Canon AE-1


The Canon AE-1 is a 35 mm single-lens reflex film camera for use with interchangeable lenses. It was manufactured by Canon Camera K. K. in Japan from April 1976 to 1984. It uses an electronically controlled, electromagnet horizontal cloth focal plane shutter, with a speed range of 2 to 1/1000 second plus Bulb and flash X-sync of 1/60 second. The camera body is 87 mm tall, 141 mm wide, and 48 mm deep; it weighs 590 g. Most are black with chrome trim, but some are all black.
The AE-1 is a historically significant SLR, both because it was the first microprocessor-equipped SLR and because of its sales: backed by a major advertising campaign, the AE-1 sold over one million units, which made it an unprecedented success in the SLR market.

Features

The AE-1 has a Canon FD breech-lock lens mount and accepts any FD or New FD lens. It is not compatible with Canon's later Canon EF lens mount, though adapters made by independent manufacturers can be found. The camera will also accept Canon's earlier FL-mount lenses through the use of stop-down metering. Original FD lenses, introduced in 1971, do not rotate in the mounting process; instead, a locking ring at the base is turned to attach the lens. This was often criticized as being slower than the bayonet mounts of competing cameras. The counter argument, though, was that as the lens/body mating surfaces did not rotate, there was no wear that could affect the critical distance from lens to film plane. In 1979, Canon introduced the New FD series of lenses that rotate the whole outer lens barrel to lock. The inner lens barrel remains stationary, and thus the signal levers and pins still do not rotate. During the late 1970s, there were over 50 Canon FD lenses available for purchase. They ranged from a Fisheye FD 15 mm f/2.8 SSC to a FD 800 mm f/5.6 SSC, plus special purpose lenses such as a 7.5mm circular fisheye and a 35 mm tilt and shift lens.
Accessories for the AE-1 include the Canon Winder A, the Canon Databack A, and the Canon Speedlite 155A and Canon Speedlite 177A electronic flashes. The later Power winder A2 is also compatible, but the Motor Drive MA is not.
The AE-1 is a battery-powered microprocessor-controlled manual focus SLR. It supports either manual exposure control or shutter priority auto exposure. The exposure control system consists of a needle pointing along a vertical f-stop scale on the right side of the viewfinder to indicate the readings of the built-in light meter. The viewfinder used by the AE-1 is Canon's standard split image rangefinder with microprism collar focusing aids.

Design history

The AE-1 was the first in what became a complete overhaul of Canon's line of SLRs. The 1970s and 1980s were an era of intense competition between the major Japanese SLR brands: Canon, Nikon, Minolta, Pentax and Olympus. Between 1975 and 1985, there was a dramatic departure from heavy all-metal manual mechanical camera bodies to much more compact bodies with integrated circuit electronic automation. In addition, due to rapid advances in electronics, the brands leap-frogged each other with successively more automated models.
Although Canon Camera K. K. had been making quality 35 mm cameras for decades, it had since the late 1950s been overshadowed by their rival Nippon Kokagu K. K. and their Nikon cameras. While Canons easily led in the amateur compact fixed-lens market, Canon SLRs didn't have the professional features of the top-end Nikon SLRs. Nikon, with its solid reputation for quality of material and workmanship, held a stranglehold on the prestigious professional SLR market that competitors could not break.
The AE-1 was the vanguard of the landmark Canon amateur level A-series SLRs and led Canon's charge into the emerging electronically controlled SLR market. The other members of the A-series were the AT-1, A-1, AV-1, AE-1 Program and AL-1. They all used the same compact aluminum alloy chassis, but with different feature levels and outer cosmetic plastic top panel. By sharing most major components, including an inexpensive horizontal cloth-curtain shutter, viewfinder information display, and autoflash control, Canon further reduced costs and could undercut the price of the more expensive SLRs then on the market.
In keeping with its cost-cutting philosophy, Canon designed the AE-1 to use a significant amount of structural plastic for a lighter and cheaper camera at the expense of being less impact resistant. Canon went to great effort to disguise the use of plastic - the injection-molded acrylonitrile-butadiene-styrene for the top panel finished with either satin chrome to give the look and feel of metal. The bottom plate were made of brass and then finished with satin chrome. Extensive use of electronics also allowed simpler modular internal construction instead of mechanical linkages. Five major and 25 minor internal modules reduced the individual parts count by over 300. Modular construction, in turn, allowed automated production lines in order to reduce cost. Unfortunately, cost concerns also resulted in the use of plastic in some of the moving/operating mechanisms.
The AE-1 was never designed to be a professional camera. However, it was made to have relatively straightforward controls and automatic aperture for newcomers, with various manual controls and system accessories to appeal to more experienced photographers. The AE-1 was the first SLR purchased by millions of amateur photographers, persuaded by its feature list and low price.
In many ways, the AE-1 represented the confluence of two streams of Canon camera development. The first generation electronically controlled 35 mm SLR Canon EF merged with the final generation rangefinder Canonet G-III QL17. After decades of chasing Nikon for Japanese optical supremacy, Canon finally hit upon a formula for success: high technology for ease of use, cheaper internal parts and electronics for lower price, and heavy advertising to get the message out. Despite outcries from traditionalist photographers who complained about an “excess” of automation ruining the art of photography, automation proved to be the only way to entice the amateur photographer.
The AE-1 had only one pointer needle used to indicate the light meter recommended f-stop, and neither a follower needle to indicate the actual lens set f-stop, nor plus/minus indicators for over/underexposure. The shutter-priority system of the AE-1 was more suited to sports action than to preserving depth-of-field, yet the 1/1000 s top speed of its horizontally traveling shutter limited its use for such activities. The battery door design was subject to frequent breakage, and over time owners have reported instances of shutter and mechanical gremlins, including mirror linkage wear. Canon's eventual abandonment of the FD lens mount for the EOS autofocus design also had an effect on prices for the AE-1 on the used market.

Legacy

Apple sound designer Jim Reekes recorded the screen snapshot sound used on Macintosh computers and iPhones from the AE-1 he used as a high school student.