Central Cotton Research Institute
Central Cotton Research Institute Multan, established in 1970 in Multan, Pakistan, is one of the renowned research institutes of Pakistan. The institute has many divisions dedicated to different aspects of cotton research including Agronomy, Breeding and Genetics, Cytogenetics, Physiology, Fiber Technology, Statistics and Agricultural Engineering.
Over the years, many achievements have been made in the development of high yielding varieties with standard fibre quality characteristics like staple length, fineness and strength etc. The fine tuning of production technology at the grass-root level of common farming community to the progressive farmers has made tremendous impact on enhancing cotton productivity.
At the time of establishment of the Institute in 1970, the cotton productivity was 370 kg per hectare which has now risen to the level of 772 kg per hectare during the current year. The continuous and untiring research endeavors of the scientists have yielded 20 cotton varieties. The introduction of efficient water use technologies i.e. bed-furrow sowing technique, identification of water stress & heat tolerant cotton varieties and other water saving techniques were advocated to the farmers to economize cotton production.
Salient features of five new varieties viz. CIM-612, Cyto-124, Bt.CIM-600, Bt.CIM-616 and Bt.Cyto-177 were presented in the 71st Meeting of the Expert Sub Committee held at Ayub Agricultural Research Institute, Faisalabad on 09.03.2015. Apart from having up to the standard fibre quality traits, Bt.CIM-600 is tolerant to heat stress whereas Bt.CIM-616, CIM-612 and Bt.Cyto-177 are highly CLCuV tolerant with promising yield potential.
The Institute has made tremendous efforts in popularizing the technology for herbicide use in weed management. The continuous research on screening of weedicides and fine tuning of their application techniques is another milestone of this Institute. The quantification of optimized fertilizer levels, application methodologies for efficient utilization and exploring the alternate nutrient sources remained as a continuous endeavor to achieve yield sustainability. The technique of plant mapping, disseminated from this Institute, for forecasting/ estimating yield potential is being practiced by the various research, academia and government departments.
In the field of plant protection, the invasion of secondary pests like mealybug, dusky cotton bug and red cotton bug are becoming potential threats to achieve yield targets. A due attention is being made to devise pest management strategies to tackle these emerging pests. In the scenario of extended Bt cotton cultivation, the research has been diverted towards this new dimension for controlling sucking pests and studies on resistance management accrued due to inbuilt bollworm resistance in cotton plant.
The country has suffered huge financial losses due to yield reduction in cotton crop caused by the wide scale infestation of cotton leaf curl virus disease. Accepting this hard challenge, the scientists at the Institute were able to evolve varieties through introgression that have a high degree of tolerance to CLCuV. A variety Cyto-124, which is recently recommended by Expert Sub Committee, has shown its stability towards virus tolerance in early as well as late sowing. A couple of more promising genotypes are in pipeline. The contribution in the development of disease resistance is the outcome of continuous involvement by the Pathology Section for quantification and transformation of resistant character and its build up in the new genetic material.
The development of new varieties is based on the maintenance of high fibre quality traits to cope with the standards of the textile industry. The varieties released by the Institute are stable and maintain their fibre quality under various ecological zones. The Institute is at advanced level in developing transgenic cotton through classical breeding along with biotechnological tools. Results of the data gathered from the experiments and surveys cannot be deduced or inferred without the statistical analysis. The mass scale statistical analysis of data has made success to bring out this 44th Progress Report of the Institute. The results are not confined in the four-walls of the Institute. Message dissemination measures through print and electronic media, personal communication, training of farmers, field staff of seed, fertilizer and NGOs remained a regular phenomena throughout the year. Various programs are televised through TV channels based at Multan.
