Avalanche transceiver


An avalanche transceiver or avalanche beacon is a type of emergency locator beacon, a radio transceiver operating at 457 kHz for the purpose of finding people buried under snow. They are widely carried by skiers, particularly cross-country skiers for use in case a skier is buried by an avalanche. When the owner sets out on a skiing descent, the transmitter is activated, causing the device to emit a low-power pulsed radio signal during the trip. Following an avalanche, if some members of the ski party are buried, the others may switch their transceivers from transmit into receive mode, allowing use as a radio direction finding device to search for signals coming from the lost skiers. The avalanche beacon is an active device powered by batteries; a ski suit may also contain a passive RECCO transponder sewn into the clothing.
Early avalanche transceivers transmitted at 2.275 kHz. In 1986, the international frequency standard of 457 kHz was adopted, and this remains the standard today. Many companies manufacture transceivers that comply with this standard.
An avalanche transceiver is not considered a preventive measure against possible avalanche burial, but rather it is a way to reduce the amount of time buried and in the end save their lives.

History

In 1968, Dr. John Lawton invented the first effective avalanche transceiver at Cornell Aeronautical Laboratory in Buffalo, New York, with the first units being sold in 1971 under the “Skadi” brand name. This unit, functioning at 2.275 kHz, converted the radio frequency to a simple tone audible to the human ear. By following the tone to where it was loudest, the transceiver operator could use it to locate the buried transceiver by using a grid searching technique.
In 1986, IKAR adopted the frequency of 457 kHz. In 1996 ASTM adopted the 457 kHz standard.
The following are the currently accepted international standards for Avalanche Transceivers operating on the 457 kHz frequency.
Now that the frequency 457 kHz had become an international standard, and the problems of range had been discussed and analyzed, everyone was most interested in ease of use. With a new generation of entirely automatic apparatuses existing on the market containing a microprocessor that analyzed the beacon's signals or pulses to determine both the direction and distance of the victim, a new digital age was born. In 1997, the first digital beacon was introduced at the Winter Outdoor Retailer show by Backcountry Access under the brand name "Tracker". The Tracker DTS soon became the most widely used beacon in North America, and is still sold and used by many backcountry enthusiasts. Today, consumers have a wide range of choices for digital beacons from companies like Ortovox, Arva, Pieps, Mammut, and Backcountry Access. Although beacon technology is constantly evolving and improving, practicing and being familiar with your beacon remains the most important aspect for performing timely rescues and preventing avalanche fatalities.

Types of beacons

There are two types of avalanche beacons: digital and analog. They both adhere to the international standard as described above, and only differ in the method used to indicate to the user where the buried beacon is located. Most beacons currently being sold are digital, because of their enhanced ease of use and higher recovery rates.

Analog

The original avalanche beacon was an analog beacon which transmitted the pulsed signal as an audible tone to the user. The tone gets louder when the user is closer to the transmitting beacon. These beacons have also been augmented with LEDs that provide a visual indication of signal strength, and earpieces to increase the ability of the listener to hear the tone.

Digital

Digital transceivers take the strength of the signal and the emitted dipole flux pattern and compute distance and direction to the buried transceiver. In order to calculate the emitted dipole flux pattern, a digital transceiver must have at least two antennas, although most modern transceivers have three. The digital beacons will then indicate the direction to the victim's beacon as an arrow on the display, and provide audio cues such as varying pitch or frequency. Most low- to mid-range beacons have a segmented arrow capable of pointing in five to eight forward directions only, displaying a 'U-Turn' indicator if the user is traveling away from the victim. Higher end beacons such as the Mammut® Pulse Barryvox and Arva® Link are equipped with a digital compass and free-flowing arrow, facilitating more exact direction finding, even rotating to maintain direction between pulses of the transmitting beacon. In addition, many higher end beacons can point to victims 360°, including behind the user if the user is moving in the wrong direction. Many digital beacons are also capable of being used in analog mode for more advanced rescuers, or to enhance reception range.

