Canarsie–Rockaway Parkway opened on July 28, 1906, as the terminal of a service that ran on the Canarsie and Jamaica lines to Broadway Ferry station in Williamsburg. Because it is at street level, the station is accessible as part of the Americans with Disabilities Act of 1990. However, the station was still missing some key ADA elements; subsequently, as part of the 2015–2019 MTA Capital Program, the station was to be upgraded with several ADA improvements. For $5.48 million, the station agent booths were relocated, platforms had boarding areas extended and retrofitted with warning strips and rubbing boards, the platform gaps were reduced, and a new ADA compliant ramp wase installed, along with other modifications. A $21.2 million contract for ADA upgrades and a renovation of the adjacent bus terminal was awarded in late 2018. The project was completed by July 2020.
Station layout
This grade level station has two tracks and a single island platform. The two tracks end at offset bumper blocks at the south end of the station; track 2, the northbound track, is slightly shorter than track 1 because of the diagonal alignment of the station to the street grid. The station is fully ADA-accessible. Adjacent to the station to the east is the Canarsie Yard.
Exits
The station's entrance is beyond the bumper blocks at the south end of the platform. It contains a turnstile bank, token booth, and leads to Rockaway Parkway. On the side of the station house opposite the transfer point is a secondary entrance/exit that contains one HEET entry/exit turnstile, one exit-only HEET turnstile, and one emergency gate. This unstaffed entrance/exit leads to a NYCDOT municipal parking lot, located on the north side of the station. This lot was opened by the New York City Transit Authority in 1959, with space for 340 cars. Another set of HEET turnstiles between the north end of the bus loop and Canarsie Yard connected to the platform by a passageway leads to East 98th Street near Glenwood Road.
Bus transfer
This station is the only one in the system with a bus transfer station within fare control. When the rail service to Canarsie Pier along Rockaway Parkway was discontinued, riders were entitled to a free transfer to the replacement trolleys. Rather than issue paper transfers so riders could exit to the street for the trolleys, a loop was built next to the station with a boarding platform. When the trolleys were discontinued in April 1949, the B42 bus replaced them. South of here, poles that supported the overhead trolley wire remain, with street lighting using some of them. Train riders walk directly to the bus loading area without leaving the fare control zone. In turn, bus passengers from Rockaway Parkway enter the subway station without paying an additional fare. At the street, a chain link fence gate blocks access to the bus area to prevent pedestrians from sneaking in for a free ride. The gate is operated by an electric trigger, and was put into operation on December 7, 1960. The back of the bus loop contains an unstaffed entrance to the Rockaway Parkway station that is built on a small shack, has one HEET turnstile, one exit-only turnstile, and one emergency gate, and leads to the northeast corner of Glenwood Road and East 98th Street. Prior to December 2019, other buses serving the station stopped at the curb and picked up passengers outside fare control on the East 98th Street loop outside the inner loop. A chain link fence had separated the loops. In 2019, the loop was reconfigured, and reopened with 3 bays and one loop:
Bay 1: all B42 service
Bay 2: westbound B82 Local and Select Bus service
Bay 3: westbound B6 Local and Limited service
The B17 and B60, along with eastbound buses on the B6 and B82 Local and Select Bus Service routes, continue to stop outside fare control. This reconstruction was done for approximately $2.4 million.
