Calling convention


In computer science, a calling convention is an implementation-level scheme for how subroutines receive parameters from their caller and how they return a result. Differences in various implementations include where parameters, return values, return addresses and scope links are placed, and how the tasks of preparing for a function call and restoring the environment afterward are divided between the caller and the callee.
Calling conventions may be related to a particular programming language's evaluation strategy but most often are not considered part of it, as the evaluation strategy is usually defined on a higher abstraction level and seen as a part of the language rather than as a low-level implementation detail of a particular language's compiler.

Variations

Calling conventions may differ in:
In some cases, differences also include the following:
Although some languages actually may specify this partially in the programming language specification, different implementations of such languages may typically still use various calling conventions, often selectable. Reasons for this are performance, frequent adaptation to the conventions of other popular languages, and restrictions or conventions imposed by various "platforms".

Architecture variation

CPU architectures always have more than one possible calling convention. With many general-purpose registers and other features, the potential number of calling conventions is large, although some architectures are formally specified to use only one calling convention, supplied by the architect.

x86 (32-bit)

The x86 architecture is used with many different calling conventions. Due to the small number of architectural registers, the x86 calling conventions mostly pass arguments on the stack, while the return value is passed in a register. Some conventions use registers for the first few parameters, which may improve performance for short and simple leaf-routines very frequently invoked.
Example call:

push EAX ; pass some register result
push byte ; pass some memory variable
push 3 ; pass some constant
call calc ; the returned result is now in EAX

Typical callee structure:

calc:
push EBP ; save old frame pointer
mov EBP,ESP ; get new frame pointer
sub ESP,localsize ; reserve stack space for locals
.
. ; perform calculations, leave result in EAX
.
mov ESP,EBP ; free space for locals
pop EBP ; restore old frame pointer
ret paramsize ; free parameter space and return

ARM (A32)

The standard 32-bit ARM calling convention allocates the 15 general-purpose registers as:
The 16th register, r15, is the program counter.
If the type of value returned is too large to fit in r0 to r3, or whose size cannot be determined statically at compile time, then the caller must allocate space for that value at run time, and pass a pointer to that space in r0.
Subroutines must preserve the contents of r4 to r11 and the stack pointer. In particular, subroutines that call other subroutines must save the return address in the link register r14 to the stack before calling those other subroutines. However, such subroutines do not need to return that value to r14—they merely need to load that value into r15, the program counter, to return.
The ARM calling convention mandates using a full-descending stack.
This calling convention causes a "typical" ARM subroutine to:
The 64-bit ARM calling convention allocates the 31 general-purpose registers as:
The 32nd register, which serves as a stack pointer or as a zero register depending on the context, is referenced as sp.
All registers starting with x have a corresponding 32-bit register prefixed with w. Thus, a 32-bit x0 is called w0.

PowerPC

The PowerPC architecture has a large number of registers so most functions can pass all arguments in registers for single level calls. Additional arguments are passed on the stack, and space for register-based arguments is also always allocated on the stack as a convenience to the called function in case multi-level calls are used and the registers must be saved. This is also of use in variadic functions, such as printf, where the function's arguments need to be accessed as an array. A single calling convention is used for all procedural languages.

MIPS

The most commonly used calling convention for 32 bit MIPS is the O32 ABI which passes the first four arguments to a function in the registers $a0-$a3; subsequent arguments are passed on the stack. Space on the stack is reserved for $a0-$a3 in case the callee needs to save its arguments, but the registers are not stored there by the caller. The return value is stored in register $v0; a second return value may be stored in $v1. The 64 bit N64 ABI allows for more arguments in registers for more efficient function calls when there are more than four parameters. There is also the N32 ABI which also allows for more arguments in registers. The return address when a function is called is stored in the $ra register automatically by use of the JAL or JALR instructions.
The function prologue of a MIPS subroutine pushes the return address to the stack.
The N32 and N64 ABIs pass the first eight arguments to a function in the registers $a0-$a7; subsequent arguments are passed on the stack. The return value is stored in the registers $v0; a second return value may be stored in $v1. In both the N32 and N64 ABIs all registers are considered to be 64-bits wide.
On both O32 and N32/N64 the stack grows downwards, but the N32/N64 ABIs require 64-bit alignment for all stack entries. The frame pointer is optional and in practice rarely used except when the stack allocation in a function is determined at runtime, for example, by calling alloca.
For N32 and N64, the return address is typically stored 8 bytes before the stack pointer although this may be optional.
For the N32 and N64 ABIs, a function must preserve the $S0-$s7 registers, the global pointer, the stack pointer and the frame pointer. The O32 ABI is the same except the calling function is required to save the $gp register instead of the called function.
For multi-threaded code, the thread local storage pointer is typically stored in special hardware register $29 and is accessed by using the mfhw instruction. At least one vendor is known to store this information in the $k0 register which is normally reserved for kernel use, but this is not standard.
The $k0 and $k1 registers are reserved for kernel use and should not be used by applications since these registers can be changed at any time by the kernel due to interrupts, context switches or other events.
NameNumberUseCallee must preserve?
$zero$0constant 0
$at$1assembler temporary
$v0-$v1$2-$3values for function returns and expression evaluation
$a0-$a3$4-$7function arguments
$t0-$t7$8-$15temporaries
$s0-$s7$16-$23saved temporaries
$t8-$t9$24-$25temporaries
$k0-$k1$26-$27reserved for OS kernel
$gp$28global pointer
$sp$29stack pointer
$fp$30frame pointer
$ra$31return address

