Cisco IOS


Cisco Internetwork Operating System is a family of network operating systems used on many Cisco Systems routers and current Cisco network switches. Earlier, Cisco switches ran CatOS. IOS is a package of routing, switching, internetworking and telecommunications functions integrated into a multitasking operating system. Although the IOS code base includes a cooperative multitasking kernel, most IOS features have been ported to other kernels such as QNX and Linux for use in Cisco products.
Not all Cisco products run IOS. Notable exceptions include ASA security products, which run a Linux-derived operating system, carrier routers which run IOS-XR and Cisco's Nexus switch and FC switch products which run Cisco NX-OS.

History

The IOS network operating system was developed in the 1980s for routers that had only 256 kB memory and low CPU processing power. Through modular extensions IOS has been adapted to increasing hardware capabilities and new networking protocols. When IOS was developed, Cisco Systems' main product line were routers. The company acquired a number of young companies that focused on network switches, such as the inventor of the first Ethernet switch Kalpana, and as a result Cisco switches did not run the IOS. The Cisco Catalyst series would for some time run the CatOS. In early modular chassis network switches from Cisco, modules with layer 3 routing functionalities were separate devices that ran IOS, while the layer 2 switch modules ran CatOS. Cisco eventually introduced the native mode for chassis, so that they only run one operating system. For the Nexus switches Cisco developed NX-OS, which is similar to IOS, except that it is Linux-based.

Command-line interface

The IOS command-line interface provides a fixed set of multiple-word commands. The set available is determined by the "mode" and the privilege level of the current user. "Global configuration mode" provides commands to change the system's configuration, and "interface configuration mode" provides commands to change the configuration of a specific interface. All commands are assigned a privilege level, from 0 to 15, and can only be accessed by users with the necessary privilege. Through the CLI, the commands available to each privilege level can be defined.
Most builds of IOS include a Tcl interpreter. Using the embedded event manager feature, the interpreter can be scripted to react to events within the networking environment, such as interface failure or periodic timers.
Available command modes include:
Cisco IOS has a monolithic architecture, owing to the limited hardware resources of routers and switches in the 1980s. This means that all processes have direct hardware access to conserve CPU processing time. There is no memory protection between processes and IOS has a run to completion scheduler, which means that the kernel does not pre-empt a running process. Instead the process must make a kernel call before other processes get a chance to run. IOS considers each process a single thread and assigns it a priority value, so that high priority processes are executed on the CPU before queued low priority processes, but high priority processes can not interrupt running low priority processes.
The Cisco IOS monolithic kernel does not implement memory protection for the data of different processes. The entire physical memory is mapped into one virtual address space. The Cisco IOS kernel does not perform any memory paging or swapping. Therefore the addressable memory is limited to the physical memory of the network device on which the operating system is installed. IOS does however support aliasing of duplicated virtual memory contents to the same physical memory. This architecture was implemented by Cisco in order to ensure system performance and minimize the operational overheads of the operating system.
The disadvantage of the IOS architecture is that it increases the complexity of the operating system, data corruption is possible as one process can write over the data of another, and one process can destabilize the entire operating system or even cause a software-forced crash. In the event of an IOS crash, the operating system automatically reboots and reloads the saved configuration.

Routing

In all versions of Cisco IOS, packet routing and forwarding are distinct functions. Routing and other protocols run as Cisco IOS processes and contribute to the Routing Information Base. This is processed to generate the final IP forwarding table, which is used by the forwarding function of the router. On router platforms with software-only forwarding, most traffic handling, including access control list filtering and forwarding, is done at interrupt level using Cisco Express Forwarding or dCEF. This means IOS does not have to do a process context switch to forward a packet. Routing functions such as OSPF or BGP run at the process level. In routers with hardware-based forwarding, such as the Cisco 12000 series, IOS computes the FIB in software and loads it into the forwarding hardware, which performs the actual packet forwarding function.

Interface descriptor block

An Interface Descriptor Block, or simply IDB, is a portion of memory or Cisco IOS internal data structure that contains information such as the IP address, interface state, and packet statistics for networking data. Cisco's IOS software maintains one IDB for each hardware interface in a particular Cisco switch or router and one IDB for each subinterface. The number of IDBs present in a system varies with the Cisco hardware platform type.

