Hale Telescope
The Hale Telescope is a, 3.3 reflecting telescope at the Palomar Observatory in California, US, named after astronomer George Ellery Hale. With funding from the Rockefeller Foundation in 1928, he orchestrated the planning, design, and construction of the observatory, but with the project ending up taking 20 years he did not live to see its commissioning. The Hale was groundbreaking for its time, with double the diameter of the second-largest telescope, and pioneered many new technologies in telescope mount design and in the design and fabrication of its large aluminum coated "honeycomb" low thermal expansion Pyrex mirror. It was completed in 1949 and is still in active use.
The Hale Telescope represented the technological limit in building large optical telescopes for over 30 years. It was the largest telescope in the world from its construction in 1949 until the Russian BTA-6 was built in 1976, and the second largest until the construction of the Keck Observatory Keck 1 in 1993.
History
Hale supervised the building of the telescopes at the Mount Wilson Observatory with grants from the Carnegie Institution of Washington: the telescope in 1908 and the telescope in 1917. These telescopes were very successful, leading to the rapid advance in understanding of the scale of the Universe through the 1920s, and demonstrating to visionaries like Hale the need for even larger collectors.The chief optical designer for Hale's previous 100-inch telescope was George Willis Ritchey, who intended the new telescope to be of Ritchey–Chrétien design. Compared to the usual parabolic primary, this design would have provided sharper images over a larger usable field of view. However, Ritchey and Hale had a falling-out. With the project already late and over budget, Hale refused to adopt the new design, with its complex curvatures, and Ritchey left the project. The Mount Palomar Hale Telescope turned out to be the last world-leading telescope to have a parabolic primary mirror.
In 1928 Hale secured a grant of $6 million from the Rockefeller Foundation for "the construction of an observatory, including a 200-inch reflecting telescope" to be administered by the California Institute of Technology, of which Hale was a founding member. In the early 1930s, Hale selected a site at on Palomar Mountain in San Diego County, California, US, as the best site, and less likely to be affected by the growing light pollution problem in urban centers like Los Angeles. The Corning Glass Works was assigned the task of making a primary mirror. Construction of the observatory facilities and dome started in 1936, but because of interruptions caused by World War II, the telescope was not completed until 1948 when it was dedicated. Due to slight distortions of images, corrections were made to the telescope throughout 1949. It became available for research in 1950.
A functioning one tenth scale model of the telescope was also made at Corning.
The telescope saw first light on January 26, 1949, at 10:06pm PST under the direction of American astronomer Edwin Powell Hubble, targeting NGC 2261, an object also known as Hubble's Variable Nebula. The photographs made then were published in the astronomical literature and in the May 7, 1949 issue of Collier's Magazine.
The telescope continues to be used every clear night for scientific research by astronomers from Caltech and their operating partners, Cornell University, the University of California, and the Jet Propulsion Laboratory. It is equipped with modern optical and infrared array imagers, spectrographs, and an adaptive optics system. It has also used lucky cam imaging, which in combination with adaptive optics pushed the mirror close to its theoretical resolution for certain types of viewing.
One of the Corning Labs' glass test blanks for the Hale was used for the C. Donald Shane telescope's primary mirror.
The collecting area of the mirror is about 31,000 square inches.
Components
The Hale was not just big, it was better: it combined breakthrough technologies including a new lower expansion glass from Corning, a newly invented Serruier truss, and vapor deposited aluminum.Mounting structures
The Hale Telescope uses a special type of equatorial mount called a "horseshoe mount", a modified yoke mount that replaces the polar bearing with an open "horseshoe" structure that gives the telescope full access to the entire sky, including Polaris and stars near it. The optical tube assembly uses a Serrurier truss, then newly invented by Mark U. Serrurier of Caltech in Pasadena in 1935, designed to flex in such a way as to keep all of the optics in alignment. Theodore von Karman designed the lubrication system to avoid potential issues with turbulence during tracking.200-inch mirror
Originally, the Hale Telescope was going to use a primary mirror of fused quartz manufactured by General Electric, but instead the primary mirror was cast in 1934 at Corning Glass Works in New York State using Corning's then new material called Pyrex. Pyrex was chosen for its low expansion qualities so the large mirror would not distort the images produced when it changed shape due to temperature variations.The mirror was cast in a mold with 36 raised mold blocks. This created a honeycomb mirror that cut the amount of Pyrex needed down from over to just, making a mirror that would cool faster in use and have multiple "mounting points" on the back to evenly distribute its weight. The shape of a central hole was also part of the mold so light could pass through the finished mirror when it was used in a Cassegrain configuration. While the glass was being poured into the mold during the first attempt to cast the 200-inch mirror, the intense heat caused several of the molding blocks to break loose and float to the top, ruining the mirror. The defective mirror was used to test the annealing process. After the mold was re-engineered, a second mirror was successfully cast.
