Compaction of ceramic powders is a specific forming technique for ceramics. It is a process in which ceramic granular materials are made cohesive through mechanical densification, involving or not temperature exposition. The process permits an efficient production of parts ranging widely in size and shape to close tolerances with low drying shrinkage. Traditional and structural ceramics are produced. Cold compaction of ceramic powders ends up with the realization of the so-called green piece, which is later subject to sintering.
The background: traditional & advanced ceramics
industry is broadly developed in the world, so much so that only in Europe the current investment is estimated at € 26 billion. Advanced ceramics are crucial for new technologies, particularly thermo-mechanical and bio-medical applications, while traditional ceramics have a worldwide market and have been suggested as materials to minimize the impact on the environment.
Up-to-date ceramic technology involves invention and design of new components and optimization of production processes of complex structures. Ceramics can be formed by a variety of different methods which can be divided into three main groups, depending on whether the starting materials involve a gas, a liquid, or a solid. Examples of methods involving gases are: chemical vapour deposition, directed metal oxidation and reaction bonding. Examples of methods involving liquids are: sol-gel process and polymer pyrolysis. Methods involving solids, especially powder methods, dominate ceramic forming and are extensively used in the industry. The practical realization of ceramic products by powder methods requires the following steps: ceramic powder production, powder treatment, handling and processing, cold forming, sintering, and evaluation of the performance of the final product. Since these processes permit an efficient production of parts ranging widely in size and shape to close tolerances, there is an evident interest in industry. For instance, metallurgical, pharmaceutical, and traditional and advanced structural ceramics represent common applications.
Mechanics of forming of ceramic powders
It is a well-established fact that the performance of a ceramic component critically depends on the manufacturing process. Initial powder characteristics and processing, including cold forming and sintering, have a strong impact on the mechanical properties of the components as they may generate a defect population within the green and sintered compounds. The mechanical characteristics of the solid obtained after cold forming strongly affect the subsequent sintering process and thus the mechanical properties of the final piece. Many technical, still unresolved difficulties arise in the forming process of ceramic materials. On the one hand the compact should result to be intact after ejection, it should be handleable without failure and essentially free of macro defects. On the other hand, defects of various nature are always present in the green bodies, negatively affecting local shrinkage during sintering, Fig. 1. Defects can be caused by the densification process, which may involve highly inhomogeneous strain fields, or by mold ejection. Currently, there is a high production rejection rate, due to the fact that manufacturing technologies are mainly based on empirically engineered processes, rather than on rational and scientific methodologies. The industrial technologies involved in the production of ceramics, with particular reference to tile and sanitaryware products, generate a huge amount of waste of material and energy. Consequently, the set-up of manufacturing processes is very costly and time consuming and not yet optimal in terms of quality of the final piece. There is therefore a strong interest from the ceramic industry in the availability of tools capable of modelling and simulating: i) the powder compaction process and ii) the criticality of defects possibly present in the final piece after sintering. Recently, an EU IAPP research project has been financed with the aim of enhance mechanical modelling of ceramic forming in view of industrial applications. During cold powder compaction, a granular material is made cohesive through mechanical densification, a process for which modelling requires the description of the transition from a granular to a dense and even a fully dense state. Since granular materials are characterized by mechanical properties almost completely different from those typical of dense solids, the mechanical modelling must describe a transition between two distinctly different states of a material. This is a scientific challenge addressed by Piccolroaz et al. in terms of plasticity theory. A key point in their analysis is the use of the ‘Bigoni & Piccolroaz yield surface’, previously developed, see Fig. 3. The mechanical model developed by Piccoloraz et al. permits the description of the forming process. The INTERCER2 research project is aimed to develop novel constitutive descriptions for ceramic powders and more robust implementation in a numerical code.
