Cissoid of Diocles


In geometry, the cissoid of Diocles is a cubic plane curve notable for the property that it can be used to construct two mean proportionals to a given ratio. In particular, it can be used to double a cube. It can be defined as the cissoid of a circle and a line tangent to it with respect to the point on the circle opposite to the point of tangency. In fact, the curve family of cissoids is named for this example and some authors refer to it simply as the cissoid. It has a single cusp at the pole, and is symmetric about the diameter of the circle which is the line of tangency of the cusp. The line is an asymptote. It is a member of the conchoid of de Sluze family of curves and in form it resembles a tractrix.
The word "cissoid" comes from the Greek κισσοειδής kissoeidēs "ivy shaped" from κισσός kissos "ivy" and -οειδής -oeidēs "having the likeness of". The curve is named for Diocles who studied it in the 2nd century BCE.

Construction and equations

Let the radius of C be a. By translation and rotation, we may take O to be the origin and the center of the circle to be, so A is. Then the polar equations of L and C are:
By construction, the distance from the origin to a point on the cissoid is equal to the difference between the distances between the origin and the corresponding points on L and C. In other words, the polar equation of the cissoid is
Applying some trigonometric identities, this is equivalent to
Let in the above equation. Then
are parametric equations for the cissoid.
Converting the polar form to Cartesian coordinates produces

Construction by double projection

A compass-and-straightedge construction of various points on the cissoid proceeds as follows. Given a line L and a point O not on L, construct the line L' through O parallel to L. Choose a variable point P on L, and construct Q, the orthogonal projection of P on L', then R, the orthogonal projection of Q on OP. Then the cissoid is the locus of points R.
To see this, let O be the origin and L the line x = 2a as above. Let P be the point ; then Q is and the equation of the line OP is y=tx. The line through Q perpendicular to OP is
To find the point of intersection R, set y = tx in this equation to get
which are the parametric equations given above.
While this construction produces arbitrarily many points on the cissoid, it cannot trace any continuous segment of the curve.

Newton's construction

The following construction was given by Isaac Newton. Let J be a line and B a point not on J. Let BST be a right angle which moves so that ST equals the distance from B to J and T remains on J, while the other leg BS slides along B. Then the midpoint P of ST describes the curve.
To see this, let the distance between B and J be 2a. By translation and rotation, take B = and J the line x=a. Let P = and let ψ be the angle between SB and the x-axis; this is equal to the angle between ST and J. By construction, PT = a, so the distance from P to J is a sin ψ. In other words a-x = a sin ψ. Also, SP = a is the y coordinate of if it is rotated by angle ψ, so
a = sin ψ + y cos ψ. After simplification, this produces parametric equations
Change parameters by replacing ψ with its complement to get
or, applying double angle formulas,
But this is polar equation
given above with θ=Ψ/2.
Note that, as with the double projection construction, this can be adapted to produce a mechanical device that generates the curve.

Delian problem

The Greek geometer Diocles used the cissoid to obtain two mean proportionals to a given ratio. This means that given lengths a and b, the curve can be used to find u and v so that a is to u as u is to v as v is to b i.e.
a/u=u/v=v/b, as discovered by Hippocrates of Chios. As a special case, this can be used to solve the Delian problem: how much must the length of a cube be increased in order to double its volume? Specifically, if a is the side of a cube, and b=2a, then the volume of a cube of side u is
so u is the side of a cube with double the volume of the original cube. Note however that this solution does not fall within the rules of compass and straightedge construction since it relies on the existence of the cissoid.
Let a and b be given. It is required to find u so that u3=a2b, giving u and v=u2/a as the mean proportionals. Let the cissoid
be constructed as above, with O the origin, A the point, and J the line x=a, also as given above. Let C be the point of intersection of J with OA. From the given length b, mark B on J so that CB=b. Draw BA and let P = be the point where it intersects the cissoid. Draw OP and let it intersect J at U. Then u=CU is the required length.
To see this, rewrite the equation of the curve as
and let N =, so PN is the perpendicular to OA through P.
From the equation of the curve,
From this,
By similar triangles PN/ON=UC/OC and PN/NA=BC/CA. So the equation becomes
so
as required.
Diocles did not really solve the Delian problem. The reason is that the cissoid of Diocles cannot be constructed perfectly, at least not with compass and straightedge. To construct the cissoid of Diocles, one would construct a finite number of its individual points, then connect all these points to form a curve. The problem is that there is no well-defined way to connect the points. If they are connected by line segments, then the construction will be well-defined, but it will not be an exact cissoid of Diocles, but only an approximation. Likewise, if the dots are connected with circular arcs, the construction will be well-defined, but incorrect. Or one could simply draw a curve directly, trying to eyeball the shape of the curve, but the result would only be imprecise guesswork.
Once the finite set of points on the cissoid have been drawn, then line PC will probably not intersect one of these points exactly, but will pass between them, intersecting the cissoid of Diocles at some point whose exact location has not been constructed, but has only been approximated. An alternative is to keep adding constructed points to the cissoid which get closer and closer to the intersection with line PC, but the number of steps may very well be infinite, and the Greeks did not recognize approximations as limits of infinite steps.
One could also construct a cissoid of Diocles by means of a mechanical tool specially designed for that purpose, but this violates the rule of only using compass and straightedge. This rule was established for reasons of logical — axiomatic — consistency. Allowing construction by new tools would be like adding new axioms, but axioms are supposed to be simple and self-evident, but such tools are not. So by the rules of classical, synthetic geometry, Diocles did not solve the Delian problem, which actually can not be solved by such means.
On the other hand, if one accepts that cissoids of Diocles do exist, then there must exist at least one example of such a cissoid. This cissoid could then be translated, rotated, and expanded or contracted in size at will to fit into any position. Then one would readily admit that such a cissoid can be used to correctly solve the Delian problem.

As a pedal curve

The pedal curve of a parabola with respect to its vertex is a cissoid of Diocles. The geometrical properties of pedal curves in general produce several alternate methods of constructing the cissoid. It is the envelopes of circles whose centers lie on a parabola and which pass through the vertex of the parabola. Also, if two congruent parabolas are set vertex-to-vertex and one is rolled along the other; the vertex of the rolling parabola will trace the cissoid.

Inversion

The cissoid of Diocles can also be defined as the inverse curve of a parabola with the center of inversion at the vertex. To see this, take the parabola to be x = y2, in polar coordinate or:
The inverse curve is thus:
which agrees with the polar equation of the cissoid above.