After cooling several months, the finished mirror blank was transported by rail to Pasadena, California. Once in Pasadena the mirror was transferred from the rail flat car to a specially designed semi-trailer for road transport to where it would be polished. In the optical shop in Pasadena standard telescope mirror making techniques were used to turn the flat blank into a precise concave parabolic shape, although they had to be executed on a grand scale. A special mirror cell jig was constructed which could employ five different motions when the mirror was ground and polished. Over 13 years almost of glass was ground and polished away reducing the weight of the mirror to. The mirror was coated with a reflective aluminum surface using the same aluminum vacuum-deposition process invented in 1930 by Caltech physicist and astronomer John Strong.
The Hale's mirror was near the technological limit of a primary mirror made of a single rigid piece of glass. Using a monolithic mirror much larger than the 5-meter Hale or 6-meter BTA-6 is prohibitively expensive due to the cost of both the mirror, and the massive structure needed to support it. A mirror beyond that size would also sag slightly under its own weight as the telescope is rotated to different positions, changing the precision shape of the surface, which must be accurate to within 2 millionths of an inch. Modern telescopes over 9 meters use a different mirror design to solve this problem, with either a single thin flexible mirror or a cluster of smaller segmented mirrors, whose shape is continuously adjusted by a computer-controlled active optics system using actuators built into the mirror support cell.
Dome
The moving weight of the upper dome is about 1000 US tons, and can rotate on wheels. The dome doors weigh 125 tons each.The dome is made of welded steel plates about 10 mm thick.
Observations and research
The first observation of the Hale telescope was of NGC 2261 on January 26, 1949.Halley's Comet upcoming 1986 approach to the Sun was first detected by astronomers David C. Jewitt and G. Edward Danielson on 16 October 1982 using the 200-inch Hale telescope equipped with a CCD camera.
Two moons of the planet Uranus were discovered in September 1997, bringing the planet's total known moons to 17 at that time. One was Caliban, which was discovered on 6 September 1997 by Brett J. Gladman, Philip D. Nicholson, Joseph A. Burns, and John J. Kavelaars using the 200-inch Hale telescope. The other Uranian moon discovered then is Sycorax and was also discovered using the 200 inch Hale telescope.
In 1999, astronomers used a near-infrared camera and adaptive optics to take some of the best Earth-surface based images of planet Neptune up to that time. The images were sharp enough to identify clouds in the ice giant's atmosphere.
The Cornell Mid-Infrared Asteroid Spectroscopy survey used the Hale Telescope with a spectrograph to study spectra from 29 asteroids. An example of a result from that study, is that the asteroid 3 Juno was determined to have average radius of 135.7±11 km using the infrared data.
In 2009, using a coronograph, the Hale telescope was used to discover the star Alcor B, which is a companion to Alcor in the famous Big Dipper constellation.
In 2010, a new satellite of planet Jupiter was discovered with the 200-inch Hale, called S/2010 J 1 and later named Jupiter LI.
In October 2017 the Hale telescope was able to record the spectrum of the first recognized interstellar object, 1I/2017 U1 ; while not specific mineral was identified it showed the visitor had a reddish surface color.
Direct imaging of exoplanets
Up until the year 2010, telescopes could only directly image exoplanets under exceptional circumstances. Specifically, it is easier to obtain images when the planet is especially large, widely separated from its parent star, and hot so that it emits intense infrared radiation. However, in 2010 a team from NASA's Jet Propulsion Laboratory demonstrated that a vortex coronagraph could enable small scopes to directly image planets. They did this by imaging the previously imaged HR 8799 planets using just a 1.5 m portion of the Hale Telescope.s around the star HR8799 using a vortex coronagraph on a 1.5m portion of the Hale Telescope
Comparison
The Hale had four times the light-collecting area of the second-largest scope when it was commissioned in 1949. Other contemporary telescopes were the Hooker Telescope at the Mount Wilson Observatory and the Otto Struve Telescope at the McDonald Observatory.| # | Name / Observatory | Image | Aperture | Altitude | First Light | Special advocate |
| 1 | Hale Telescope Palomar Obs. | 200-inch 508 cm | 1713 m | 1949 | George Ellery Hale John D. Rockefeller Edwin Hubble | |
| 2 | Hooker Telescope Mount Wilson Obs. | 100-inch 254 cm | 1742 m | 1917 | George Ellery Hale Andrew Carnegie | |
| 3 | McDonald Obs. 82-inch McDonald Observatory | 82-inch 210 cm | 2070 m | 1939 | Otto Struve |