Chemokine


Chemokines are a family of small cytokines, or signaling proteins secreted by cells. Their name is derived from their ability to induce directed chemotaxis in nearby responsive cells; they are chemotactic cytokines.
Cytokine proteins are classified as chemokines according to behavior and structural characteristics. In addition to being known for mediating chemotaxis, chemokines are all approximately 8-10 kilodaltons in mass and have four cysteine residues in conserved locations that are key to forming their 3-dimensional shape.
These proteins have historically been known under several other names including the SIS family of cytokines, SIG family of cytokines, SCY family of cytokines, Platelet factor-4 superfamily or intercrines. Some chemokines are considered pro-inflammatory and can be induced during an immune response to recruit cells of the immune system to a site of infection, while others are considered homeostatic and are involved in controlling the migration of cells during normal processes of tissue maintenance or development. Chemokines are found in all vertebrates, some viruses and some bacteria, but none have been found in other invertebrates.
Chemokines have been classified into four main subfamilies: CXC, CC, CX3C and XC. All of these proteins exert their biological effects by interacting with G protein-linked transmembrane receptors called chemokine receptors, that are selectively found on the surfaces of their target cells.

Function

The major role of chemokines is to act as a chemoattractant to guide the migration of cells. Cells that are attracted by chemokines follow a signal of increasing chemokine concentration towards the source of the chemokine. Some chemokines control cells of the immune system during processes of immune surveillance, such as directing lymphocytes to the lymph nodes so they can screen for invasion of pathogens by interacting with antigen-presenting cells residing in these tissues. These are known as homeostatic chemokines and are produced and secreted without any need to stimulate their source cell. Some chemokines have roles in development; they promote angiogenesis, or guide cells to tissues that provide specific signals critical for cellular maturation. Other chemokines are inflammatory and are released from a wide variety of cells in response to bacterial infection, viruses and agents that cause physical damage such as silica or the urate crystals that occur in gout. Their release is often stimulated by pro-inflammatory cytokines such as interleukin 1. Inflammatory chemokines function mainly as chemoattractants for leukocytes, recruiting monocytes, neutrophils and other effector cells from the blood to sites of infection or tissue damage. Certain inflammatory chemokines activate cells to initiate an immune response or promote wound healing. They are released by many different cell types and serve to guide cells of both innate immune system and adaptive immune system.

Types by function

Chemokines are functionally divided into two groups:
The main function of chemokines is to manage the migration of leukocytes in the respective anatomical locations in inflammatory and homeostatic processes.
Basal: homeostatic chemokines are basal produced in the thymus and lymphoid tissues. Their homeostatic function in homing is best exemplified by the chemokines CCL19 and CCL21 and their receptor CCR7. Using these ligands is possible routing antigen-presenting cells to lymph nodes during the adaptive immune response. Among other homeostatic chemokine receptors include: CCR9, CCR10, and CXCR5, which are important as part of the cell addresses for tissue-specific homing of leukocytes. CCR9 supports the migration of leukocytes into the intestine, CCR10 to the skin and CXCR5 supports the migration of B-cell to follicles of lymph nodes. As well CXCL12 constitutively produced in the bone marrow promotes proliferation of progenitor B cells in the bone marrow microenvironment.
Inflammatory: inflammatory chemokines are produced in high concentrations during infection or injury and determine the migration of inflammatory leukocytes into the damaged area. Typical inflammatory chemokines include: CCL2, CCL3 and CCL5, CXCL1, CXCL2 and CXCL8. A typical example is CXCL-8, which acts as a chemoattractant for neutrophils. In contrast to the homeostatic chemokine receptors, there is significant promiscuity associated with binding receptor and inflammatory chemokines. This often complicates research on receptor-specific therapeutics in this area.

Types by cell attracted

Proteins are classified into the chemokine family based on their structural characteristics, not just their ability to attract cells. All chemokines are small, with a molecular mass of between 8 and 10 kDa. They are approximately 20-50% identical to each other; that is, they share gene sequence and amino acid sequence homology. They all also possess conserved amino acids that are important for creating their 3-dimensional or tertiary structure, such as four cysteines that interact with each other in pairs to create a Greek key shape that is a characteristic of chemokines. Intramolecular disulfide bonds typically join the first to third, and the second to fourth cysteine residues, numbered as they appear in the protein sequence of the chemokine. Typical chemokine proteins are produced as pro-peptides, beginning with a signal peptide of approximately 20 amino acids that gets cleaved from the active portion of the molecule during the process of its secretion from the cell. The first two cysteines, in a chemokine, are situated close together near the N-terminal end of the mature protein, with the third cysteine residing in the centre of the molecule and the fourth close to the C-terminal end. A loop of approximately ten amino acids follows the first two cysteines and is known as the N-loop. This is followed by a single-turn helix, called a 310-helix, three β-strands and a C-terminal α-helix. These helices and strands are connected by turns called 30s, 40s and 50s loops; the third and fourth cysteines are located in the 30s and 50s loops.

