Econet


Econet was Acorn Computers's low-cost local area network system, intended for use by schools and small businesses.
Econet software was mostly superseded by AUN, though some suppliers were still offering bridging kits to interconnect old and new networks. In turn, AUN was superseded by the Acorn Access+ software. Support for Econet was removed from the Linux kernel at version 3.5 in 2012, citing lack of use and privilege escalation vulnerabilities.

Implementation history

Econet was first developed for the Acorn Atom and Acorn System 2/3/4 computers in 1981. Also in that year the BBC Microcomputer was released, initially with provision for floppy disc and Econet interfaces but without the necessary hardware fitted, intended to be supplied as future upgrades.
In 1982, the Tasmania Department of Education requested a tender for the supply of personal computers to their schools. Earlier that year Barson Computers, Acorn's Australian computer distributor, had released the BBC Microcomputer with floppy disc storage as part of a bundle. Acorn's Hermann Hauser and Chris Curry agreed to allow it to be also offered with Econet fitted, as they had previously done with the disc interface. As previously with the Disc Filing System, they stipulated that Barson would need to adapt the network filing system from the System 2 without assistance from Acorn. Barson's engineers applied a few modifications to fix bugs on the early BBC Micro motherboards, which were adopted by Acorn in later releases. With both floppy disc and networking available, the BBC Micro was approved for use in schools by all state and territory education authorities in Australia and New Zealand, and quickly overtook the Apple II as the computer of choice in private schools.
With no other supporting documentation available, the head of Barson's Acorn division, Rob Napier, published Networking with the BBC Microcomputer,
the first reference documentation for Econet.
Econet was officially released for the BBC Micro in the UK in 1984, and it later became popular as a networking system for the Acorn Archimedes. Econet was eventually supported on all post-Atom Acorn machines, apart from the Electron, the A3010, and the eventually-cancelled Phoebe 2100.
Econet was supported by Acorn MOS, RISC OS and RISC iX. Acorn once received an offer from Commodore International to license the technology, which it refused.
An "Ecolink" ISA interface card for IBM-compatible PCs
was available.
It used Microsoft's MS-NET Redirector for MS-DOS to provide file and printer sharing via the NET USE command.

Subsequent development

With the falling prices and widespread adoption of IP networking in the early 1990s, Acorn Universal Networking, an implementation of Econet protocols and addressing over TCP/IP, was developed to provide legacy support for Econet on Ethernet-connected machines.
The Econet protocol and AUN were also supported by the Linux kernel.

Supported systems

Econet was supported by a large number of different computer and server systems, produced both by Acorn and by other companies. As well as Acorn's MOS and RISC OS these also used other operating systems such as CP/M, DR-DOS, Unix or Microsoft Windows.
The Econet API includes an Econet_MachinePeek command, which can be used by software to determine if a machine is present on the network and its hardware platform. The machine-type codes which can be returned by that command
are a useful indication of the range of hardware that offered Econet as their primary networking function or as an option:
CodeMachine type
&0000Reserved
&0001Acorn BBC Micro Computer
&0002Acorn Atom
&0003Acorn System 3 or System 4
&0004Acorn System 5
&0005Acorn Master 128
&0006Acorn Electron
&0007Acorn Archimedes
&0008Reserved for Acorn
&0009Acorn Communicator
&000AAcorn Master 128 Compact Econet Terminal
&000BAcorn Filestore
&000CAcorn Master 128 Compact
&000DAcorn Ecolink card for Personal Computers
&000EAcorn Unix Workstation
&000F to &FFF9Reserved
&FFFASCSI Interface
&FFFBSJ Research IBM PC Econet interface
&FFFCNascom 2
&FFFDResearch Machines 480Z
&FFFESJ Research File Server
&FFFFZ80 CP/M

The manual includes an assembly language program to report a machine type, software version and release numbers.
An update to the list in volume 5A of the PRM
lists the following additions to the table above:
CodeMachine type
&000FRISC PC architecture
&0010 to &FFF7Reserved
&FFF8SJ Research GP server
&FFF9SJ Research 80386 UNIX

Physical and data-link layers

Econet is a five-wire bus network. One pair of wires is used for the clock, one pair for data, and one wire as a common ground. Signalling used the RS-422 5-volt differential standard, with one bit transferred per clock cycle. Unshielded cable was used for short lengths, and shielded cable for longer networks. The cable was terminated at each end to prevent reflections and to guarantee high logic levels when the bus was undriven.
The original connectors were five-pin circular 180° DIN types. On later 32-bit machines, the Econet connection was made via five of the pins on their 15-pin D-type Network port, which could also accept MAUs to allow other types of network to be connected via the same socket. This port looks similar to an AUI port, but is not compatible.
Each Econet interface was controlled by a Motorola MC68B54 Advanced Data Link Controller chip, which handled electrical transmission/reception, frame checksumming and collision detection.

Network and transport layers

Econet used a connectionless transmission model, similar to the current UDP, with no checksumming or error correction at this layer. Each packet had a four byte header consisting of:
  1. The destination station number
  2. The destination network number
  3. The source station number
  4. The source network number
A single data transmission consisted of four frames, each with a header as above:
  1. The sending station sends a scout packet with a port number and a flag byte
  2. The addressed receiving station returns a scout acknowledge to the sender
  3. The sending station sends the data
  4. The receiving station finishes with a final acknowledge, identical to the scout acknowledge
There was provision for broadcast transmissions, a single frame sent with its destination station and network numbers set to 255. There was also provision for promiscuous mode reception, termed wild receive
in the PRM, requested by listening for station and network numbers both being zero.
Technical details of packets and frames, the Econet API, and worked examples in ARM assembler and BBC BASIC
are given in the RISC OS Programmer's Reference Manual.

Network services

At the time and in the markets for which Econet was developed, the main purpose of computer networking was to provide local area shared access to expensive hardware such as disc storage and printers. Acorn provided software for the BBC Micro to implement a file server, and optionally a printer server also. The original file server was very basic, essentially allowing limited access to a floppy disc over the network. The server software was further developed over many years, and Acorn and other manufacturers also produced dedicated Econet servers based on various technologies. So the servers available fell into roughly three categories:
The machine type numbers listed in the "Supported systems" section above are an indication of the range of hardware that was available or planned.
Additional services could be implemented, using the network API provided. Short utilities such as network chat programs were often published in magazines or distributed by sharing among users; these made use of the Econet protocols to work alongside the basic file and print services. Larger software packages were available that provided services such as Teletext and modem drivers.

Comparison with modern systems

While Econet can be considered unique amongst network systems and specific to the Acorn range of computers, it does share many commonalities with modern network file systems and protocols: