Beardmore Cyclone


The Beardmore Cyclone was an aero engine produced by William Beardmore & Co with the aim of producing an engine generating a high power output at low revolutions by designing an engine of large displacement. The design did not enter volume production.

Design and development

The Cyclone was an upright inline six-cylinder water-cooled engine with a bore of and stroke of stroke, giving a displacement of. It had a combined crankcase and cylinder block made of aluminium with steel cylinder liners and aluminium pistons. Each cylinder had its own detachable head, with two spark plugs and four valves operated by push-rods driven by a single camshaft. The compression ratio was 5.25 to 1.
The Cyclone was first run in 1922, producing 700 hp at 1,220 rpm. Further development increased output to 850 hp at 1,350 rpm but could produce 950 hp at the same rpm with a larger carburettor.

Variants

The Beardmore Typhoon was an inverted version of the Cyclone, with almost all parts being interchangeable between the two engines. It was test flown in Avro Aldershot J6852 in January 1927.
A compression ignition version of the Typhoon was projected and was the original choice of power-plant for the R101 airship, but this version proved impractical.

Specifications