Gulfstream III


The Gulfstream III, a business jet produced by Gulfstream Aerospace, is an improved variant of the Grumman Gulfstream II.

Design and development

The Gulfstream III was built at Savannah, Georgia, in the United States and was designed as an improved variant of the Grumman Gulfstream II. Design studies were performed by Grumman Aerospace Corporation in collaboration with Gulfstream American Corporation. Design of the Gulfstream III started with an effort to synthesize a completely new wing employing NASA supercritical airfoil sections and winglets. Optimization studies considering weight, drag, fuel volume, cost, and performance indicated that a substantial portion of the new wing benefit could be secured with modifications to the existing wing. As a result, the new wing concept was canceled and work began on design modifications that would retain the Gulfstream II wing box structure and trailing edge surfaces.
Compared to the G-1159 Gulfstream II, the wing has more span and winglets added, the leading edge is longer and its contour is modified. The fuselage is longer aft of the main door, the radome is extended and there is a new curved windshield. Maximum takeoff weight is increased to or and there are various changes to the autopilot, flight instruments, and engine instruments. The aircraft received its type certificate from the American Federal Aviation Administration on 22 September 1980. A total of 202 Gulfstream IIIs were built, with the last example built in 1986.
In 2013, the FAA modified 14 CFR part 91 rules to prohibit the operation of jets weighing 75,000 pounds or less that are not stage 3 noise compliant after December 31, 2015. The Gulfstream III is listed explicitly in Federal Register . Any Gulfstream III's that have not been modified by installing Stage 3 noise compliant engines or have not had "hushkits" installed for non-compliant engines will not be permitted to fly in the contiguous 48 states after December 31, 2015. 14 CFR §91.883 Special flight authorizations for jet airplanes weighing 75,000 pounds or less – lists special flight authorizations that may be granted for operation after December 31, 2015.
By 2018, prices for a used 1982 GIII started at $695,000.

Variants

Civil variants

NOTE: United States Army C-20F and C-20J, United States Navy/United States Marine Corps C-20G, and United States Air Force C-20H aircraft are all Gulfstream IV variants

Special mission variants

A NASA Gulfstream C-20B has been fitted with a centerline pylon to allow it to carry the Unmanned Aerial Vehicle Synthetic Aperture Radar pod.
A NASA Gulfstream III has also been fitted with a centerline pylon to allow it to carry the Airborne Microwave Observatory of Subcanopy and Subsurface pod, a modification of the UAVSAR pod.
The Phoenix Air Group operates two former Royal Danish Air Force SMA-3 aircraft and a Gulfstream III. One aircraft provides airborne maritime range surveillance for the Missile Defense Agency and other Department of Defense range facilities using a high definition Texas Instruments APS-127 Surface Search Radar system. All three are configured with a large cargo door. In 2008 Phoenix Air developed an Airborne Biomedical Containment System with the CDC. In 2014, the system was deployed during the Ebola virus epidemic in Liberia to fly 12 ebola missions to the United States.
N30LX has been modified by the addition of a ventral canoe and sensor turret as the "Dragon Star" Airborne Multi-Intelligence Laboratory for use by Lockheed Martin. This has been leased by Italy since 2012.
Calspan operates N710CF, which has been modified as an airborne test bed. Modifications include a centerline pylon and a dorsal satcom radome
Two Gulfstream IIIs, K2961 and K2962, equipped with long-range oblique photography cameras mounted in the fuselage, were delivered to the Indian Air Force.

Operators

Military and government operators

Military and government operators of the Gulfstream III and C-20 include:
;
;
;
;
;
;
;
;
;
;
's Gulfstream landing at Edwards Air Force Base
;
;
;
;
;
;
;