In 1912, Arizona state engineer Lamar Cobb surveyed two different locations to construct an auto bridge over the Gila River. One location was near the town of Dome while the other was located further east along the river at the base of Antelope Hill. Cobb chose the latter as the preferred site for a new bridge. In 1913, engineers working within Cobb's office designed a multiple span concrete girder bridge, with the concrete sections measuring in length. This did not include the length of the approach spans to be constructed of timber trestle structures. The longest single-span would measure long. In total, the new bridge would have 15 separate spans. Guard rails on the bridge would be constructed from steel piping. Cobb opened competitive bidding for the bridge in December 1913. However, the state initially rejected every bid, wishing to use prison labor to construct the bridge instead of contracted labor. The bridge had to be redesigned when Cobb calculated there wasn't an adequate amount of manpower in the Arizona prison system to match the project's size. Having reworked his original plans, Cobb once again opened the project to competitive bidding, awarding the contract to an individual named Parry Borchers in 1914. Construction began in June 1914 but stopped soon afterward due to Borchers defaulting on his loans. Several months later, a winter flood badly damaged the incomplete structure. Borchers' failure to complete the project resulted in the state taking over construction and completing the bridge using prison labor. The Antelope Hill Highway Bridge was finally opened to traffic on August 18, 1915. The event was marked with a celebratory gala picnic attended by thousands of individuals. The bridge was originally part of the main highway between Yuma and Phoenix, known as the Ocean to Ocean Highway. The route also carried several auto trails such as the Dixie Overland Highway, Bankhead Highway and Old Spanish Trail. It was partly rebuilt in 1917-1918 after the 1916 flood washed away the northern approach to the bridge; the modification added five more concrete spans and a wooden trestle. Washouts and destruction of the bridge by flooding were common due to its placement on a weak soil area along the Gila River floodplain. Damage to the bridge came to be expected every time a major flood event occurred on the lower Gila River. Two particularly large floods in November 1919 and February 1920 not only damaged the bridge but completely submerged it as well as washed out a large section of the highway it served. This lead to the Arizona Highway Department deciding to construct an entirely different route to bypass the floodplain all together. In 1922, construction of an alternate route through Gila Bend was completed. The new route crossed the Gila River with a concrete apron at the foot of the Gillespie Dam. The apron itself would be replaced five years later by the new Gillespie Dam Bridge. This effectively ended the purpose for which the Antelope Hill Highway Bridge was constructed. The alternate route became the new main highway to Phoenix and was designated as part of U.S. Route 80 in 1926. US 80 would later be replaced by Interstate 8. Despite no longer being the main route between Yuma and Phoenix, the Antelope Hill Highway Bridge was still utilized as the main route for traffic traveling north from Yuma. However, costly flood damage continued, causing the Antelope Hill Highway Bridge to be completely abandoned in 1929. It replaced by the McPhaul Suspension Bridge as the main north/south auto connection from Yuma. The new bridge later became part of U.S. Route 95 before being abandoned itself. Despite total abandonment, the Antelope Hill Highway Bridge has been listed on the National Register of Historic Places since June 28, 1979. Where the replacement McPhaul Bridge and Gillespie Dam Bridge are still intact, the years of flood damage and abandonment have left what remains of the Antelope Hill Highway Bridge in ruins. The remains of the Antelope Hill Highway Bridge can be accessed by foot from Roll Road, but are impassible to vehicles. The Antelope Hill Highway Bridge is one of only three surviving twin concrete girder bridges in Arizona, with the other two being the Santa Cruz Bridge and Hell Canyon Bridge.
