Gin pole


A gin pole is a supported pole that uses a pulley or block and tackle on its upper end to lift loads. The lower end is braced or set in a shallow hole and positioned so the upper end lies above the object to be lifted. The pole is secured with three or more guy-wires. These are manipulated to move the load laterally, with up and down controlled by the pulley or block. A gin pole can also be “jumped” to build a tower.
The gin pole is derived from a gyn, and considered a form of derrick, called a standing derrick or pole derrick, distinguished from sheers by having a single boom rather than a two-legged one.
Gin poles are also used to raise loads above structures too tall to reach with a crane, such as placing an antenna on top of a tower/steeple, and to lift segments of a tower on top of one-another during erection. When used to create a segmented tower, the gin pole can be detached, raised, and re-attached to the just-completed segment in order to lift the next. This process of jumping is repeated until the topmost portion of the tower is completed. They can also hold a person if strong enough. Thus opening stage uses, such as in magic shows
Gin poles are mounted on trucks as a primitive form of mobile crane, used for lifting and relocating loads, and salvage operations in lieu of a more sophisticated wrecker.