The Fender HM strat was originally produced in Japan. Some sources say production started as early as 1984. Subsequently, in 1989, it was produced in the United States. Some evidence indicates that assembly in the U.S. with components imported from Japan may have begun as early as 1987. First Version - The first version appeared with a distinct Strat logo in the headstock, 24 medium jumbo frets, a maple neck with rosewood or maple fingerboard and with one of the four neck "bolts". The scale length is an even, rather than the normal commonly used on Stratocaster and Telecaster guitars. In addition, the Fender HM Strat had a Kahler licensed double-locking tremolo system, "Spyder", and Gotoh tuners, one DiMarzio humbucking H* "Super 3" pickup, and sometimes two single coil pickups, two humbuckers, or sometimes a single additional Super Distortion, and a side-mounted jack socket. Kahler USA offers a detailed schematic diagram of the Kahler Spyder tremolo and several replacement parts are available. Japanese-assembled guitars have colored polyester on the bodies, and clear polyester on the necks. American-assembled HM Strats have a very hard aircraft grade urethane color and clear coats on the body, while still using a polyester finish on the neck. Second Version - The US HM series stratocasters were produced in 1990 and included the Strat 10-3200, 10-2100, 10-2102, 10-2200, 10-2300 and 10-2400 models. All HM strat US made models had a scale length of and a radius of. How to distinguish between Japanese and US assembled Fender HM Strats - The USA model features a DiMarzio Super 3 humbucker with American Standardsingle coils in the middle and neck, which are easily distinguishable by the red/white wires and blue/white wires that are visible while looking straight at the pickup. The Japanese models feature the more generic black/white wires on the single coils as well as a DiMarzio Super Distortion. Moreover, the 1988 price list describes the line as merely "H.M. Series Stratocaster", while the 1989 price list mentions, "U.S. H.M. Series Stratocaster" from which one might garner that the earliest models were the Japan/US collaboration, followed by a straight USA-made model. HM Strat Ultra - Later on, Fender introduced the USA HM Strat Ultra that is considered by many to be superior to the previous HM versions. Fender HM Strat ultra differs in that it has 4 Lace Sensor pickups in HSS configuration, a smaller 'digitalized' Strat logo and an ebony fingerboard with split-triangle inlays. The Fender logo on the headstock is of mother of pearl. 2020 Reissue - At the 2020 NAMM Show, Fender introduced a limited edition reissue of the HM Strat. The reissue keeps the Gotoh tuners, Floyd Rose bridge, and HSS design, but replaces the DiMarzio and Lace Sensor pickups in previous versions with Fender-developed hi-gain pickups.
Background and user reception
In 1985, a group of musically dedicated people and investors led by William Schultz purchased the Fender company from Columbia Broadcasting System. The building that contained the equipment was not part of the sale, so the plant was relocated. During this period, when there was little to no production of instruments in the U.S., Fender imported instruments made by Fender Japan/FujiGen, many of which were the "Contemporary" Stratocasters and Telecasters. These were sold in the U.S., along with "vintage" spec models, from 1985 on up almost through the end of the HM Strat era. Thus, it is not unusual that a Fender HM strat may have Japanese-made components assembled in the US. The Contemporary Stratocaster was eventually supplanted by the HM Strat in 1988, which went through subsequent versions. The first U.S. Fender Superstrat was the adaptation of the Japanese HM Strat, plus the addition of the U.S. Contemporary Stratocaster, in 1989. However, this model was also opposed by Fender s as its features were "off the Fender's beaten track". The use of a humbucker, 24 jumbo frets and occasionally basswood as well as the overall appearance were not particularly welcomed by most conservative Fender fans. Today, a well-maintained Fender HM Strat becomes increasingly rare to find. As with most discontinued instruments, however, this guitar is also hard to maintain. For instance, although Kahler USA provides product support for the Kahler Spyder tremolo parts, various other components of this guitar such as knobs are currently unavailable.
Notable users
The Fender HM strat was endorsed by Greg Howe. Many of which were featured on album covers up until 1995 Parallax. In recent years, guitarist Ethan Brosh has been spotted playing old 80's HM Strats as his touring instrument of choice.
