Arnoux system


The Arnoux system is a train articulation system, for turning on railroad tracks, invented by Jean-Claude-Républicain Arnoux and patented in France in 1838. Arnoux was the chief engineer of the Ligne de Sceaux which was originally built with very tight radii in the area around Sceaux, Hauts-de-Seine.
With the support of the French Academy of Sciences, Arnoux devised a new articulation system that allowed train wheels to turn, the système ferroviaire dit Arnoux, and the Ligne de Sceaux was built to test his prototypes. The line started commercial use in 1846. But the operating cost and the use of a broad gauge of meant it was not taken up more widely. Invention of the bogie made it redundant. It was abandoned entirely by 1893.

System

Problem

When steam railways were in their infancy, trains comprised a steam locomotive and one or more railway carriages with two fixed axles. As speeds increased, this design caused significant wear to the track and instability in the track ballast.

Proposed solution

To ameliorate these faults, Arnoux proposed a system of essieux articulés whereby the yaw angle of the wheels was reduced essentially to zero. Arnoux adapted the system used on horse-carts, which pivoted each axle at its centre, to be applied equally over the two axles together.
Arnoux devised a system of chains and pulleys so that each of the wheels' correctly adjusted in yaw through the curve: as soon as the leading axle started to turn, all other axles would also turn by the same amount. Actually, this was a fatal design flaw since in a long train not all carriages are on the same part of the curve. A compromise was to use pulleys of different diameters, with guide wheels on the locomotive to control their motion. Also, using a broad gauge of was expected to give greater stability.
This system was not suitable for steam locomotives so Arnoux invented a separate system for them. The locomotives had a 2-4-2 wheel arrangement and the driving wheels were flangeless. The carrying wheels were arranged to pivot and were controlled by near-horizontal guide wheels.

Patent application

Arnoux applied for his patent, number 8342, on 28 March 1838.

Practical application

Trials and the Grand Prix de l'Institut

Trials took place at Saint-Mandé between 1839 and 1840 in a circuit constructed by Alexis Dulong. These trials successfully demonstrated the stability and safety of the system. Public bodies, the Duke of Aumale and numerous members of the French Academy of Sciences, including François Arago. All unanimously praised the system.
After this experience, Arnoux was awarded the Grand Prix de Mécanique by the Institute.

Concession & opening of the Ligne de Sceaux

At the suggestion of François Arago, the Arnoux system was implemented on the Ligne de Sceaux from Paris to Sceaux, Hauts-de-Seine. On 5 September 1844, Arnoux and the Minister of Public Works signed a contract to build and operate the line.
The line began service in 1846, starting from the Barrière d'enfer with a curved passenger building of radius on a balloon loop to allow trains to reverse direction. The route then had its first stop at Arcueil, then Bourg-la-Reine on a radius curve. The incline towards Sceaux was straight until the station at Fontenay-aux-Roses, then had a succession of curves at ; the gradient was up to 11 mm/m, which was significant. All together the line was long.

Alternatives

In fact, the problem was solved by the bogie, which was invented in the USA shortly after opening, but this was unknown in Europe at the time.
The Arnoux system bears some similarity to Cleminson's patent system. Both are designed to keep the axles radial to the curvature of the track.

Abandonment

Use of the Arnoux System from Paris to Limours was abandoned in 1883 during negotiations with the government and the Compagnie du Chemin de Fer d'Orléans à Rouen for construction of new lines. and the Ligne de Sceaux was the only one built to its design, with its unusual track gauge and specific construction of carriages and locomotives. The track was replaced overnight with standard gauge in May 1891.