NameNumberUseCallee must preserve?
$zero$0constant 0
$at$1assembler temporary
$v0-$v1$2-$3values for function returns and expression evaluation
$a0-$a7$4-$11function arguments
$t4-$t7$12-$15temporaries
$s0-$s7$16-$23saved temporaries
$t8-$t9$24-$25temporaries
$k0-$k1$26-$27reserved for OS kernel
$gp$28global pointer
$sp$29stack pointer
$s8$30frame pointer
$ra$31return address

Registers that are preserved across a call are registers that will not be changed by a system call or procedure call. For example, $s-registers must be saved to the stack by a procedure that needs to use them, and $sp and $fp are always incremented by constants, and decremented back after the procedure is done with them. By contrast, $ra is changed automatically by any normal function call, and $t-registers must be saved by the program before any procedure call.
The userspace calling convention of position-independent code on Linux additionally requires that when a function is called the $t9 register must contain the address of that function. This convention dates back to the System V ABI supplement for MIPS.

SPARC

The SPARC architecture, unlike most RISC architectures, is built on register windows. There are 24 accessible registers in each register window: 8 are the "in" registers, 8 are the "local" registers, and 8 are the "out" registers. The "in" registers are used to pass arguments to the function being called, and any additional arguments need to be pushed onto the stack. However, space is always allocated by the called function to handle a potential register window overflow, local variables, and returning a struct by value. To call a function, one places the arguments for the function to be called in the "out" registers; when the function is called, the "out" registers become the "in" registers and the called function accesses the arguments in its "in" registers. When the called function completes, it places the return value in the first "in" register, which becomes the first "out" register when the called function returns.
The System V ABI, which most modern Unix-like systems follow, passes the first six arguments in "in" registers %i0 through %i5, reserving %i6 for the frame pointer and %i7 for the return address.

IBM System/360 and successors

The IBM System/360 is another architecture without a hardware stack. The examples below illustrate the calling convention used by OS/360 and successors prior to the introduction of 64-bit z/Architecture; other operating systems for System/360 might have different calling conventions.
Calling program:
LA 1,ARGS Load argument list address
L 15,=A Load subroutine address
BALR 14,15 Branch to called routine1
...
ARGS DC A Address of 1st argument
DC A
...
DC A+X'80000000' Last argument2
Called program:
SUB EQU * This is the entry point of the subprogram
Standard entry sequence:
USING *,153
STM 14,12,12 Save registers4
ST 13,SAVE+4 Save caller's savearea addr
LA 12,SAVE Chain saveareas
ST 12,8
LR 13,12
...
Standard return sequence:
L 13,SAVE+45
LM 14,12,12
L 15,RETVAL6
BR 14 Return to caller
SAVE DS 18F Savearea7
Notes:
  1. The BALR instruction stores the address of the next instruction in the register specified by the first argument—register 14—and branches to the second argument address in register 15.
  2. The caller passes the address of a list of argument addresses in register 1. The last address has the high-order bit set to indicate the end of the list. This limits programs using this convention to 31-bit addressing.
  3. The address of the called routine is in register 15. Normally this is loaded into another register and register 15 is not used as a base register.
  4. The STM instruction saves registers 14, 15, and 0 thru 12 in a 72-byte area provided by the caller called a save area pointed to by register 13. The called routine provides its own save area for use by subroutines it calls; the address of this area is normally kept in register 13 throughout the routine. The instructions following STM update forward and backward chains linking this save area to the caller's save area.
  5. The return sequence restores the caller's registers.
  6. Register 15 is usually used to pass a return value.
  7. Declaring a savearea statically in the called routine makes it non-reentrant and non-recursive; a reentrant program uses a dynamic savearea, acquired either from the operating system and freed upon returning, or in storage passed by the calling program.
In the System/390 ABI and the z/Architecture ABI, used in Linux:
Register
R0Return values. Temporary for expanding assembly pseudo-instructions. Implicit source/destination for 8/16-bit operations. Not preserved.Return value, caller savesVariables/temporary. Not guaranteed
R1..R3Serves as temporary registers. Not preserved.Caller saved scratch. Structure address Variables/temporary. Not guaranteed
R4..R7First four words of integer arguments. The argument build area provides space into which R4 through R7 holding arguments may spill. Not preserved.Parameter passing, caller savesArguments. Not guaranteed.
R8..R13Serves as permanent registers. Preserved.Callee SavesVariables/temporary. Guaranteed.
R14Default frame pointer. Preserved.Frame Pointer, FP, callee savesVariables/temporary. Guaranteed.
R15Serves as stack pointer or as a permanent register. Preserved.Stack Pointer, SP, callee savesStack pointer. Guaranteed.

