Carl Gustaf recoilless rifle


The Carl Gustaf recoilless rifle is an 84-mm man-portable reusable anti-tank weapon produced by Saab Bofors Dynamics in Sweden. Introduced in 1946, it was one of the many recoilless rifle designs of that era. While similar weapons have generally disappeared from service, the Carl Gustaf is still being made and remains in widespread use today. The Carl Gustaf is a lightweight, low-cost weapon that uses a wide range of ammunition, which makes it extremely flexible and suitable for a wide variety of roles.
The weapon's name is frequently shortened. In Sweden, it is officially called the Grg m/48. British troops refer to it as the "Charlie G", while Canadian troops often refer to it as "Carl G". In U.S. military service, it is officially known as the "M3 Multi-Role Anti-Armor Anti-Personnel Weapon System" or "Ranger Anti-tank Weapons System", but is often just called "Gustaf". In Australia, it is irreverently known as "Charlie Gutsache", or "Charlie Swede".
In Estonia it is often called "Gusti" by its users.

History

The Carl Gustaf M1 was developed by Hugo Abramson and Harald Jentzen at the Kungliga Arméförvaltningens Tygavdelning and produced at Carl Gustaf Stads Gevärsfaktori from where it derives its name. The weapon was first introduced into Swedish service in 1948 as the 8,4 cm Granatgevär m/48, filling the same anti-tank role as the U.S. Army's bazooka, British PIAT and German Panzerschreck. Unlike these weapons, however, the Gustaf used a rifled barrel for spin-stabilizing its rounds, as opposed to fins used by the other systems.
The use of the recoilless firing system allowed the Gustaf to use ammunition containing considerably more propellant, firing its rounds at, as opposed to about for the Panzerschreck and Bazooka and about for the PIAT. The result was superior accuracy at longer ranges. The Gustaf can be used to attack larger stationary targets at up to, but the relatively low speed of the projectile restricts attacks on moving targets to a range of or less.
The Gustaf was soon sold around the world and became one of the primary squad-level anti-tank weapons for many West European armies. An improved, lighter and slightly shorter version, the Carl Gustaf M2, was introduced in 1964 and quickly replaced the original version. The current Carl Gustaf M3 version was introduced in 1991. It reduced the weight even further by replacing the forged steel tube with a thin steel liner containing the rifling, strengthened by a carbon fiber outer sleeve. The external steel parts were also replaced with plastics and aluminium alloys.
In recent years, the M3 has found new life in a variety of roles. The British Special [Air Service, United States Army Special Forces and United States Army Rangers use M3s in bunker-busting and anti-vehicle roles, while the German Bundeswehr maintains a small number of M2s for battlefield illumination. Many armies continue to use it as a viable anti-armor weapon, especially against 1950s- and 1960s-era tanks and other armored vehicles still in use worldwide.
In November 2011, the U.S. Army began ordering the M3 MAAWS for regular units deployed in Afghanistan. Soldiers were being engaged with RPGs at 900 meters, while their light weapons had effective ranges of 500–600 meters. The Gustaf allows airburst capability of troops in defilade out to 1,250 meters, and high explosive use out to 1,300 meters. While the weapon provides enhanced effectiveness, its weight burdens troops. On 28 March 2013, USSOCOM announced a call for sources to develop a kit to lighten the M3 MAAWS and reduce overall length without affecting handling or ruggedness. By that time, Saab was developing a weight-reduced version prior to the SOCOM release that demonstrated no decrease in performance, no increase in recoil, and nearly equivalent barrel life that could be ready for government testing in 2014. Saab has also developed a new high explosive round that has a direct fire range of 1,500 meters when using a fire control system.