W-Link

Several high-end digital beacons are also equipped with a secondary "supplementary" frequency referred to as W-Link. This frequency broadcasts additional details to other transceivers capable of receiving the W-Link signal. Advertised brand-independent features of W-Link include:
Beacons transmitting on the W-Link frequency send a specific device code to assist in isolating and pinpointing multiple signals, and facilitate all of the above features. Certain beacons like the Mammut® Pulse Barryvox also detect micro-movements in the user, including the minuscule movement generated by a heart beat. These beacons will transmit this information across the W-Link frequency, so that any user with another W-Link capable transceiver can determine whether or not a buried victim is alive, and formulate rescue triage based on that situation. The idea behind this is that if everyone in a group is wearing a vitals-capable W-Link transceiver and some group members are buried in an avalanche, the remaining group members will be able to determine which of the buried victims are still alive, and focus rescue efforts on those members.
To compensate for group members without vitals-capable beacons, the rescuer's W-Link beacon will often display two indicators on the display for each victim. One indicator shows that a victim's beacon is transmitting on the W-Link frequency while another shows that the victim is moving. This helps mitigate the potential risk of mis-categorizing an alive victim as dead because their beacon is not transmitting vitals data, and thus the rescuer does not see the "alive" indicator on their transceiver.

Controversies of W-Link

As a universal rule, W-Link capable transceivers do not display personally identifiable characteristics of the buried victims, although they are capable of doing this. This is to eliminate conflicts of interest in rescue situations where a rescuer may choose to save one person before another, even if another person is closer or easier to rescue. By not identifying any buried victims, the rescuer is not left with a decision of which person to save, and are spared the moral implications and consequences of his or her choices. Critics of the W-Link system, especially of the vitals-detecting transceivers, argue that even without offering personally identifiable information, the W-Link transceivers still present moral implications, and complicate rescue efforts because these transceivers will distinguish between W-Link capable and incapable victims with an indicator on the display, further segregating victims with a vitals-data capable beacons. Critics argue that this leads to an unfair distribution of rescue resources and personnel to persons with higher-end or newer transceivers, and deprives everyone of an equal chance for rescue. For this reason transceiver manufacturer Arva Equipment has elected to omit received vitals data from being displayed on their Link transceiver, although the beacon does transmit them. A scenario that W-Link critics will use to exemplify their point is as follows:
A four-person group goes on a backcountry tour into avalanche terrain. A husband and his wife are both equipped with the same W-Link, vitals-sensing transceiver. They just met the other two group members the day before. One of them has a basic digital beacon, and the other has a modern, digital W-Link beacon that does not transmit vitals data. Along their tour, three of the group members are caught in an avalanche, leaving only the husband to rescue them. He quickly activates his transceiver and it gets a lock on all three victims. The display shows two beacons 10 and 12 meters directly in front of him, one with W-Link signal and one with regular signal only. It also shows one beacon 33 meters behind him transmitting W-Link and vitals data saying the victim is alive.

In this scenario, it is clear to distinguish between all three victims even though the transceiver does not display their names; his wife is 33 meters behind him, while the other two people he just met are much closer, and close together, as well. The moral implications are that the man will either choose to save his wife, likely at the expense of the other two group members' lives, or he will choose to rescue one or both of the other group members, allowing his wife to die. In a rescue situation without the additional information, a competent rescuer would make the rational choice of initially rescuing the two closer victims. If the husband makes this choice, he will have chosen to not put his wife's life first, possibly resulting in her death, and will have to live with that for the rest of his life.

Frequencies and technical information

The W-Link frequency in use varies based on geographical location. Currently the frequencies are 869.8 MHz in Region A and 916-926 MHz in Region B. Region A consists of the majority of the European Union, Sweden, Norway, Greenland, Iceland, and other countries in that vicinity. Region B consists of Canada and the United States. W-Link frequencies are not permitted for use in Russia, China, India, Australia, New Zealand, Japan, and other various countries in Asia and Eastern Europe. Users may disable W-Link capabilities on their individual beacon when traveling to these countries, although switching between Regions B and A may require servicing by an authorized retailer.

Search techniques

Due to the highly directional nature of the 457 kHz signal at the ranges common for avalanche burial, there have been many techniques developed to search for buried beacons. Good beacon search abilities are considered a required skill for recreational backcountry skiers, mountaineers as well as avalanche professionals such as ski guides, ski patrollers, search and rescue volunteers and professionals. Recreationalists and professionals alike take part in drills, practice and scenarios as a regular part of avalanche skills training.
The burial of a single beacon may involve search using one of several methods:
These search methods are adapted and extrapolated to scenarios where there is more than one burial.