Caledonian Railway 721 Class


The Caledonian Railway 721 Class was a class of 4-4-0 steam locomotives designed by John F. McIntosh for the Caledonian Railway and introduced in 1896. All survived to be absorbed by the London, Midland and Scottish Railway in 1923 and a few survived into British Railways ownership in 1948.

Development

The "Dunalastair" class marked a new era of development in late-Victorian British steam locomotive design. The average weight of passenger trains had greatly increased in the 1880s and 1890s due to the demand for more comfortable, better-appointed and safer carriages. Combined with continually rising passenger volumes and the competition between railway companies to offer faster services and locomotive engineers were faced with producing engines that could operate longer, heavier trains at faster speeds. The existing pattern of inside-cylinder 4-4-0 express engine was reaching the limits of its development and many railways were resorting to the inefficient practise of double heading to maintain schedules.
McIntosh provided the solution with the original "Dunalastair" of 1896. In broad design this was identical to the conventional 4-4-0 engine drawn up by his predecessor Dugald Drummond but it carried a boiler significantly larger than was usual for the time - almost to the full limits that the Caledonian's loading gauge would allow, operating at a relatively high pressure of 160psi. The boiler also contained more fire tubes of a greater diameter than its predecessors, greatly increasing its steam generating capacity and overall steam volume. While the top speed of the 721 Class and its developments was largely the same as other express 4-4-0s the more productive and capacious boiler meant the type offered a hugely improved ability to maintain high speeds with heavy loads on steep gradients, allowing the "Dunalastairs" to set high average speeds over the Caledonian's arduous main line over Beattock Summit. So confident was McIntosh that his new engine would do away with the need for double heading that the "Dunalastairs" were originally built without brake hoses on their front buffer beam, meaning that a second engine could not be coupled to them.
The principles of the 721 Class and its boiler were adopted by many other locomotive engineers and railways in the 1890s and early 20th century, leading to the so-called 'big engine' period of design. Other engine classes such as the GNR Class C1 and the GWR 4100 Class were inspired by the success of the "Dunalastairs".
The class was very successful and developed in four different versions:
The rebuilding with superheaters was accompanied by a reduction in boiler pressure and an increase in cylinder diameter.
There are two further classes of McIntosh 4-4-0 locomotives which some authors have included in the Dunalastair series. These are:
During the national coal strike of 1912, some Caledonian locomotives, including Dunalastairs or 139 class engines, and two engines from class 812 were fitted with Holden oil burners for a short time. They received a fuel tank atop the tender and more refractory bricks in the firebox.

Tenders

Classes 766 and 900 were built with eight-wheel bogie tenders with capacities for of water and 4.5 tons of coal. In the 1930s newer and more powerful LMS locomotives took over their most long-distance duties and the company cascaded the 900 Class to other work. This made eight-wheel tenders superfluous so the company substituted smaller, lighter and simpler six-wheel tenders from scrapped Caledonian locomotives. Most members of the class received McIntosh tenders that had been built for classes 179, 600, 908 and 918. The six-wheel tenders had the same 4.5 ton coal capacity but carried only of water.

Accidents and incidents

;Table 1
ClassWeightBoiler
pressure
CylindersDriving
wheels
Tractive
effort
LMS
power
class
Dunalastair I47 tons160 psi18.25" × 26"6' 6"15,100 lbf2P
Dunalastair II49 tons175 psi19" × 26"6' 6"17,900 lbf2P
Dunalastair III51.7 tons180 psi19" × 26"6' 6"18,411 lbf2P
Dunalastair IV56.5 tons180 psi19" × 26"6' 6"18,411 lbf2P
Rebuilt II52 tons170 psi19.5" × 26"6' 6"18,315 lbf3P
Rebuilt III54.5 tons170 psi19.5" × 26"6' 6"18,315 lbf3P
Rebuilt IV56.5 tons170 psi20.25" × 26"6' 6"19,751 lbf3P
139 and 4359 tons170 psi20.25" × 26"6' 6"19,751 lbf3P

Numbering

;Table 2
ClassCR no.LMS no.BR no.
Withdrawal
dates
Dunalastair I721–73514311–143251930–35
Dunalastair II766–78014326–143361936–47
Dunalastair III900–902, 887–89914337–143481932–47
Dunalastair IV140–150, 923–927, 137, 138, 13614349–14365543631937–48
Rebuilt IIvarious14430–144331935–37
Rebuilt IIIvarious14434–14437544341928–48
Rebuilt IVvarious14438–1443954438–544391955–58
139 Class139, 132–135, 117–12214440–1444954440–544491915–57
43 Class43–48, 39–42, 12314450–1446054450–544601954–57

The 139 Class and 43 Class are included in the Dunalastair series by some authors. Some locomotives survived into British Railways ownership in 1948.

Belgian derivatives

derived six series of steam locomotives from the Dunalastair design between 1899 and 1913:
Two of them are preserved in cosmetic state by SNCB: 4-4-2 tank locomotive 16.042 and express locomotive 18.051.
18.051 also features an eight-wheel tender similar to the Caledonian eight-wheel tender. This kind of tender was used on Type 17 and some of the first Type 18 while the rest had wider and larger six-wheel Belgian tenders. That one was salvaged when 18.051 was restored and was originally built for an older Type 18.

Withdrawal

The first Dunalastair to be withdrawn from service, other than for accident damage, was 14343 in 1933. The reason for its withdrawal is unclear. The next withdrawal was not until 1937. By 1944 only five members of the 900 Class remained. The last 900 Class survivor received the British Railways number 54434 and was based at until it was withdrawn in 1948. None of them survived into preservation.