Plant breeding and genetics
The main focus of the scientists of Breeding and Genetics Section, CCRI, Multan is to develop and commercialize Bt. and non-Bt. new cotton varieties with inbuilt resistance/tolerance against the biotic and abiotic stresses along with desirable fibre traits. Development of germplasm has a key role in the process of variety development. This section holds its own recognition in this aspect. Two Bt. varieties Bt. CIM-600, Bt. CIM-616 and one non Bt. Variety CIM-612 were submitted for approval to Expert Sub-Committee. Six advanced Bt. strains were evaluated at Multan and Khanewal locations. The new strain Bt.CIM-616 gave best performance at both the locations. The strain had the lint percentage of 41.7 with the staple length of 28.8 mm and micronaire of 4.7 µg inch-1. The fibre strength of the strain is very good up to 100.3 tppsi. Seven advanced non-Bt. strains were also evaluated at Multan and Khanewal locations. The new strain CIM-716 produced the highest seed cotton yield on overall basis. All these strains have the desirable fibre characteristics. The crosses with exotic material from France and Mac-7 for induction of CLCuD resistant/tolerance are in different filial generations.Cytogenetics
The intent was to travel around the possibilities of transferring enviable genes of the wild species to the cultivated cotton for commercial exploitation and to study inter and intra-genomic relationships in the genus Gossypium. The research work of Cytogenetics Section encompass maintenance of Gossypium germplasm to develop promising varieties, through introgression, which are resistant/tolerant to biotic and abiotic stresses with special hub on Burewala Strain of cotton leaf curl virus. Cytological studies of a newly developed inter-specific hybrid was undertaken. The material industrial through multiple species hybridization viz F7 of x G. hirs. were sown in single lines. Out of the 286 families 90 families remained free from virus under field conditions throughout the entire cotton season. Conversion of CLCuD tolerant lines in transgenic lines using back cross method is under observation in different filial generations i.e. F1, F2, F3, F4and F5.Different shades of brown cotton were observed in F2.Grey colour is also found in this material. All these shades have suitable fibre length. Search for aneuploids especially haploids remained in steps forward. Cyto material developed through multiple species hybridization was tested in progeny row trials, micro-varietal trials, Micro varietal trials and ZVT to observe their economic and fibre characteristics.
Bt Cyto-177and Cyto-124, varieties developed through introgression has been sent for recommendation to Expert Sub Committee on 9 March 2015. Both lines have completed two years in NCVT, PCCT, ZVT and DGR trials for its wider adaptability in different ecological zones. Cyto-179 will be tested in NCVT, PCCT and ZVT trials for its wider adoptability in different ecological zones.
Agronomy
Cotton agronomy fixes special significance in utilizing natural resources in the best available management techniques for achieving higher productivity in certain agro-ecological zones. The research carried out showed that planting of cotton in the second week of April is the best choice for achieving higher production. The delaying in planting time results in the successive decrease in yield. Genotypes CIM-608 produced higher yield over CIM-620 and Cyto-124. Application of 200 kg N ha-1 to non Bt. cotton gave non significant increase in seed cotton yield over 150 kg N ha-1. The research findings showed that planting of transgenic cotton on 1 March produced the highest yield as compared to other planting dates i.e. 15 March, 1 April, 15 April, 1 & 15 May. Genotype Bt.CIM-616 produced significantly higher seed cotton yield as compared to Bt.Cyto-177 and Bt.CIM-598. Nitrogenous fertilizer @ 400 kg ha-1 produced significantly higher seed cotton yield in transgenic cotton over 300 kg N ha-1.The result revealed that cotton planting as relay crop produced maximum seed cotton yield than fallow land early planting. Planting of cotton under modified technique produced 13, 99.5 and 105.3% higher cotton yield over fallow land, wide row and after wheat harvesting, respectively. The cost of production for the year 2014-15 was Rs. 73907 ac-1.
Entomology
Plant protection strategy and activities have significant importance in the overall crop production programmes for sustainable agriculture. Variation of Bt gene expression in different cultivars over time and efficacy to bollworms are the main concern nowadays, studies undertaken on Earias spp proved the concerned. Similarly the efficacy of Bt cotton in the field is losing efficacy against the pink bollworm, survey conducted revealed high infestations in green bolls. Monitoring of lepidopterous pest population viz sex pheromone and light traps was carried out and forecast the increasing trend in all bollworms population. Studies on red and dusky cotton bugs continued and efforts are made to find bio agents for long term solutions. Seed treatment effect and development of natural on early and normal planting studies revealed that the population of jassid was more on early sown field than normal sowing also the natural fauna was recorded higher in the early sown. The distinct efforts of researchers of the section have proved meaningful in devising pest management strategies against common and new emerging insect pests through application of IPM. Studies are continued on host plant tolerance of CCRI, Multan and National Coordinated Bt. & non-Bt. Strains. The section also studied effect of different IPM strategies on insect pest for transgenic cotton. Screening of new insecticides was also conducted against major insect pests of cotton.Fiber technology
Fibre Technology section was established in 1976. The prime objective of Fibre Technology section is to provide technical support to Plant Breeding & Cytogenetics sections in testing of fibre characteristics and spinning potential of newly developed cotton cultivars & strains and facilitates the other sections of the institute as well, to investigate the effect of different agricultural practices on fibre characteristics. The section is extending services to other cotton research stations of PCCC, Government & private cotton agencies, commercial organizations, textile industry, progressive growers and providing research facilities and technical support to the research scholars from various textile institutes and universities in fibre testing and spinning of their research material. Apart from lab work, the section is also contributes in collaborative research studies with different sections of the institute.Testing Facilities
Fibre technology section is equipped with sophisticated and scientific fibre testing instruments and micro-spinning facility.