Conway polyhedron notation


In geometry, Conway polyhedron notation, invented by John Horton Conway and promoted by George W. Hart, is used to describe polyhedra based on a seed polyhedron modified by various prefix operations.
Conway and Hart extended the idea of using operators, like truncation as defined by Kepler, to build related polyhedra of the same symmetry. For example, tC represents a truncated cube, and taC, parsed as, is a truncated cuboctahedron. The simplest operator dual swaps vertex and face elements; e.g., a dual cube is an octahedron: dC=O. Applied in a series, these operators allow many higher order polyhedra to be generated. Conway defined the operators abdegjkmost, while Hart added r and p. Later implementations named further operators, sometimes referred to as "extended" operators. Conway's basic operations are sufficient to generate the Archimedean and Catalan solids from the Platonic solids. Some basic operations can be made as composites of others: for instance, ambo applied twice is the expand operation: aa = e, while a truncation after ambo produces bevel: ta = b.
Polyhedra can be studied topologically, in terms of how their vertices, edges, and faces connect together, or geometrically, in terms of the placement of those elements in space. Different implementations of these operators may create polyhedra that are geometrically different but topologically equivalent. These topologically equivalent polyhedra can be thought of as one of many embeddings of a polyhedral graph on the sphere. Unless otherwise specified, in this article topology is the primary concern. Polyhedra with genus 0 are often put into canonical form to avoid ambiguity.

Operators

In Conway's notation, operations on polyhedra are applied like functions, from right to left. For example, a cuboctahedron is an ambo cube, i.e., and a truncated cuboctahedron is. Repeated application of an operator can be denoted with an exponent: j2 = o. In general, Conway operators are not commutative.
Individual operators can be visualized in terms of fundamental domains, as below. Each right triangle is a fundamental domain. Each white chamber is a rotated version of the others, and so is each colored chamber. For achiral operators, the colored chambers are a reflection of the white chambers, and all are transitive. In group terms, achiral operators correspond to dihedral groups where n is the number of sides of a face, while chiral operators correspond to cyclic groups lacking the reflective symmetry of the dihedral groups. Achiral and chiral operators are also called local symmetry-preserving operations and local operations that preserve orientation-preserving symmetries, respectively.
LSPs should be understood as local operations that preserve symmetry, not operations that preserve local symmetry. Again, these are symmetries in a topological sense, not a geometric sense: the exact angles and edge lengths may differ.
Hart introduced the reflection operator r, that gives the mirror image of the polyhedron. This is not strictly a LOPSP, since it does not preserve orientation: it reverses it, by exchanging white and red chambers. r has no effect on achiral polyhedra aside from orientation, and rr = S returns the original polyhedron. An overline can be used to indicate the other chiral form of an operator: = rsr.
An operation is irreducible if it cannot be expressed as a composition of operators aside from d and r. The majority of Conway's original operators are irreducible: the exceptions are e, b, o, and m.

Matrix representation

The relationship between the number of vertices, edges, and faces of the seed and the polyhedron created by the operations listed in this article can be expressed as a matrix. When x is the operator, are the vertices, edges, and faces of the seed, and are the vertices, edges, and faces of the result, then
The matrix for the composition of two operators is just the product of the matrixes for the two operators. Distinct operators may have the same matrix, for example, p and l. The edge count of the result is an integer multiple d of that of the seed: this is called the inflation rate, or the edge factor.
The simplest operators, the identity operator S and the dual operator d, have simple matrix forms:
Two dual operators cancel out; dd = S, and the square of is the identity matrix. When applied to other operators, the dual operator corresponds to horizontal and vertical reflections of the matrix. Operators can be grouped into groups of four by identifying the operators x, xd, dx, and dxd. In this article, only the matrix for x is given, since the others are simple reflections.

Number of operators

The number of LSPs for each inflation rate is starting with inflation rate 1. However, not all LSPs necessarily produce a polyhedron whose edges and vertices form a with a 3-connected graph, and as a consequence of Steinitz's theorem do not necessarily produce a convex polyhedron from a convex seed. The number of 3-connected LSPs for each inflation rate is.

