Cruise control


Cruise control is a system that automatically controls the speed of a motor vehicle. The system is a servomechanism that takes over the throttle of the car to maintain a steady speed as set by the driver.

History

Speed control was used in automobiles as early as 1900 in the Wilson-Pilcher and also in the 1910s by Peerless. Peerless advertised that their system would "maintain speed whether up hill or down". The technology was adopted by James Watt and Matthew Boulton in 1788 to control steam engines, but the use of governors dates at least back to the 17th century. On an engine the governor adjusts the throttle position as the speed of the engine changes with different loads, so as to maintain a near constant speed.
Modern cruise control was invented in 1948 by the inventor and mechanical engineer Ralph Teetor. His idea was ostensibly borne out of the frustration of riding in a car driven by his lawyer, who kept speeding up and slowing down as he talked. More significant factor in developing this device was the speed limit imposed across the US during World War II to save on gasoline use and reduce tire wear. A mechanism controlled by the driver provided resistance to further pressure on the accelerator pedal when the vehicle reaching the desired speed. Teetor's idea of a dashboard speed selector with a mechanism connected to the drive shaft and a device able to push against the gas pedal was patented in 1950. He added a speed lock capability that would maintain the car's speed until the driver tapped the brake pedal or turned off the system.
The first car with Teetor's "Speedostat" system was the 1958 Imperial using a speed dial on the dashboard. This system calculated ground speed based on driveshaft rotations off the rotating speedometer-cable, and used a bi-directional screw-drive electric motor to vary throttle position as needed. It was Cadillac Division that re-named the "Speedostat" and marketed the device as "Cruise Control."
A 1955 U.S. Patent for a "Constant Speed Regulator" was filed in 1950 by M-Sgt Frank J. Riley. He installed his invention, which he conceived while driving on the Pennsylvania Turnpike, on his own car in 1948. Another inventor named Harold Exline, working independently of Riley, also invented a type of cruise control, which he first installed on his own car and on cars belonging to friends of his. Exline filed a U.S. Patent for "Vacuum Powered Throttle Control With Electrically Controlled Air Valve" in 1951, and the Patent was granted in 1956. Despite these patents, Riley, Exline, and the subsequent patent holders were not able to collect royalties for any of the inventions using cruise control.
In 1965, American Motors Corporation introduced a low-priced automatic speed control for its large-sized cars with automatic transmissions. The AMC "Cruise-Command" unit was engaged by a push-button once the desired speed was reached and then the throttle position was adjusted by a vacuum control directly from the speedometer cable rather than a separate dial on the dashboard.
Daniel Aaron Wisner invented "Automotive Electronic Cruise Control" in 1968 as an engineer for RCA's Industrial and Automation Systems Division in Plymouth, Michigan. His invention described in two patents filed that year, with the second modifying his original design by debuting digital memory, was the first electronic device in controlling a car. Two decades passed before an integrated circuit for his design was developed by Motorola as the MC14460 Automotive Speed Control Processor in CMOS. The advantage of electronic speed control over its mechanical predecessor was that it could be integrated with electronic accident avoidance and engine management systems.
Following the 1973 oil crisis and rising fuel prices, the device became more popular in the U.S. "Cruise control can save gas by avoiding surges that expel fuel" while driving at steady speeds. In 1974, AMC, GM, and Chrysler priced the option at $60 to $70, while Ford charged $103.

Operation

The driver must bring the vehicle up to speed manually and use a button to set the cruise control to the current speed.
The cruise control takes its speed signal from a rotating driveshaft, speedometer cable, wheel speed sensor from the engine's RPM, or from internal speed pulses produced electronically by the vehicle. Most systems do not allow the use of the cruise control below a certain speed - typically around. The vehicle will maintain the desired speed by pulling the throttle cable with a solenoid, a vacuum driven servomechanism, or by using the electronic systems built into the vehicle if it uses a 'drive-by-wire' system.
All cruise control systems must be capable of being turned off both explicitly and automatically when the driver depresses the brake, and often also the clutch. Cruise control often includes a memory feature to resume the set speed after braking, and a coast feature to reduce the set speed without braking. When the cruise control is engaged, the throttle can still be used to accelerate the car, but once the pedal is released the car will then slow down until it reaches the previously set speed.
On the latest vehicles fitted with electronic throttle control, cruise control can be easily integrated into the vehicle's engine management system. Modern "adaptive" systems include the ability to automatically reduce speed when the distance to a car in front, or the speed limit, decreases. This is an advantage for those driving in unfamiliar areas.
The cruise control systems of some vehicles incorporate a "speed limiter" function, which will not allow the vehicle to accelerate beyond a pre-set maximum; this can usually be overridden by fully depressing the accelerator pedal.
On vehicles with a manual transmission, cruise control is less flexible because the act of depressing the clutch pedal and shifting gears usually disengages the cruise control. The "resume" feature has to be used each time after selecting the new gear and releasing the clutch. Therefore, cruise control is of most benefit at motorway/highway speeds when top gear is used virtually all the time.

Advantages and disadvantages

Some advantages of cruise control include:
However, when used incorrectly cruise control can lead to accidents due to several factors, such as:
Some modern vehicles have systems for adaptive cruise control, which is a general term meaning improved cruise control. These improvements can be automatic braking or dynamic set-speed type controls.
Automatic Braking Type: the automatic braking type use either a single or combination of sensors to allow the vehicle to keep pace with the car it is following, slow when closing in on the vehicle in front and accelerating again to the preset speed when traffic allows. Some systems also feature forward collision warning systems, which warn the driver if a vehicle in front—given the speed of both vehicles—gets too close.
Dynamic Set Speed Type: The dynamic set speed uses the GPS position of speed limit signs, from a database. Some are modifiable by the driver.
Non-Braking Type: The speed can be adjusted to allow traffic calming.
Dynamic radar cruise control: uses a camera and millimeter-wave radar to maintain a set point distance from vehicles in front of the car; the system will automatically slow down or speed up based on the vehicles in front.
Vehicles with adaptive cruise control are considered a Level 1 autonomous car, as defined by SAE International.