Celestial globesshow the apparent positions of the stars in the sky. They omit the Sun, Moon, and planets because the positions of these bodies vary relative to those of the stars, but the ecliptic, along which the Sun moves, is indicated. There is an issue regarding the “handedness” of celestial globes. If the globe is constructed so that the stars are in the positions they actually occupy on the imaginary celestial sphere, then the starfield will appear reversed on the surface of the globe. This is because the view from Earth, positioned at the centre of the celestial sphere, is of the gnomonic projectioninside of the celestial sphere, whereas the celestial globe is orthographic projection as viewed from the outside. For this reason, celestial globes are often produced in mirror image, so that at least the constellations appear as viewed from earth. Some modern celestial globes address this problem by making the surface of the globe transparent. The stars can then be placed in their proper positions and viewed through the globe, so that the view is of the inside of the celestial sphere. However, the proper position from which to view the sphere would be from its centre, but the viewer of a transparent globe must be outside it, far from its centre. Viewing the inside of the sphere from the outside, through its transparent surface, produces serious distortions. Opaque celestial globes that are made with the constellations correctly placed, so they appear as mirror images when directly viewed from outside the globe, are often viewed in a mirror, so the constellations have their familiar appearances. Written material on the globe, e.g. constellationnames, is printed in reverse, so it can easily be read in the mirror.
There are various records found in Kashmir in the Indian subcontinent of the production of seamless celestial globes by Ali Kashmiri ibn Luqman in 998 AH, and twenty other such globes were later produced in Lahore and Kashmir during the Mughal Empire. Before they were rediscovered in the 1980s, it was believed by modern metallurgists to be technically impossible to produce metal globes without any seams.
