In 1978, Ford Australia unveiled plans for an all-new Falcon, dubbed the XD, that would be released in 1979. Unlike the current XC, the new model would be offered only as a four-door sedan or station wagon, meaning the two-door XC Hardtops of 1978 would be the last of that design. In December 1977 Ford built 13 special order XC Falcon GS Hardtops with VINs beginning JG65TE. These cars were specially modified in the P&A workshop at Ford's Campbellfield factory. All vehicles were modified to accord with 'evolution' upgrades that had been approved by CAMS for homologation to Australian Group C touring car racing Falcons... the changes were mostly designed to enhance race durability; these vehicles, often referred to as "Pre-Cobras", were intended to be raced by teams at Bathurst in 1977. The homologation modifications included rear wheel wells that were deepened inboard by 1 inch to accommodate larger racing wheels and tyres, a reverse bonnet scoop to allow the race car engines to draw cool air from the base of the windscreen, twin electric fans that were switchable from the dash, a front shocker tower brace that stiffened the front end, an idler arm brace, and an aero package including a rear "blade" spoiler and a front air dam. The 13 cars were available in standard body and interior colours and retained the side trim strips, dummy rear brake scoops and unpainted chrome bumpers of the standard GS hardtops. The race cars did complete the 1977 Endurance Series in their new specification and then participated in the 1978 ATCC season. The modifications that featured in these 13 GS Hardtops formed the basis of the specification for the 30 specific Option 97 Cobra Hardtops built in 1978, although there were minor differences as the Option 97 cars also incorporated further evolution parts such as reinforced fan brackets and a deeper front spoiler. In addition the Option 97 cars received a black corduroy seat material and Scheel front seats to differentiate them from the Option 96 Cobras. When final production of the XC Hardtop at the Broadmeadows Assembly plant was ending in March 1978, more than 400 body shells were left unsold and Ford Australia faced a dilemma of how to shift them, rather than scrap them. When an original proposal to turn these cars into black and gold Playboy-themed cars was rejected as sending the wrong image for a family car company, Ford turned to Edsel Ford II, then the Deputy Managing Director of Ford Motor Company who was also M.D. of Ford Australia at that time. He and a local design team elected to capitalise on Allan Moffat and Colin Bond's crushing 1-2 finish at the 1977 Bathurst 1000 by creating a road car with a "Shelby Mustang" look that could be homologated for racing, while at the same time offering enthusiasts the opportunity to own a street-legal version of Moffat's race car. The first prototype Falcon Cobra was built in late April 1978 and production began that same July. The cars were painted Bold Blue with an overlay of Sno White, with Olympic Blue accent stripes separating the two colours... "Cobra" emblem decals, a throwback to Carroll Shelby's Mustangs of the 1960s, were affixed to the front fenders, along with a name decal at the rear. Unusually, the bodyshells were painted blue first, the intended area of blue stripes and sills then masked and the white coat painted over the top. Each of the cars was given its own individual serial number and fitted with a sequentially numbered plaque on the dash. The first 200 Cobras produced were given the 5.8L 351 Cleveland V8, while the other 200 received the 4.9L 302 Cleveland... the only exceptions to this being build number 001 is a 302ci V8 and build number 351 is a 351ci V8. Cobras were available with either automatic or manual transmission. Standard equipment included four-wheel disc brakes, limited slip differential, 15-inch Bathurst Globe wheels, front & rear spoilers and dual exhaust. The interiors were uniformly black, with Cobra specific cloth seat inserts in black with blue stripes that match those on the outside body. Cars numbered from 002 to 0031 were known as Option 97 specification, the so-called "Bathurst Cobras", fitted with parts to allow homologation for racing, including twin radiator fans switchable from the dash, a gearbox oil cooler, suspension bracing and reworked rear wheel body housings. They were most easily identified from the other 370 Option 96 Cobras via their large rear-opening bonnet bulge. Allan Moffat's "Moffat Ford Dealers" race cars of late 1978 shared the same body paint decoration as the road cars. Falcon Cobras have become increasingly revered by collectors across Australia and a mint example might be worth upwards of $100,000... with Option 97 cars likely to fetch a further premium.
2007 FPV GT Cobra
At the 2007 Bathurst 1000, Ford Performance Vehicles unveiled a new limited edition Cobra, celebrating 30 years since Moffat and Bond's 1-2 finish. Like the original, the new FPV GT Cobra sedan has a certified build of just 400 units. In addition, a Cobra Ute was created, of which just 100 were built. Both cars are powered by the 5.4-litre Boss 302 engine; the name is derived from the 302kW power output.
