Cherub (dinghy)


The Cherub is a 12 feet long, high performance, two-person, planing dinghy first designed in 1951 in New Zealand by John Spencer . The class is a development class, allowing for significant variation in design between different boats within the rule framework. The minimum hull weight was originally 110 lbs.

History

In 1951 New Zealand naval architect John Spencer designed a 12 foot dinghy for his friend Ray Early to sail on Auckland Harbour. The boat was built to race in the Pennant Class and was named Cherub. Its superiority over other designs in the Pennant Class was immediately evident. Within a very short period of time a number of boats were racing in Auckland. A New Zealand class owner’s association was established in 1952.
The first manufacturer in the United Kingdom was McCutcheon's of Cowes in 1956. By 1963 there were 112 Cherubs registered in the UK. Basil Wright was instrumental in introducing the class to Australia when a fleet of six Cherubs were built at the Mounts Bay Sailing Club for the 1960-61 sailing season. The class spread quickly in Australia and when the first Australian National Championships were raced in 1963-64 at Newhaven Yacht Squadron in Victoria, there were representatives from Western Australia, Victoria and Queensland.
The Cherub Class International Association was formed in 1967. The inaugural World Championship were sailed in Perth Western Australia in early 1970.

Design

The Cherub is Bermuda-rigged with trapeze, and has a crew of two. The Cherub has been through a number of changes. In the 1950s the designs had considerable keel rocker. The most popular design from this era was Spencer's Mk7 built in plywood but by 1971 most successful designs had much less rocker and flatter sections aft to promote planning. Considerable care was needed to achieve the 110 lbs hull weight. In 1970 the small jib was enlarged to an overlapping genoa about 8 square feet bigger. By the late 1960s new boats were being built with aluminium masts which were lighter and stiffer. Up to 1980 boats were generally built from 3 and 4 mm plywood but after this some were made from foam sandwich construction pioneered by Russell Bowler in New Zealand. Some Cherubs did dual service in New Zealand sailing in the Q class. The Cherub hull was used with a short bowsprit, a taller mast and much larger sail area with both the crew and skipper using trapezes.
Current Cherubs use an asymmetric spinnaker system but earlier boats used relatively large double luff spinnakers and used a notably long spinnaker pole. Cherubs have a high power-to-weight ratio and are very quick downwind in stronger breezes but can be slow upwind in lighter airs compared to longer boats.
The class differs in detail specification between the Northern and Southern Hemispheres. The Northern boats, often referred to as UK Cherubs, use a second trapeze and permit appreciably larger sails than the Southern Hemisphere boats.
The UK Cherub has a RYA Portsmouth number of 930.

Sailing and Racing

Many Cherub sailors are in their late teens or early twenties but the flexibility of the class and the Cherub’s great sailing qualities mean that they are also attractive to many older sailors. Many women sail Cherubs, both as skippers and as crews. Husband/wife, boyfriend/girlfriend, brother/sister and parent/child combinations of crew are common. In the 1960s and 1970s the Cherub was a popular sailing dinghy in New Zealand when they were mainly amateur built. Cherubs are nowadays mainly sailed in Australia and the UK, with some boats in other countries, notably France and small numbers in New Zealand.

Regattas

Australia