Geometrography


In mathematics, in geometry, geometrography is the study of geometrical constructions. The concepts and methods of geometrography were first expounded by Émile Lemoine, a French civil engineer and a mathematician, in a meeting of the French Association for the Advancement of the Sciences held at Oran in 1888.
Lemoine later expanded his ideas in another memoir read at the Pau meeting of the same Association held in 1892.
It is well known in elementary geometry that certain geometrical constructions are simpler than certain others. But in many case it turns out that the apparent simplicity of a construction does not consist in the practical execution of the construction, but in the brevity of the statement of what has to be done. Can then any objective criterion be laid down by which an estimate may be formed of the relative simplicity of several different constructions for attaining the same end? Lemoine developed the ideas of geometrography to answer this question.

Basic ideas

In developing the ideas of geometrography, Lemoine restricted himself to Euclidean constructions using rulers and compasses alone. According to the analysis of Lemoine, all such constructions can be executed, as a sequence of operations selected form a fixed set of five elementary operations. The five elementary operations identified by Lemoine are the following:

Elementary operations in a geometrical construction
Sl. No.OperationNotation
for operation
1To place the edge of the ruler in coincidence with a pointR1
2To draw a straight lineR2
3To put a point of the compasses on a determinate pointC1
4To put a point of the compasses on an indeterminate point of a line C2
5To describe a circleC3


In a geometrical construction the fact that an operation X is to be done n times is denoted by the expression nX. The operation of placing a ruler in
coincidence with two points is indicated by 2R1. The operation of putting one point of the compasses on a determinate point and the other point of the compasses
on another determinate point is 2C1.
Every geometrical construction can be represented by an expression of the following form
Here the coefficients l1, etc. denote the number of times any
particular operation is performed.

Coefficient of simplicity

The number l1 + l2 + m1 +m2 + m3 is called the coefficient of simplicity, or the simplicity of the construction. It denotes the total number of operations.

Coefficient of exactitude

The number l1 + m1 + m2 is
called the coefficient of exactitude, or the exactitude of the construction; it denotes the number of preparatory operations, on which the exactitude of the construction depends.

Examples

Lemoine applied his scheme to analyze more than sixty problems in elementary geometry.