicle of this size; this design is now common in large modern mining trucks.