Bicycle boulevard
A bicycle boulevard, sometimes referred to as a neighborhood greenway, neighborway, neighborhood bikeway or neighborhood byway is a type of bikeway composed of a low-speed street which has been "optimized" for bicycle traffic. Bicycle boulevards discourage cut-through motor-vehicle traffic but allow local motor-vehicle traffic. They are designed to give priority to bicyclists as through-going traffic. They are intended as a low-cost, politically popular way to create a connected network of streets with good bicyclist comfort and/or safety.
Bicycle boulevards attempt to achieve several goals:
- discouragement of non-local motor vehicle traffic;
- low speed limits;
- low motor-vehicle traffic volumes;
- free-flow travel for bikes by assigning the right-of-way to the bicycle boulevard at intersections wherever possible;
- traffic control to help bicycles cross major arterial roads;
- a distinctive look and/or ambiance such that cyclists become aware of the existence of the bike boulevard and motorists are alerted that the street is a priority route for bicyclists; and,
- enhanced environment due to the promotion of bicycle usage.
Features
A bicycle boulevard is generally marked with a sign at the beginning and the end of the bicycle boulevard. Also necessary for the road to be called a bicycle boulevard is coloring; in the Netherlands, the parts of the road where the cyclists ride on is marked in red. These sections of the road are called rabatstroken. Motorists also ride on this section, yet also have a non-colored part of the road which they can drive on with one half of the car when they wish to pass a cyclist.Bicycle boulevards may use a variety of traffic calming elements to achieve a safe environment. This makes it difficult for motorists to use the street at a high speed. However, they do not block access to motor vehicles completely which would designate the route as segregated cycle facilities rather than a bicycle boulevard.
Some bicycle boulevards have higher road surface standards than other residential streets, and encourage riders to use the full lane, encouraging parity between bicycles and motor vehicles.
Discouraging non-local motor vehicle traffic
Permeable barriers such as bollards are sometimes used to allow cycling traffic to continue through while diverting motorized traffic from using the street as a through street.Locations
United States
Bicycle boulevards can be found in a growing number of United States cities, including:- Arizona: Tucson
- California: Palo Alto, Berkeley, Emeryville, San Luis Obispo, Long Beach
- Florida: Gainesville
- Kansas: Manhattan
- Minnesota: Minneapolis, Saint Paul
- Missouri: Columbia
- New Mexico: Albuquerque
- North Carolina: Wilmington
- Oregon: Portland, Eugene, and Bend
- Oklahoma: Tulsa
- Washington: Seattle
- Wisconsin: Madison
In Berkeley, boulevards are mostly residential streets, but some sections pass through commercial areas. Generally, there are few cars on these streets, in large part because of the pre-existing traffic calming devices that slow and/or divert traffic. Bicycle boulevards may or may not have bicycle lanes.
In Minneapolis, a grant from the federal government within the Non-Motorized Pilot Program helped to build a bike boulevard on Bryant Avenue and the planning of others.
Similarly in Columbia, Non-Motorized Pilot Program project helped fund the first bike boulevard in Missouri along Ash and Windsor Streets. At least one other was planned.
In Wilmington, help from a Fit Community 2009 grant through the North Carolina Health
and Wellness Trust Fund enabled the City of Wilmington to construct North Carolina's first bicycle boulevard. The Ann Street Bicycle Boulevard runs from South Water Street to South 15th Street and serves as part of the much longer River to the Sea Bikeway, which connects downtown Wilmington to Wrightsville Beach.
In Portland, a $600 million 20-year plan has the goal of making 25 percent of trips in the city be by bicycle through the establishment of of new bikeways; one of the projects within the plan is to combine the work on street features that reduce stormwater runoff with the construction of curb extensions and other components of bicycle boulevards.
In Albuquerque, a city with more than of on-street bicycle facilities and multi-use trails, the grand opening of the first bicycle boulevard in New Mexico was held on April 14, 2009. The bicycle boulevard runs from San Mateo Blvd SE, west along Silver Ave SE/SW to 14th St SW. It then continues north on 14th St to Mountain Rd NW. The last leg continues west on Mountain Rd NW to the Paseo del Bosque Recreation Trail which parallels the Rio Grande.
In Madison, the first full bicycle boulevard spans East Mifflin Street in Madisons Tenney-Lapham Neighborhood, a second spans the entire length of Kendall Avenue in University Heights and the Regent Neighborhood.
In Seattle, the city is implementing a city-wide network of "Neighborhood Greenways". The work is being carried out with the aid and cooperation of the non-profit "Seattle Neighborhood Greenways".
US naming conventions
The City of Berkeley, California, is credited with coining the phrase "Bicycle Boulevard" in the late 1980s, but not every jurisdiction has adopted this term. In November 2011, the City of Boston began to use the term "Neighborways" instead of Bicycle Boulevards. This added to a growing list of terms for Bicycle Boulevards since Portland has been calling them "Neighborhood Greenways"; Seattle has followed the same convention.Other terms for bicycle boulevards in the US include:
- Cyclestreets
- Bike Boulevards
- Quiet Streets
- Neighborhood Byways
- Bicycle Friendly Streets
- Bicycle Friendly Corridors
- Bicycle Parkways
- Neighborhood Parkways
- Bicycle Greenways
International examples
Netherlands
In the Netherlands, have a similar road design — although most residential streets in the Netherlands which do not have on-road bike lanes or segregated bike lanes would fit the American definition of bicycle boulevards. A fietsstraat can link dedicated bike-only paths, service roads, and other types of bike-friendly street configurations to complete a route.In Amsterdam for example, by 2005 about 40% of journeys were by bicycle and transport planners at the Dienst Infrastructuur Verkeer en Vervoer have adopted a bicycle policy that blends many different bike-friendly street designs such as segregated bicycle lanes, on-road bicycle lanes, and fietsstraat streets, among others. The general concept is that cyclists can integrate relatively safely with vehicular traffic that is travelling at, or below, but that segregated bike lanes should be installed along roads with a higher speed limit. With these, and many other, bike-friendly policies in place, Amsterdam has the highest rate of cycling of any capital city in the world. Cyclestreets are also on the rise in other cities within the country, including Utrecht.
Germany
In Germany a comparable road design is called , introduced into the Highway Code in 1997.Belgium
In Belgium, the rue cyclable or , was introduced into the Highway Code with effect from 13 February 2012. One had earlier been introduced in the Visserij in Ghent in the summer of 2011. The first one appeared in Brussels in 2013 on a service road alongside Avenue Louise.The and also the on this subject may be of interest to reader.