M4

At AUSA 2014, Saab Dynamics displayed its new Carl Gustaf M4 variant. Compared to the M3 MAAWS, the M4 is lighter, weighing, and shorter with a overall length. The shorter length was in response to the need to wield the weapon in urban terrain, and weight savings were achieved through using lighter components whenever possible including a carbon fiber tube with titanium liner, as well as a new venturi design. Other new features include a red-dot sight, a travel safety catch to allow the M4 to be carried while loaded, an adjustable shoulder rest and forward grip for improved ergonomics, a shot counter to keep track of how many rounds have been fired to manage the weapon's 1,000-round barrel life, picatinny rails for grips and sight mounts, and a remote round management function so intelligent sights can "talk" to programmable rounds.
The US Defense Department agreed to evaluate the shorter and lighter M4 version over the next two years; testing and qualifications were planned to be completed in spring 2017, and the weapon type classified as the M3E1 in fall 2017, making the system available for procurement to all Department of Defense services. The first unit is planned to be equipped with the M3E1 in 2018.
In April 2019, a contract of SEK168 million was approved to supply the Australian Army with ammunition for the Carl-Gustaf M4 84 mm multipurpose weapon systems ordered by the service in September 2018. In may 2020 Saab has received orders from Latvian Armed Forces and Estonian Armed Forces for deliveries of Carl-Gustaf® M4. Deliveries will take place in 2021-2024.
The orders are placed within a framework agreement signed by the Swedish Defence Materiel Administration in June 2019, which allows Sweden, Latvia and Estonia to place orders for Carl-Gustaf M4 weapon systems during a ten-year period.

Description

The basic weapon consists of the main tube with the breech-mounted Venturi recoil damper, with two grips near the front and a shoulder mount. The weapon is fitted with iron sights, but is normally aimed with the attached 3× optical sight with a 17 degree field of view. The most modern variants fielded by Swedish rifle companies have been fitted with the Swedish Aimpoint sighting system. Luminous front and rear sight inserts are available for the iron sights when aiming at night, and an image intensification system may also be used.
The Gustaf can be fired from the standing, kneeling, sitting or prone positions, and a bipod may be attached in front of the shoulder piece. An operating handle called the "Venturi lock" is used to move the hinged breech to one side for reloading. The weapon is normally operated by a two-man crew, one carrying and firing the weapon, the other carrying ammunition and reloading.

Specifications

Improvements to the ammunition have been continual. While the older HEAT rounds are not particularly effective against modern tank armor, the weapon has found new life as a bunker-buster with an HEDP round. In addition, improved HEAT, high explosive, smoke and illumination ammunition is also available. For full effectiveness, illumination rounds have to be fired at a very high angle, creating a danger for the gunner as the backblast from firing can burn him. For this reason, several armies have retired the illumination rounds, while the U.S. Army requires that they be fired from a standing position.
Note that the following are Swedish designations
The M3 Multi-role Anti-armor Anti-tank Weapon System is the U.S. military designation for the Carl Gustaf M3 recoilless rifle. It is primarily used by United States Special Operations Command such as the Army Rangers, Army Special Forces, Marine Raiders, Navy SEALs, and JSOC operators. When used by the U.S. Army's 75th Ranger Regiment, the M3 is known as the Ranger Anti-tank Weapons System .
In the late 1980s, the Special Operations Forces Modernization Action Plan indicated need for a Ranger Anti-Armor/Anti-Personnel Weapon System to replace the M67 recoilless rifle in use by the 75th Ranger Regiment. A market survey in 1987 indicated that the Carl Gustaf M3 was the best candidate for satisfying RAAWS requirements. On 29 September 1988, the M3 was selected as the RAAWS from candidate proposals submitted in response to the market survey compiled by ARDEC. A subsequent review of the contractor-supplied fatigue test data determined that the data did not meet U.S. Army requirements. Benét Laboratories conducted fatigue test of two tubes to establish an interim safe service life for the weapon. Tests were conducted in 1993. The manufacturer’s recommended life for the weapon was 500 rounds, but bore surfaces showed no indications of erosion until 2,360 rounds. The U.S. Navy SEALs became interested in the program and moved it to a Joint Integrated Product Team. The program name subsequently changed from the RAAWS to the Multi-Role Anti-Armor Anti-Personnel Weapon System.
Army Rangers found the M3 was best employed using a two-man team. One person would carry the launcher and be armed with a pistol for personal protection, and the other would carry 5–6 rounds of ammunition and act as a spotter for the gunner. Although the single-shot AT-4 is lighter and can be carried by one person, a Gustaf team with the heavier recoilless rifle can reload and fire more rounds.
The M3 MAAWS fires the following ammunition:
In late 2012, the Army fielded 58 M3s and 1,500 rounds of ammunition to units deployed to Afghanistan to destroy enemy targets out to 1,000 meters. This was because RPG and machine gun teams could attack 900 meters away, while existing weaponry such as the M141 Bunker Defeat Munition, M72 LAW, M136 AT-4, and MK153 SMAW have effective ranges of only 500 meters. The AT-4 is lighter and cheaper but is made of reinforced fiberglass, while the M3's rifled metal/carbon fiber launch tube allows for reloading. Employing the 22 lb M3 is easier than the 50 lb FGM-148 Javelin with its launcher with missile and reusable command launch unit, is faster than waiting on mortars, and is cheaper than the Javelin and artillery shells for engaging targets in hard cover. Although Special Operations forces had been using the M3 since the early 1990s, light infantry unit commanders in Afghanistan had to submit operational needs statements to get the weapon. The M3 became an official program of record in the conventional Army in 2014, and a conditional materiel release was authorized in late 2015 to equip all brigade combat teams with one M3 launcher per infantry platoon.

