The Great LakesSport Trainer is an Americanbiplane trainer and aerobatic aircraft. It was originally produced in large numbers before the company building it went bankrupt in the Great Depression in 1933. Owing to its continuing popularity, however, it was eventually placed back into production in the 1970s and again in 2011 by WACO Classic Aircraft.
Development and design
The Great Lakes Aircraft Corporation of Cleveland, Ohio produced a design for a small two-seat sports/trainer in early 1929, with the first prototype flying in March 1929. The resulting aircraft, designated 2-T-1 was a single bay biplane of mixed, fabric-covered construction and with a tailskid undercarriage. Power was by a single Cirrus IIIinline engine. Initial testing showed that the aircraft was tail heavy, so after the first four aircraft were built, the upper wing was swept back. In January 2011, WACO Classic Aircraft announced that it will put the Great Lakes Model 2T-1A-1/2 model biplane back into production. The aircraft had not been available since 1980. The aircraft will incorporate several changes including metal wing spars. It will be offered in two models, a touring model, with a Lycoming IO-360-B1F6 engine and a higher-performance sport model, with a Lycoming AEIO-360-B1G6 engine. Work on the new production model was completed in June 2013 and the base price announced as US$245,000.
Operational history
The aircraft proved very successful, with about 250 built before construction ended. It was highly maneuverable even on the relatively modest power of a Cirrus engine. A 1929 Great Lakes Model 2T1a held for many years the world record for consecutive outside loops, a total of 131, set by Jim Moss flying the Hunt Special which by the early 1930s had been highly modified and re-powered with a Warner Scarab 165 7 cylinder radial engine. The Great Lakes continued to be popular well after production ended, and many aircraft adopted more powerful engines, particularly the Jacobsradial engines. Eventually, in the 1960s, the rights for the Sport Trainer were acquired by Harvey Swack, who offered plans of the aircraft for sale to homebuilders. In 1972, Swack sold the rights on to Doug Champlin, who set up a reconstituted Great Lakes Aircraft Company to produce a revised version meeting the current airworthiness requirements, powered by modern Lycoming engines and revised materials of construction. The first of the new production aircraft, the Model 2T-1A-1, powered by a 140 hp engine was certified in May 1973, with production starting in October that year. A more powerful version, the 2T-1A-2 followed in July 1974. In 1978, production was divided between Wichita, Kansas, and Enid, Oklahoma, with the intent on relocation to Florida. Rights to the Sport Trainer continued to switch hands, resulting in production moving several times. By 1980, 137 Sport Trainers had been built. Production finally finished in 1985.
