Centurion ARV Mk II


The Centurion ARV Mk II, was a British armoured recovery vehicle based on the Centurion main battle tank.

History

The Centurion Mk II ARV consisted of a basic tank hull with a box-like superstructure in place of the turret. This accommodated the winch and a separate winch engine, a 160 hp Rolls Royce B80. The winch engine powered a generator providing electric power to the winch. The cable emerged from the back of the winch housing and a rear mounted spade gave stability whilst winching. The vehicle was used by Australia, India, Israel, the Netherlands, Sweden, Switzerland as well as the United Kingdom.
The first prototype of the Centurion Mk II ARV was developed by the Fighting Vehicles Research and Development Establishment as the ARV FV 4006 and completed in 1952–53. After user trials, the first production vehicles were completed by Vickers at Elswick in 1956–57.
Some Mk 2's used the hulls of former gun tanks or tugs but most were newly built as ARVs.
From 1956 to 1960, the Swiss army bought 30 Entpannungspanzer 56 Centurion. These were used until 1991 with the numbers M + 78601 to M + 78630. In 1988 the first ten vehicles were scrapped. In 1991, 19 vehicles were sold to Sweden and a vehicle was retained for the army's collection. The Entpannungspanzer 56 Centurion sold to Sweden were painted with the camouflage of the Swedish army and were equipped with minor modifications to the radio, fog dispensers, lighting, etc. In 2011, the second vehicle of the first series with the former number M + 78602 was taken back from Sweden and has since been exhibited in the Swiss Military Museum Full.
In addition to the main engine, a Rover Meteor mark IVB1, the Entpannungspanzer 56 Centurion has an auxiliary engine and a winch motor. With a fuel tank of 1045 litres, its fuel consumption of on the road and off-road was very high, which affected efficiency and range.