Brecknell Willis high speed pantograph


The Brecknell Willis High Speed Pantograph is one of the four standard pantographs in use on British railway locomotives and multiple units. It was designed during the late 1970s / early 1980s by Brecknell Willis and British Rail Research Division as part of ongoing research into developing a pantograph capable of speeds over the 100 mph limit of the Stone Faiveley AMBR pantograph, which was the standard type fitted at the time.
The research was mainly carried out at the Old Dalby Test Track in Leicestershire and then on the West Coast Main Line. The WCML tests, between London and Preston, were initially done with the pantograph attached to the top of Lab Coach 6 'Prometheus' during December 1978. After some initial problems with these tests, the pantograph was modified at Derby / Old Dalby but returned to WCML testing in July 1979 between London and Carlisle. After this testing, Lab Coach 6 was moved to the East Coast Main Line for maximum wire height testing.
The first locomotives to be fitted with the pantograph were Class 86 nos. 86244 and 86103, during February 1980 - both had a clearly visible observation box on their roofs to monitor performance. A third locomotive, Class 87 no. 87005, was fitted during late 1981.
Testing was also carried out on the APT-P during the development of the pantograph as this enabled high speed testing to be conducted at up to 150 mph.

Today

The pantograph is the mainstay within the UK railway system, where is used on most overhead electric locomotives and EMUs. It has also been exported across the world, being used on the US high speed train Acela and the Eurostar Class 373.