A catalytic heater is a flameless heater which relies on catalyzedchemical reactions to break down molecules and produce califaction. When the catalyst, natural gas, and oxygen combine together they ignite at a low enough temperatures that a flame is not needed. This process keeps repeating itself until either oxygen or the fuel source is taken out of the equation.
Heated enclosure packages are used to protect pipes from rain and ice build-up by keeping the pipes heated. The catalytic heater is contained within the package which is usually made out of stainless-steel. Instrument gas and pilot preheating regulators are only used for freeze protection, and to heat up the gas before it reaches the pilot. It can also be used to heat a stream of gas that's used for measurement or instrumentation. Space heating is a good substitution when heat is required but traditional means, such as electricity or safety concerns over explosive gas, can't be used. Catalytic space heaters generate infrared heat to raise the temperature in a given area.
Functions
Catalytic heaters serve many functions, especially in the oil and gas industries. They are useful where heat production is necessary at a controlled rate. They can be used in gas meters, regulators and control valves, gas wellhead heaters, pipeline heaters, space heaters, and. They can also be used at the gate and compressor stations. Some other examples would include soldering irons, hand warmers, and space-heating appliances. Catalytic heaters have high efficiency allowing smaller heaters to be used, therefore lowering initial costs and fuel consumption. These heaters typically use propane or butane fuel, whereas many older types use either liquid fuel or alcohol. Handheld catalytic hand warmers have traditionally only used naphtha-type liquid fuel.
Safety
Certain safety measures should be taken when using a catalytic heater. Catalytic heaters should be installed properly to prevent fuel leakage because inhaling excessive amounts of natural gas can cause severe side effects. These heaters should all be placed in areas with good ventilation to help prevent this from happening. The user should be aware of carbon monoxide poisoning and its symptoms. As catalytic heaters are completely flameless, this takes away any inherent fire risk. These heaters have also been found to be non- when exposed to flammable gasses directly, although it can still happen on rare occasions. It's also advised not to leave catalytic heaters unattended for any amount of time due to malfunctions that could occur and to prevent it from being knocked over. It's also advised, for residential catalytic heaters, to turn them off while the user is asleep.
