High entropy alloys


High-entropy alloys are alloys that are formed by mixing equal or relatively large proportions of five or more elements. Prior to the synthesis of these substances, typical metal alloys comprised one or two major components with smaller amounts of other elements. For example, additional elements can be added to iron to improve its properties, thereby creating an iron based alloy, but typically in fairly low proportions, such as the proportions of carbon, manganese, and the like in various steels. Hence, high entropy alloys are a novel class of materials. The term “high-entropy alloys” was coined because the entropy increase of mixing is substantially higher when there is a larger number of elements in the mix, and their proportions are more nearly equal.
These alloys are currently the focus of significant attention in materials science and engineering because they have potentially desirable properties.
Furthermore, research indicates that some HEAs have considerably better strength-to-weight ratios, with a higher degree of fracture resistance, tensile strength, as well as corrosion and oxidation resistance than conventional alloys. Although HEAs have been studied since the 1980s, research substantially accelerated in the 2010s.

Early development

Although HEAs were considered from a theoretical standpoint as early as 1981 and 1996, and throughout the 1980s, in 1995 Jien-Wei Yeh came up with his idea for ways of actually creating high-entropy alloys in 1995, while driving through the Hsinchu, Taiwan, countryside. Soon after he decided to begin creating these special metal alloys in his lab. With Taiwan being the only country researching these alloys for over a decade, most other countries in Europe, the United States and other parts of the world lagged behind in the development of HEAs. Significant research interest from other countries did not develop until after 2004 when Jien-Wei Yeh and his team of Taiwanese scientists invented and built the world's first high-entropy alloys that can withstand extremely high temperatures and pressures. Potential applications include use in state-of-the-art race cars, spacecraft, submarines, nuclear reactors, jet aircraft, nuclear weapons, long range hypersonic missiles and so on.
A few months later, after the publication of Jien-Wei Yeh's paper, another independent paper on high entropy alloys was published by another team from the United Kingdom composed of Brian Cantor, I. T. H. Chang, P. Knight and A. J. B. Vincent. Yeh was also the first to coin the term "high-entropy alloy" when he attributed the high configurational entropy as the mechanism stabilizing the solid solution phase. Cantor, not knowing of Yeh's work, did not describe his alloy as a "high-entropy" alloy, but the base alloy he developed, equiatomic FeCrMnNiCo, has been the subject of considerable work in the field.
Before the classification of high entropy alloys and multi-component systems as a separate class of materials, nuclear scientists had already studied a system that can now be classified as a high entropy alloy: within nuclear fuels Mo-Pd-Rh-Ru-Tc particles form at grain boundaries and at fission gas bubbles. Understanding the behavior of these '5 metal particles' was of specific interest to the medical industry as Tc-99m is an important medical imaging isotope.

Definition

There is no universally agreed-upon definition of a HEA. The originally defined HEAs as alloys containing at least 5 elements with concentrations between 5 and 35 atomic percent. Later research however, suggested that this definition could be expanded. Otto et al. suggested that only alloys that form a solid solution with no intermetallic phases should be considered true high-entropy alloys, as the formation of ordered phases decreases the entropy of the system. Some authors have described 4-component alloys as high-entropy alloys while others have suggested that alloys meeting the other requirements of HEAs, but with only 2–4 elements or a mixing entropy between R and 1.5R should be considered "medium-entropy" alloys.

Alloy design

In conventional alloy design, one primary element such as iron, copper, or aluminum is chosen for its properties. Then, small amounts of additional elements are added to improve or add properties. Even among binary alloy systems, there are few common cases of both elements being used in nearly-equal proportions such as Pb-Sn solders. Therefore, much is known from experimental results about phases near the edges of binary phase diagrams and the corners of ternary phase diagrams and much less is known about phases near the centers. In higher-order systems that cannot be easily represented on a 2-dimensional phase diagram, virtually nothing is known.

Phase formation

,, can be used to determine an upper bound on the number of phases that will form in an equilibrium system. In his 2004 paper, Cantor created a 20-component alloy containing 5 at% of Mn, Cr, Fe, Co, Ni, Cu, Ag, W, Mo, Nb, Al, Cd, Sn, Pb, Bi, Zn, Ge, Si, Sb, and Mg. At constant pressure, the phase rule would allow for up to 21 phases at equilibrium, but far fewer actually formed. The predominant phase was a face-centered cubic solid solution phase, containing mainly Fe, Ni, Cr, Co, and Mn. From that result, the FeCrMnNiCo alloy, which forms only a solid solution phase, was developed.
The Hume-Rothery rules have historically been applied to determine whether a mixture will form a solid solution. Research into high-entropy alloys has found that in multi-component systems, these rules tend to be relaxed slightly. In particular, the rule that solvent and solute elements must have the same crystal structure does not seem to apply, as Fe, Ni, Cr, Co, and Mn have 4 different crystal structures as pure elements.