Packages and feature sets

IOS is shipped as a unique file that has been compiled for specific Cisco network devices. Each IOS Image therefore include a feature set, which determine the command-line interface commands and features that are available on different Cisco devices. Upgrading to another feature set therefore entails the installation of a new IOS image on the networking device and reloading the IOS operating system. Information about the IOS version and feature-set running on a Cisco device can be obtained with the show version command.
Most Cisco products that run IOS also have one or more "feature sets" or "packages", typically eight packages for Cisco routers and five packages for Cisco network switches. For example, Cisco IOS releases meant for use on Catalyst switches are available as "standard" versions, "enhanced" versions, which provide full IPv4 routing support, and "advanced IP services" versions, which provide the enhanced features as well as IPv6 support.
Beginning with the 1900, 2900 and 3900 series of ISR Routers, Cisco revised the licensing model of IOS. To simplify the process of enlarging the feature-set and reduce the need for network operating system reloads, Cisco introduced universal IOS images, that include all features available for a device and customers may unlock certain features by purchasing an additional software license. The exact feature set required for a particular function can be determined using the . Routers come with IP Base installed, and additional feature pack licenses can be installed as bolt-on additions to expand the feature set of the device. The available feature packs are:
ISO images can not be updated with software bug fixes. To patch a vulnerability in an IOS a binary file with the entire operating system needs to be loaded.

Versioning

Cisco IOS is versioned using three numbers and some letters, in the general form a.be, where:
Rebuilds – Often a rebuild is compiled to fix a single specific problem or vulnerability for a given IOS version. For example, 12.1E14 is a Rebuild, the 14 denoting the 14th rebuild of 12.1E. Rebuilds are produced to either quickly repair a defect, or to satisfy customers who do not want to upgrade to a later major revision because they may be running critical infrastructure on their devices, and hence prefer to minimize change and risk.
Interim releases – Are usually produced on a weekly basis, and form a roll-up of current development effort. The Cisco advisory web site may list more than one possible interim to fix an associated issue.
Maintenance releases – Rigorously tested releases that are made available and include enhancements and bug fixes. Cisco recommend upgrading to Maintenance releases where possible, over Interim and Rebuild releases.

Trains

Cisco says, "A train is a vehicle for delivering Cisco software to a specific set of platforms and features."

Until 12.4

Before Cisco IOS release 15, releases were split into several trains, each containing a different set of features. Trains more or less map onto distinct markets or groups of customers that Cisco targeted.
There were other trains from time to time, designed for specific needs — for example, the 12.0AA train contained new code required for Cisco's AS5800 product.

Since 15.0

Starting with Cisco IOS release 15, there is just a single train, the M/T train. This train includes both extended maintenance releases and standard maintenance releases. The M releases are extended maintenance releases, and Cisco will provide bug fixes for 44 months. The T releases are standard maintenance releases, and Cisco will only provide bug fixes for 18 months.

Security and vulnerabilities

Because IOS needs to know the cleartext password for certain uses, passwords entered into the CLI by default are weakly encrypted as 'Type 7' ciphertext, such as "Router#username jdoe password 7 0832585B1910010713181F". This is designed to prevent "shoulder-surfing" attacks when viewing router configurations and is not secure – they are easily decrypted using software called "getpass" available since 1995, or "ios7crypt", a modern variant, although the passwords can be decoded by the router using the "key chain" command and entering the type 7 password as the key, and then issuing a "show key" command; the above example decrypts to "stupidpass". However, the program will not decrypt 'Type 5' passwords or passwords set with the enable secret command, which uses salted MD5 hashes.
Cisco recommends that all Cisco IOS devices implement the authentication, authorization, and accounting security model. AAA can use local, RADIUS, and TACACS+ databases. However, a local account is usually still required for emergency situations.
At the Black Hat Briefings conference in July 2005, Michael Lynn, working for Internet Security Systems at the time, presented information about a vulnerability in IOS.
Cisco had already issued a patch, but asked that the flaw not be disclosed.
Cisco filed a lawsuit, but settled after an injunction was issued to prevent further disclosures.

IOS XR train

For Cisco products that required very high availability, such as the Cisco CRS-1, the limitations of a monolithic kernel were not acceptable. In addition, competitive router operating systems that emerged 10–20 years after IOS, such as Juniper's JUNOS, were designed not to have these limitations. Cisco's response was to develop a tree of the Cisco IOS that offered modularity and memory protection between processes, lightweight threads, pre-emptive scheduling and the ability to independently restart failed processes. The IOS XR development train used the real-time operating system microkernel, so a large part of the IOS source code was re-written to take advantage of the features offered by the kernel. In 2005 Cisco introduced the Cisco IOS XR network operating system on the 12000 series of network routers, extending the microkernel architecture from the CRS-1 routers to Cisco's widely deployed core routers. In 2006 Cisco introduced IOS Software Modularity, which extends the microkernel architecture into the IOS environment, while still providing the software upgrade capabilities.