M3-E1

M3 was the name used for decades worldwide for the basic weapon. For the new, improved, lighter, titanium employing weapon, first displayed in 2014, the name everyone uses is: M4, except for the US. In the US the Army designation for the US version of the improved M4 mentioned above was given the name: M3-E1.
In 2017, the U.S. Army approved a requirement for 1,111 M3E1 units to be fielded to soldiers as part of an Urgent Material Release. The M3E1 is part of the Product Manager Crew Served Weapon portfolio. A key benefit of the M3E1 is that it can fire multiple types of rounds, giving soldiers increased capability on the battlefield. By using titanium, the updated M3E1, based on the M3A1 introduced in 2014, is more than six pounds lighter. The M3E1 is also 2.5 inches shorter and has an improved carrying handle, shoulder padding and an improved sighting system that can be adjusted for better comfort without sacrificing performance. The wiring harness was included in the M3E1 configuration that provides a foregrip controller and programmable fuze setter for an interchangeable fire control system. For added safety and cost savings, an automatic round counter enables Soldiers and logisticians to accurately track the service life of each weapon. The M3E1 uses the same family of ammunition as the M3, which has been successfully tested.
In November 2017, the U.S. Marine Corps announced they planned to procure the M3E1 MAAWS. 1,200 M3E1s would be acquired with one fielded to every infantry squad. In addition to infantry use, the Marines are considering it to replace the Mk 153 SMAW in combat engineer squads. The weapons perform similar functions and the improvements incorporated into the new M3E1 place it in the same size and approximate weight class as the SMAW. While the SMAW weighs less when loaded, the MAAWS has a greater variety of ammunition available and a maximum effective range of 1,000 meters, twice that of the SMAW. The Marines plan to test both weapons' effectiveness against bunkers to inform their decision.

Risks to users

The overpressure or blast wave generated by the Gustaf, will cause blast and burn related injuries to those behind the weapon, and is dangerous to 30 meters and hazardous to about 50 to 75 meters. Repeatedly firing the Gustaf can also cause related shock wave injuries to gunners and those nearby. As a result, during training, gunners are only allowed to fire six rounds a day. The assistant gunners would also often move away from the overpressure zone, so that they too can fire six rounds a day.

Comparison to similar weapons

Data is from Jane's Infantry Weapons 1984–85

Users

Western Army Infantry Regiment soldiers operating the Howa 84RR in February 2014. The Howa 84RR is a Japanese-made version of the Carl Gustaf.
soldiers during familiarization training of M3 recoilless rifle at Fort Bragg, North Carolina in December 2011.