A bitterant is a chemical that is added to a product to make it smell or tastebitter. Bitterants are commonly used as aversive agents to discourage the inhalation or ingestion of toxic substances.
Bitterants are used in antifreeze to prevent pet and child poisonings. It is required by law in some places.
Gas dusters often use a bitterant to discourage inhalant abuse, although this can cause problems for legitimate users. The bitterant not only leaves a bitter flavor in the air, but also leaves a bitter residue on objects, like screens and keyboards, that may transfer to hands and cause problems.
Denatonium is used in a variety of applications as an aversive agent.
Sucrose octaacetate
Quercetin
Brucine
Quassin
Bitterness scales
The threshold for stimulation of bitter taste by quinine averages a concentration of 8 μM. The taste thresholds of other bitter substances are rated relative to quinine, which is thus given a reference index of 1. For example, Brucine has an index of 11, is thus perceived as intensely more bitter than quinine, and is detected at a much lower solution threshold. The most bitter substance known is the synthetic chemical denatonium, which has an index of 1,000. It is used as an aversive agent that is added to toxic substances to prevent accidental ingestion. This was discovered in 1958 during research on lignocaine, a local anesthetic, by MacFarlan Smith of Gorgie, Edinburgh, Scotland.
Brewery
Beer bitterness scales attempt to rate the perceived relative bitterness of beer. The bitterness of beer is provided by compounds such as isohumulones from hops used during brewing. The International Bittering Units scale, or simply IBU scale, is measured through the use of a spectrophotometer and solvent extraction a calculation is performed on this absorbance to give a result in IBU. This technique was adopted at the same time as another method based on measuring the concentration of IAA isomerized α acids in a beer, causing some confusion among small-scale brewers. The American Society of Brewing Chemists, in the introduction to its methods on measuring bitterness, points out some differences between the results of the two methods: The European Bitterness Units scale, often abbreviated as EBU, is a bitterness scale in which lower values are generally "less bitter" and higher values "more bitter". The scale and method are defined by the European Brewery Convention, and the numerical value should be the same as of the International Bitterness Units scale, defined in co-operation with the American Society of Brewing Chemists. However, the exact process of determining EBU and IBU values differs slightly, which may in theory result with slightly smaller values for EBU than IBU. IBU can not be determined by perceived bitterness. For example, the bittering effect of hops is less noticeable in beers with a high quantity of malt, so a higher bitterness is needed in heavier beers to balance the flavour and achieve the same perceived bitterness as compared to a lighter beer. For example, an Imperial Stout may have an IBU of 50, but will taste less bitter than an English Bitter with an IBU of 30, because the latter beer uses much less malt than the former. After around 100 IBU, hop utilization is so poor that the number ceases to be meaningful in regard to taste, although continued hop additions will increase bitterness. Light lagers without much bitterness will generally have 8-20 IBU, while an India Pale Ale may have 60-100 IBU or more.
