Daimler Reitwagen
The Daimler Petroleum Reitwagen or Einspur was a motor vehicle made by Gottlieb Daimler and Wilhelm Maybach in 1885. It is widely recognized as the first motorcycle. Daimler is often called "the father of the motorcycle" for this invention. Even when the three steam powered two wheelers that preceded the Reitwagen, the Michaux-Perreaux and Roper of 1867-1869, and the 1884 Copeland, are considered motorcycles, it remains nonetheless the first petrol internal combustion motorcycle, and the forerunner of all vehicles, land, sea and air, that use its overwhelmingly popular engine type.
First motorcycle?
The Reitwagens status as the first motorcycle rests on whether the definition of motorcycle includes having an internal combustion engine. The Oxford English Dictionary uses this criterion. Even by that definition, the use of four wheels instead of two raises doubts. If the outriggers are accepted as auxiliary stabilizers, they point to a deeper issue in bicycle and motorcycle dynamics, in that Daimler's testbed needed the training wheels because it did not employ the then well-understood principles of rake and trail. For this and other reasons motoring author David Burgess-Wise called the Daimler-Maybach "a crude makeshift", saying that "as a bicycle, it was 20 years out of date." Cycle World's Technical Editor Kevin Cameron, however, maintains that steam power was a dead end and the Reitwagen was the first motorcycle because it hit upon the successful engine type, saying, "History follows things that succeed, not things that fail."Enrico Bernardi's 1882 one-cylinder petrol-engined tricycle, the Motrice Pia, is considered by a few sources as the first gasoline internal combustion motorcycle, and in fact the first ever internal combustion vehicle. The Motrice Pia is not mentioned in any mainstream sources. While there is some discussion in mainstream sources of the merits of Michaux-Perreaux steam velocipede or Roper steam velocipede versus the Reitwagen, there is no debate that considers the merits of the Motrice Pia.
Development
Gottlieb Daimler visited Paris in 1861 and spent time observing the first internal combustion engine developed by Etienne Lenoir. This experience would be helpful later when he joined Nikolaus August Otto's company N.A. Otto & Cie.In 1872 Gottlieb Daimler had become the director of N.A. Otto & Cie the world's largest engine manufacturer. Otto's company had created the first successful gaseous fuel engine in 1864 and in 1876 finally succeeded in creating a compressed charge gaseous petroleum engine due to the direction of Daimler and his plant engineer Wilhelm Maybach. Because of this success Otto's company name was changed to Gasmotoren Fabrik Deutz the next year when the plant was moved.
Otto had no interest in making engines small enough to be used in transportation. After some dispute over the direction design of the engines should take Daimler left Deutz and took Maybach with him. Together they moved to the town Cannstatt where they began work on a "high speed explosion engine." This goal was achieved in 1883 with the development of their first engine, a horizontal cylinder engine that ran on Petroleum Naptha. The Otto engines were incapable of running at speeds much higher than 150 to 200 rpm and were not designed to be throttled. Daimler's goal was to build an engine small enough that it could be used to power a wide range of transportation equipment with a minimum rotation speed of 600 rpm. This was realized with the 1883 engine. The next year Daimler and Maybach developed a vertical cylinder model which is called the Grandfather Clock engine and achieved 700 rpm and soon 900 rpm was achieved. This was made possible by the Hot-Tube ignition which was developed by an Englishman named Watson. The electrical systems of that era were unreliable and too slow to allow those speeds.
Having achieved the goals of producing a throttling engine with high enough RPM that was small enough to be used in transportation Daimler and Maybach built the 1884 engine into a two-wheeled test frame which was patented as the "Petroleum Reitwagen". This test machine demonstrated the feasibility of a liquid petroleum engine which used a compressed fuel charge to power an automobile. Daimler is often referred to as the Father of the Automobile.
"The first motorcycle looks like an instrument of torture", wrote Melissa Holbrook Pierson, describing a vehicle that was created along the way to Daimler's real goal, a four-wheeled car, and earning him credit as the inventor of the motorcycle "malgré lui," in spite of himself.
Daimler had founded an experimental workshop in the garden shed behind his house in Cannstatt near Stuttgart in 1882. Together with his employee Maybach they developed a compact, high-speed single-cylinder engine, patented on April 3, 1885 and called "grandfather clock engine." It had a float metered carburetor, used mushroom intake valves which were opened by the suction of the piston's intake stroke, and instead of an electrical ignition system, it used hot tube ignition, a platinum tube running into the combustion chamber, heated by an external open flame. It could also run on coal gas. It used twin flywheels and had an aluminum crankcase.
Daimler's and Maybach's next step was to install the engine in a test bed to prove the viability of their engine in a vehicle. Their goal was to learn what the engine could do, and not to create a motorcycle; it was just that the engine prototype was not yet powerful enough for a full size carriage.
The original design of 1884 used a belt drive, and twist grip on the handlebars which applied the brake when turned one way and tensioned the drive belt, applying power to the wheel, when turned the other way. Roper's velocipede of the late 1860s used a similar two way twistgrip handlebar control. The plans also called for steering linkage shafts that made two right angle bends connected with gears, but the actual working model used a simple handlebar without the twist grip or gear linkage. The design was patented on August 29, 1885.
It had a single-cylinder Otto cycle four-stroke engine mounted on rubber blocks, with two iron tread wooden wheels and a pair of spring-loaded outrigger wheels to help it remain upright. Its engine output of at 600 rpm gave it a speed of about. Daimler's 17-year-old son, Paul, rode it first on November 18, 1885, going, from Cannstatt to Untertürkheim, Germany. The seat caught fire on that excursion, the engine's hot tube ignition being located directly underneath. Over the winter of 1885-1886 the belt drive was upgraded to a two-stage, two-speed transmission with a belt primary drive and the final drive using a ring gear on the back wheel. By 1886 the Reitwagen had served its purpose and was abandoned in favor of further development on four wheeled vehicles.