DOCSIS Set-top Gateway


DOCSIS Set-top Gateway is a specification describing how out-of-band data is delivered to a cable set-top box. Cable set-top boxes need a reliable source of out of band data for information such as program guides, channel lineups, and updated code images.

Features

DSG is an extension of the DOCSIS protocol governing cable modems, and applies to all versions of DOCSIS.
The principal features of DSG are:

One-way operation

The original DOCSIS protocol supports only two way connectivity. A cable modem that is unable to acquire an upstream channel will give up and resume scanning for new channels. Likewise, persistent upstream errors will cause a cable modem to "reinitialize its MAC" and scan for new downstream channels. This behavior is appropriate for traditional cable modems, but not for cable set-top boxes. A cable set-top box still needs to acquire its out of band data even if the upstream channel is impaired.
The DSG specification introduced one way modes of operation. When upstream errors occur, the set-top enters a downstream-only state, periodically attempting to reacquire the upstream channel.

Defining how to recognize the correct downstream channel

Set-top out of band data is generally present only on certain downstream channels. The set-top needs a way to distinguish a valid downstream from an invalid one used only by standalone cable modems.
The DSG specification defines a special downstream keep-alive message so that the set-top can recognize an appropriate downstream channel.

Addition of new OSSI events

The DSG Specification extends the DOCSIS Open Source Software Institute error reporting and logging mechanism, adding standardized events pertaining to DSG operation.

Creating an out-of-band directory

The Advanced Mode of the DSG Specification introduces a special MAC Management message called the Downstream Channel Descriptor. The DCD provides a directory identifying the MAC and IP parameters associated with the out of band data streams.
Each data consumer is assigned a special Client Identifier that names the out of band data stream in the DCD.

SNMP MIBs

The DSG Specification creates two new SNMP management information bases to manage DSG devices. One MIB is used by the set-top, the other by the cable modem termination system.

Architecture

A DSG network comprises three components. The Conditional Access Server generates a stream of out of band data. The DSG Agent forwards the out of band data and publishes the out of band directory. The DSG client on the set-top digests the DSG data.
The set-top device comprises three subcomponents. The DSG-capable cable modem is referred to as the DSG eCM. A data consumer is called a DSG Client Finally, the eCM is configured and controlled by a component called the DSG Client Controller.