Dutchman (repair)


A dutchman, or for some uses, graving piece is a repair technique for replacing small sections of a damaged area. The term is used in woodworking, masonry, railroading, boatbuilding and theater.

Uses

Woodworking

In construction and woodworking, a dutchman can refer to an inset wood patch used to repair wood. Typically a square inset is cut into the damaged area and a new piece of wood is glued into the inset.

Masonry

In stone masonry, a Dutchman is an inset selectively replacing only the fault in a stone with new stone material, usually matching adjacent material as closely as possible.

Shipbuilding

In shipbuilding, boat-building and ship's carpentry, a dutchman repair can refer to repairs in metal as well as wood.

Railroading

In railroading, a dutchman is colloquially a short air brake extension hose or a temporary rail repair.
A rail repair dutchman is typically a long piece of rail that is cut in advance for the purpose and carried by a section crew. If the gang finds a rail with a chipped or broken end, they remove the connector plates, cut out the damaged section, replace it with the dutchman, and bolt the connectors back in place. This is often only a temporary repair.
When welding rails together using the Thermite process began at the start of the 20th century, a section of railhead approximately long, also called a dutchman, was often placed between the sections being joined, with only the web and foot of the rail being new Thermite steel.

Theater

The term is also used in theatrical scenery construction, where a dutchman is a strip of material, usually canvas or muslin, used to cover the joint between two adjoining surfaces. The strip is then painted or textured to match the adjoining pieces and create a seamless effect. Warp or weft threads can be removed from the edge of the dutchman to allow the edges to feather into the surrounding surface. On canvas flats, dutchman is usually applied with diluted white glue or paint.

Boilermaking

In the boiler industry, a Dutchman refers to the replacement section of tubing used to repair a tube failure.