Bristol Biplane Type 'T'


The Bristol Biplane Type 'T', sometimes called the Challenger-Dickson Biplane, was a derivative of the Bristol Boxkite. It was built in 1911 by the British and Colonial Aeroplane Company and was designed as a cross-country racing aircraft for Maurice Tabuteau.

Development

The Type 'T' was not a development of the Bristol Boxkite but did use some of the experience gained with the Boxkite. It was designed by George Challenger, with the assistance of practical advice from Captain Bertram Dickson, a prominent pilot of the day. It had the same "Farman" configuration as the Boxkite, differing principally in having an enclosed nacelle to house the pilot. The structure bearing the front elevator also differed substantially: the elevator was mounted lower down, level with the lower wing, and the undercarriage skids were continued forward and upwards to form part of the elevator mounting. The rear-mounted twin rudders were balanced, unlike those of the Boxkite.
The first aircraft was built to compete in the 1911 Circuit de l'Europe race, with Maurice Tabuteau as pilot, and was powered by a Gnome Gamma rotary engine. Tabateau put up a creditable performance, and completed all of the race's nine stages.
Four more aircraft were built for 1911 Daily Mail Circuit of Britain Air Race. These differed from the design of No. 45 in having a modified nacelle and rudders placed further out, away from the slipstream of the engine.
Maurice Tabuteau also entered the race in the original Type T No. 45 but none of Type Ts finished the race. After the crash of No. 51 none of the Type Ts were flown again. An additional machine, No. 59, was modified by Gordon England as the Challenger-England biplane. One more aircraft, No. 78, was to be fitted with a 100 hp Gnome engine but was never completed.

The Challenger-England biplane

Under the direction of Gordon England one aircraft was later converted to a tractor configuration, powered by a E.N.V. Type F water-cooled V-8 engine.

Specifications (Type 'T')