Original operations

Strictly, seed, needle, and zip were not included by Conway, but they are related to original Conway operations by duality so are included here.
From here on, operations are visualized on cube seeds, drawn on the surface of that cube. Blue faces cross edges of the seed, and pink faces lie over vertices of the seed. There is some flexibility in the exact placement of vertices, especially with chiral operators.

Seeds

Any polyhedron can serve as a seed, as long as the operations can be executed on it. Common seeds have been assigned a letter.
The Platonic solids are represented by the first letter of their name ; the prisms for n-gonal forms; antiprisms ; cupolae ; anticupolae ; and pyramids. Any Johnson solid can be referenced as Jn, for n=1..92.
All of the five regular polyhedra can be generated from prismatic generators with zero to two operators:
The regular Euclidean tilings can also be used as seeds:
These are operations created after Conway's original set. Note that many more operations exist than have been named; just because an operation is not here does not mean it does not exist. To simplify, only irreducible operators are
included in this list: others can be created by composing operators together.

Indexed extended operations

A number of operators can be grouped together by some criteria, or have their behavior modified by an index. These are written as an operator with a subscript: xn.

Augmentation

operations retain original edges. They may be applied to any independent subset of faces, or may be converted into a join-form by removing the original edges. Conway notation supports an optional index to these operators: 0 for the join-form, or 3 or higher for how many sides affected faces have. For example, k4Y4=O: taking a square-based pyramid and gluing another pyramid to the square base gives an octahedron.
OperatorklLK
x
x0
k0 = j
l0 = c
L0
K0 = jk
AugmentationPyramidPrismAntiprism

The truncate operator t also has an index form tn, indicating that only vertices of a certain degree are truncated. It is equivalent to dknd.
Some of the extended operators can be created in special cases with kn and tn operators. For example, a chamfered cube, cC, can be constructed as t4daC, as a rhombic dodecahedron, daC or jC, with its degree-4 vertices truncated. A lofted cube, lC is the same as t4kC. A quinto-dodecahedron, qD can be constructed as t5daaD or t5deD or t5oD, a deltoidal hexecontahedron, deD or oD, with its degree-5 vertices truncated.

Meta/Bevel

Meta adds vertices at the center and along the edges, while bevel adds faces at the center, seed vertices, and along the edges. The index is how many vertices or faces are added along the edges. Meta is also called cantitruncation or omnitruncation. Note that 0 here does not mean the same as for augmentation operations: it means zero vertices are added along the edges.

Medial

Medial is like meta, except it does not add edges from the center to each seed vertex. The index 1 form is identical to Conway's ortho and expand operators: expand is also called cantellation and expansion. Note that o and e have their own indexed forms, described below. Also note that some implementations start indexing at 0 instead of 1.

Goldberg-Coxeter

The Goldberg-Coxeter Conway operators are two infinite families of operators that are an extension of the Goldberg-Coxeter construction. The GC construction can be thought of as taking a triangular section of a triangular lattice, or a square section of a square lattice, and laying that over each face of the polyhedron. This construction can be extended to any face by identifying the chambers of the triangle or square. Operators in the triangular family can be used to produce the Goldberg polyhedra and geodesic polyhedra: see List of geodesic polyhedra and Goldberg polyhedra for formulas.
The two families are the triangular GC family, ca,b and ua,b, and the quadrilateral GC family, ea,b and oa,b. Both the GC families are indexed by two integers and. They possess many nice qualities:
The operators are divided into three classes :
Of the original Conway operations, the only ones that do not fall into the GC family are g and s. Meta and bevel can be expressed in terms of one operator from the triangular family and one from the quadrilateral family.

Triangular

By basic number theory, for any values of a and b,.

Quadrilateral

Examples

See also List of geodesic polyhedra and Goldberg polyhedra.

Archimedean and Catalan solids

Conway's original set of operators can create all of the Archimedean solids and Catalan solids, using the Platonic solids as seeds.

Composite operators

The truncated icosahedron, tI = zD, can be used as a seed to create some more visually-pleasing polyhedra, although these are neither vertex nor face-transitive.

Other surfaces

;On the plane:
Each of the convex uniform tilings can be created by applying Conway operators to the regular tilings Q, H, and Δ.
;On the torus:
Conway operators can also be applied to toroidal polyhedra and polyhedra with multiple holes.