Types by structure

Members of the chemokine family are divided into four groups depending on the spacing of their first two cysteine residues. Thus the nomenclature for chemokines is, e.g.: CCL1 for the ligand 1 of the CC-family of chemokines, and CCR1 for its respective receptor.

CC chemokines

The CC chemokine proteins have two adjacent cysteines, near their amino terminus.
There have been at least 27 distinct members of this subgroup reported for mammals, called CC chemokine ligands -1 to -28; CCL10 is the same as CCL9. Chemokines of this subfamily usually contain four cysteines, but a small number of CC chemokines possess six cysteines. C6-CC chemokines include CCL1, CCL15, CCL21, CCL23 and CCL28. CC chemokines induce the migration of monocytes and other cell types such as NK cells and dendritic cells.
Examples of CC chemokine include monocyte chemoattractant protein-1 which induces monocytes to leave the bloodstream and enter the surrounding tissue to become tissue macrophages.
CCL5 attracts cells such as T cells, eosinophils and basophils that express the receptor CCR5.
Increased CCL11 levels in blood plasma are associated with aging in mice and humans.

CXC chemokines

The two N-terminal cysteines of CXC chemokines are separated by one amino acid, represented in this name with an "X". There have been 17 different CXC chemokines described in mammals, that are subdivided into two categories, those with a specific amino acid sequence of glutamic acid-leucine-arginine immediately before the first cysteine of the CXC motif, and those without an ELR motif. ELR-positive CXC chemokines specifically induce the migration of neutrophils, and interact with chemokine receptors CXCR1 and CXCR2. An example of an ELR-positive CXC chemokine is interleukin-8, which induces neutrophils to leave the bloodstream and enter into the surrounding tissue. Other CXC chemokines that lack the ELR motif, such as CXCL13, tend to be chemoattractant for lymphocytes. CXC chemokines bind to CXC chemokine receptors, of which seven have been discovered to date, designated CXCR1-7.

C chemokines

The third group of chemokines is known as the C chemokines, and is unlike all other chemokines in that it has only two cysteines; one N-terminal cysteine and one cysteine downstream. Two chemokines have been described for this subgroup and are called XCL1 and XCL2.

CX3C chemokines

A fourth group has also been discovered and members have three amino acids between the two cysteines and is termed CX3C chemokine. The only CX3C chemokine discovered to date is called fractalkine. It is both secreted and tethered to the surface of the cell that expresses it, thereby serving as both a chemoattractant and as an adhesion molecule.

Receptors

s are G protein-coupled receptors containing 7 transmembrane domains that are found on the surface of leukocytes. Approximately 19 different chemokine receptors have been characterized to date, which are divided into four families depending on the type of chemokine they bind; CXCR that bind CXC chemokines, CCR that bind CC chemokines, CX3CR1 that binds the sole CX3C chemokine, and XCR1 that binds the two XC chemokines. They share many structural features; they are similar in size, have a short, acidic N-terminal end, seven helical transmembrane domains with three intracellular and three extracellular hydrophilic loops, and an intracellular C-terminus containing serine and threonine residues important for receptor regulation. The first two extracellular loops of chemokine receptors each has a conserved cysteine residue that allow formation of a disulfide bridge between these loops. G proteins are coupled to the C-terminal end of the chemokine receptor to allow intracellular signaling after receptor activation, while the N-terminal domain of the chemokine receptor determines ligand binding specificity.

Signal transduction

Chemokine receptors associate with G-proteins to transmit cell signals following ligand binding. Activation of G proteins, by chemokine receptors, causes the subsequent activation of an enzyme known as phospholipase C. PLC cleaves a molecule called phosphatidylinositol -bisphosphate into two second messenger molecules known as Inositol triphosphate and diacylglycerol that trigger intracellular signaling events; DAG activates another enzyme called protein kinase C, and IP3 triggers the release of calcium from intracellular stores. These events promote many signaling cascades that generate responses like chemotaxis, degranulation, release of superoxide anions and changes in the avidity of cell adhesion molecules called integrins within the cell harbouring the chemokine receptor.

Infection control

The discovery that the β chemokines RANTES, MIP 1α and 1β suppress HIV-1 provided the initial connection and indicated that these molecules might control infection as part of immune responses in vivo, and that sustained delivery of such inhibitors have the capacity of long-term infection control. The association of chemokine production with antigen-induced proliferative responses, more favorable clinical status in HIV infection, as well as with an uninfected status in subjects at risk for infection suggests a positive role for these molecules in controlling the natural course of HIV infection.