Bondo (putty)


Bondo putty is an automotive body filler and a brand name used by 3M for a line of American-made products for automotive, marine and household repairs. The term Bondo is trademarked by 3M, but is commonly used to refer to any brand of automotive repair putty due to its popularity. It is also used by sculptors.

History

Before the 1940s, body solder was often used to repair large imperfections prior to painting. In both new cars and vehicle repair shops. Solder repairs were conducted using a flame and wooden paddles covered in tallow or motor oil, which prevented the half-molten lead from sticking. After the war, automotive panels became thinner and larger, with a greater susceptibility to warping, making hot solder unsuitable. The earliest 'plastic solder' can be traced to around 1940, a do-it-yourself solution to panel beating.
This gave the consumer the ability to attempt reasonably priced and long lasting repairs. These early fillers were epoxy-based and one part, drying by out gassing. Originally the plastic fillers performed badly compared to solder, but later improvements addressed this.
Bondo, a two-part mix of talc and plastic, was introduced in 1955. It was developed by World War II veteran and automotive repair shop owner Robert Merton Spink of Miami, Florida.