Bender Machine Works


The Bender Machine Works in Hayward, Wisconsin, is a dairy equipment manufacturer that played a major role in the history of the dairy farming business in the United States from the 1950s to the 1980s, producing milk pipeline and milk transfer cart components, and washing/vacuum-releasing equipment.
The company continues to be in business but now focuses its manufacturing on private label electromechanical milk pipeline washing systems.

Washer/Releaser and Step-Saver

The Bender Washer/Releaser was a vacuum-operated device first invented and patented by Lloyd Bender of Hayward, WI, USA in the 1950s, used to both wash dairy milking equipment and to transfer milk from piping containing a vacuum, into a storage tank at normal atmospheric pressure.
As a non-electric pneumatically operated device, the washer/releaser could be used on small dairy farms without electricity that used an engine to supply milking vacuum, and used well water to cool milk.
The Washer/Releaser could be used in association with both dairy pipelines and the Step-Saver, a milk transfer cart used with bucket milkers. The Step-Saver and the Washer/Releaser were once extremely common in the 1960s to 1980s on small family dairy farms in the United States, to reduce the labor of bucket milking before the milk pipeline became more popular.

Purpose and Usage


As barns began to increase in size from perhaps 6 to 12 cows to 30 or 40 cows, the bucket milker became a very laborious milking system. As the barn length increased, the farmer had to walk an increasing distance from the cow to the milk bulk tank to dump the collected milk. An early vacuum milk-transport system known as the Step-Saver was developed to save the farmer the trouble of carrying the heavy steel buckets of milk all the way back to the storage tank in the milkhouse. The system used a very long vacuum hose coiled around a receiver cart, and connected to a vacuum-breaker device in the milkhouse.
Following milking each cow, the bucket milker would be dumped into the receiver cart. A foot pedal on the base of the cart lifted the cover, which kept contaminating dust and debris out of the cart, and allowed the farmer to hold the heavy bucket milker with both hands while pouring. A diffuser plate in the top of the cart prevented milk from splashing out while rapidly pouring the milk, and a large filter disk under the diffuser removed any debris from the milk.
Milk collected in a chamber below the filter, and was slowly sucked through the long hose to the milkhouse. When empty, a large float ball in the bottom of the cart would settle down over the drain hole to seal the line and retain system vacuum. When milk was poured into the cart, the ball would float up, unsealing the drain.
An automatic vacuum breaker in the milkhouse cyclically pulled milk from the cart into a glass jar using system vacuum, followed by a release of vacuum to atmospheric pressure, allowing the milk to flow into the bulk tank by gravity flow. When the float level in the jar dropped to setpoint, system vacuum was reapplied to restart the process. Check valves on the vacuum breaker milk hose prevented milk from flowing backwards to the cart when the jar vacuum was released.
As the farmer milked the cows in series, the cart would be rolled further down the center aisle, the long milk hose unwrapped from the cart, and hung on open hooks along the ceiling of the aisle.

Wisconsin legislative code references

Use of the step saver and similar non-pipeline milk transfer systems is described in the legislative code of the Wisconsin Department of Agriculture, Trade, and Consumer Protection.

Continued usage of the washer/releaser

The Bender washer/releaser patents have long expired and so now anyone is free to manufacture the system components. Replacement gaskets for the original equipment, and entire new washer/releaser hardware are being produced today by other equipment companies.

Maple syrup production and sap collection

The washer/releaser has found new applications for maple syrup production. In the past, maple sap was collected using gravity flow and weeping of sap from tap holes drilled into trees. It was eventually discovered that much more sap could be collected from trees by attaching a vacuum hose to the tree, which results in higher sap collection. The vacuum collection does not appear to harm the tree.
The washer/releaser has a particular advantage that it is not electrically powered, which allows it to be installed outdoors in an extremely remote location, next to a large sap collection tank that is at normal atmospheric pressure. Only a small low-flow vacuum line needs to be provided at the collection point, with a small vacuum buffer tank to quickly restore vacuum after the releaser has emptied.
The standard vacuum for dairy use is 15 inches or 38 centimeters of mercury. A higher vacuum will cause injury and lesions to the cellular structure of cow teats. For maple application, 30 inches or 76 centimeters of vacuum does not cause harm to the tree. The original washer/releaser works fine with this much higher system vacuum.
Maple syrup requires a large ratio of sap to produce the final syrup product. Due to this, much larger versions of the washer/releaser are used for large scale sap collection. The smaller original dairy versions can also be connected in parallel to provide higher volume sap flow.

Electromechanical pipeline washing

The Bender Machine Works also developed some of the first automated "wash-in-place" milk pipeline systems, which is generally constructed similar to an automatic dishwasher with automated fill, drain, soap dispensing, and various wash cycles. They continue to manufacture these washing systems today.
. See :File:Milk pipeline washing ff 0.25 320x240 vid 3 aud 1.ogv|file description for larger and higher quality versions of this video.

Patents

Step saver related