Bunny boots


Bunny boots or Mickey Mouse boots are the most common nicknames for the Extreme Cold Vapor Barrier Boots used by the United States Armed Forces. These large, bulbous, waterproof rubber boots are worn only in extremely cold weather,, with the liner-free interior retaining warmth by sandwiching up to one inch of wool and felt insulation between two vacuum-tight layers of rubber; this vacuum layer insulates the wearer's feet similar to a vacuum flask. These boots were originally developed at the Navy Clothing and Textile Research Center in Natick, Massachusetts, for use during the Korean War.
.
Originally designed during the Korean War for military expeditions in extremely cold weather, the ECVB Boots are rated to either -20°F to -60°F and have been sold to civilians in large amounts as military surplus.
Owing to their warmth and low price, these boots have become staple extreme cold weather gear both in civilian work and recreational environments. Bunny boots are common in arctic climates such as Alaska.

Description

Type I

The black pairs, called Mickey Mouse boots, weigh 44 oz. apiece, are rated for temperatures down to −20 °F and are made with oil/diesel resistant rubber. They are less common and predate the post-Korea white pairs which are still issued today.

Type II

The white "Bunny boot" is an improved version of the Type I "Mickey Mouse boot", designed for use in even more extreme cold weather, and is rated all the way down to. Given the sufferings of the soldiers fighting in the Battle of Chosin Reservoir in Korea, inducing many cases of frostbite, even with Type I boots, the Type II was created to encompass the "worst case scenario" need to field soldiers in the coldest conditions in which any military force could reasonably attempt to conduct operations. For comparison, the average winter temperature at the South Pole in Antarctica is roughly. The boot is slightly bigger and heavier than the black Type I because of the extra insulation.
Both Mickey Mouse boots and bunny boots have an air valve on each of the boots. These air valves must be opened prior to flying to ensure that the air pressure differential between the walls of the boot and the outside air does not cause the boots to rupture.
The extreme cold weather boot is nicknamed after the snowshoe hare, which is commonly found near Fort Greely, Alaska. During the fall the rabbits' fur changes color from brown to white, allowing it to blend in with its winter surroundings. As winter gets closer, more and more rabbits appear with their new white "boots". These boots are manufactured by several companies including Bata, Acton and Air Boss.
Both Mickey Mouse boots and bunny boots have rubber wedges on the front of the toe and the back of the heel. These wedges lock into military-standard ski and snowshoe bindings.