68k

The most common calling convention for the Motorola 68000 series is:
The IBM 1130 was a small 16-bit word-addressable machine. It had only six registers plus condition indicators, and no stack. The registers are Instruction Address Register , Accumulator , Accumulator Extension , and three index registers X1-X3. The calling program is responsible for saving ACC, EXT, X1, and X2. There are two pseudo-operations for calling subroutines, CALL to code non-relocatable subroutines directly linked with the main program, and LIBF to call relocatable library subroutines through a transfer vector. Both pseudo-ops resolve to a Branch and Store IAR machine instruction that stores the address of the next instruction at its effective address and branches to EA+1.
Arguments follow the BSIusually these are one-word addresses of argumentsthe called routine must know how many arguments to expect so that it can skip over them on return. Alternatively, arguments can be passed in registers. Function routines returned the result in ACC for real arguments, or in a memory location referred to as the Real Number Pseudo-Accumulator. Arguments and the return address were addressed using an offset to the IAR value stored in the first location of the subroutine.

* 1130 subroutine example
ENT SUB Declare "SUB" an external entry point
SUB DC 0 Reserved word at entry point, conventionally coded "DC *-*"
* Subroutine code begins here
* If there were arguments the addresses can be loaded indirectly from the return addess
LDX I 1 SUB Load X1 with the address of the first argument
...
* Return sequence
LD RES Load integer result into ACC
* If no arguments were provided, indirect branch to the stored return address
B I SUB If no arguments were provided
END SUB

Subroutines in IBM 1130, CDC 6600 and PDP-8 store the return address in the first location of a subroutine.

Implementation considerations

This variability must be considered when combining modules written in multiple languages, or when calling operating system or library APIs from a language other than the one in which they are written; in these cases, special care must be taken to coordinate the calling conventions used by caller and callee. Even a program using a single programming language may use multiple calling conventions, either chosen by the compiler, for code optimization, or specified by the programmer.

Threaded code

Threaded code places all the responsibility for setting up for and cleaning up after a function call on the called code. The calling code does nothing but list the subroutines to be called. This puts all the function setup and cleanup code in one place—the prolog and epilog of the function—rather than in the many places that function is called. This makes threaded code the most compact calling convention.
Threaded code passes all arguments on the stack. All return values are returned on the stack. This makes naive implementations slower than calling conventions that keep more values in registers. However, threaded code implementations that cache several of the top stack values in registers—in particular, the return address—are usually faster than subroutine calling conventions that always push and pop the return address to the stack.

PL/I

The default calling convention for programs written in the PL/I language passes all arguments by reference, although other conventions may optionally be specified. The arguments are handled differently for different compilers and platforms, but typically the argument addresses are passed via an argument list in memory. A final, hidden, address may be passed pointing to an area to contain the return value. Because of the wide variety of data types supported by PL/I a data descriptor may also be passed to define, for example, the lengths of character or bit strings, the dimension and bounds of arrays, or the layout and contents of a data structure. Dummy arguments are created for arguments which are constants or which do not agree with the type of argument the called procedure expects.