Citroën C15


The Citroën C15 is a panel van produced by the French manufacturer Citroën from late 1984 until 2005. It was the successor to the Citroën Acadiane, which had replaced the Citroën 2CV vans that pioneered the box van format from the 1950s to the 1970s, although the Acadiane continued in production alongside the C15 initially. The name refers to the car's French gross vehicle weight rating and indicates its position beneath the C25 and C35 in Citroën's commercial vehicle range at the time.

Design

The C15 was based on the Citroën Visa, and mainly used a 1769 cc XUD or 1868 cc, naturally aspirated diesel engine. Until the early 1990s, it was also available with a petrol PSA TU engine. At the time of introduction, the engines were the XUD or the 1124 cc petrol TU1. The diesel engines also powered vehicles several classes larger. Both Bosch and Lucas/CAV/Roto diesel injection systems were used. The TU petrol-engined versions were sold until the beginning of the 1990s. The engines and drivetrains were taken from the Citroën Visa lineup.
While the car was mostly the same as a regular Citroën Visa ahead of the B-pillar, the cargo area was unique. The C15 had a lengthened wheelbase, and a sturdier rear axle shared with the Peugeot 305 Break and Citroën BX since it had to carry heavier loads than the Visa. The very curved sides of the windscreen, enabled the use of a very large single wiper on the long narrow windscreen, without it catching the windscreen seal. The shape of the bumper and plastic trim on the front of the van, like those of the Visa car, were designed to aerodynamically reduce the deposition of dirt on the headlights, and to reduce the risk of stone chips to the headlights, bonnet and windscreen.
The heating and ventilation system,, could provide cold air from fascia side vents, to the face while warming the car. The central directable fascia vents could be pointed directly at the windscreen in front of the driver, to blow hot air to keep it clear in extreme misting conditions. There was also an additional mid-level vent. The C15 also had height adjustable halogen headlights, and multi speed/intermittent front wipers, which was better than most commercial vehicles of the time.
As well as standard van configuration, the vehicle later became available with rear side windows and a rear seat,, which can be seen as a forerunner to today's compact utility vehicles such as the Ford Transit Connect, Opel/Vauxhall Combo, Citroën Berlingo and Peugeot Partner. The C15 was also available without the rear bodywork, as a chassis only model. This encouraged various conversions such as the campervan called the RomaHome built by British company Island Plastics. This small camper was suitable for two people. Rare pickup truck versions were also made.
By 2005, when it was discontinued, production had reached 1,181,471. The last three built were given to:
The original Visa was built for about ten years, but the C15 had a twenty-one-year production run. During that time there were various minor changes and upgrades made. Models with 600 kg and 800 kg load capacities were introduced. Trim details were changed to give it a facelift in September 1989, when a lower grille with three cross bars was introduced, with the turn signals now mounted in the bumper and with an offset Citroën logo. In 1992, side plastic trims were added, and the bonnet trim again changed somewhat.

Variants and history

The C15 was introduced in the United Kingdom in 1985, initially badged with the pun 'van blanc' or 'van rouge' according to body colour. Models for the United Kingdom were always shipped without rear side windows, as is usual for vans in Britain, due to tax regulations. European models had side windows, and a combi version called Weekend, with an easily removed rear bench seat. There was also, in France at least, a rather rare stretched version, which was about 0.5 meters longer than a normal C15.
Early models had a single wide rear door, but this was awkward for loading in a tight space and prone to sagging or to snapping off in a high wind, so, after a year or two, only conventional two door versions were sold with fold back hinges.
Numerous changes were made to the engine ancillaries over the years. Early diesel-engined models had an inline electrical fuel heater, which invariably stopped working after a couple of years. Later models instead had the fuel pass over the thermostat housing to warm it up instead.
The fuel filter moved from the wing to the top of the thermostat housing. The oil filler moved from the crankcase cover to the dipstick housing. The front indicators were originally combined with the headlights, but later replaced by side lights and separate indicators were fitted in the bumper.