Thermodynamic mechanisms

The multi-component alloys Yeh developed also consisted mostly or entirely of solid solution phases, contrary to what had been expected from earlier work in multi-component systems, primarily in the field of metallic glasses. Yeh attributed this result to the high configurational, or mixing, entropy of a random solid solution containing numerous elements. Because, and the phase with the lowest Gibbs free energy of formation will be the phase formed at equilibrium, increasing ΔS will increase the likelihood of a phase being stable. The mixing entropy for a random ideal solid solution can be calculated by:
where R is the ideal gas constant, N is the number of components, and ci is the atomic fraction of component i. From this it can be seen that alloys in which the components are present in equal proportions will have the highest entropy, and adding additional elements will increase the entropy. A 5 component, equiatomic alloy will have a mixing entropy of 1.61R.
However, entropy alone is not sufficient to stabilize the solid solution phase in every system. The enthalpy of mixing, must also be taken into account. This can be calculated using:
where is the binary enthalpy of mixing for A and B. Zhang et al. found, empirically, that in order to form a complete solid solution, ΔHmix should be between -10 and 5 kJ/mol. In addition, Otto et al. found that if the alloy contains any pair of elements that tend to form ordered compounds in their binary system, a multi-component alloy containing them is also likely to form ordered compounds.
Both of the thermodynamic parameters can be combined into a single, unitless parameter Ω:
where Tm is the average melting point of the elements in the alloy. Ω should be greater than or equal to 1.1 to promote solid solution development.

Kinetic mechanisms

The atomic radii of the components must also be similar in order to form a solid solution. Zhang et al. proposed a parameter δ representing the difference in atomic radii:
where ri is the atomic radius of element i and. Formation of a solid solution phase requires a δ≤6.6%, but some alloys with 4%<δ≤6.6% do form intermetallics.

Other properties

For those alloys that do form solid solutions, an additional empirical parameter has been proposed to predict the crystal structure that will form. If the average valence electron concentration of the alloy is ≥8, the alloy will form a face-centered cubic lattice. If the average VEC is <6.87, it will form a body-centered cubic lattice. For values in between, it will form a mixture of fcc and bcc. VEC has also been used to predict the formation of σ-phase intermetallics in chromium and vanadium-containing HEAs.

Synthesis

High-entropy alloys are difficult to manufacture using extant techniques, and typically require both expensive materials and specialty processing techniques.
High-entropy alloys are mostly produced using methods that depend on the metals phase - if the metals are combined while in a liquid, solid, or gas state.
Other HEAs have been produced by thermal spray, laser cladding, and electrodeposition.

Modeling and simulation

The atomic-scale complexity presents additional challenges to computational modelling of high-entropy alloys. Thermodynamic modelling using the CALPHAD method requires extrapolating from binary and ternary systems. Most commercial thermodynamic databases are designed for, and may only be valid for, alloys consisting primarily of a single element. Thus, they require experimental verification or additional ab initio calculations such as density functional theory. However, DFT modeling of complex, random alloys has its own challenges, as the method requires defining a fixed-size cell, which can introduce non-random periodicity. This is commonly overcome using the method of "special quasirandom structures," designed to most closely approximate the radial distribution function of a random system, combined with the Vienna Ab-initio Simulation Package. Using this method, it has been shown that results of a 4-component equiatomic alloy begins to converge with a cell as small as 24 atoms. The exact muffin-tin orbital method with the coherent potential approximation has also been employed to model HEAs. Other techniques include the 'multiple randomly populated supercell' approach, which better describes the random population of a true solid solution. This method has also been used to model glassy/amorphous systems without a crystal lattice.
Further, modeling techniques are being used to suggest new HEAs for targeted applications. The use of modeling techniques in this 'combinatorial explosion' is necessary for targeted and rapid HEA discovery and application.
Simulations have highlighted the preference for local ordering in some high entropy alloys and, when the enthalpies of formation are combined with terms for configurational entropy, transition temperatures between order and disorder can be estimated. - allowing one to understand when effects like age hardening and degradation of an alloy's mechanical properties may be an issue.
The transition temperature to reach the solid solution was recently addressed with the Lederer-Toher-Vecchio-Curtarolo thermodynamic model.

Properties and potential uses

Mechanical

The crystal structure of HEAs has been found to be the dominant factor in determining the mechanical properties. bcc HEAs typically have high yield strength and low ductility and vice versa for fcc HEAs. Some alloys have been particularly noted for their exceptional mechanical properties. A refractory alloy, VNbMoTaW maintains a high yield strength even at a temperature of, significantly outperforming conventional superalloys such as Inconel 718. However, room temperature ductility is poor, less is known about other important high temperature properties such as creep resistance, and the density of the alloy is higher than conventional nickel-based superalloys.
CoCrFeMnNi has been found to have exceptional low-temperature mechanical properties and high fracture toughness, with both ductility and yield strength increasing as the test temperature was reduced from room temperature to. This was attributed to the onset of nanoscale twin boundary formation, an additional deformation mechanism that was not in effect at higher temperatures. At ultralow temperatures, inhomogenous deformation by serrations has been reported. As such, it may have applications as a structural material in low-temperature applications or, because of its high toughness, as an energy-absorbing material. However, later research showed that lower-entropy alloys with fewer elements or non-equiatomic compositions may have higher strength or higher toughness. No ductile to brittle transition was observed in the bcc AlCoCrFeNi alloy in tests as low as 77 K.
Al0.5CoCrCuFeNi was found to have a high fatigue life and endurance limit, possibly exceeding some conventional steel and titanium alloys. But there was significant variability in the results, suggesting the material is very sensitive to defects introduced during manufacturing such as aluminum oxide particles and microcracks.
A single-phase nanocrystalline Al20Li20Mg10Sc20Ti30 alloy was developed with a density of 2.67 g cm−3 and microhardness of 4.9 – 5.8 GPa, which would give it an estimated strength-to-weight ratio comparable to ceramic materials such as silicon carbide, though the high cost of scandium limits the possible uses.
Rather than bulk HEAs, small-scale HEA samples exhibit extraordinarily high yield strengths of 4-10 GPa —one order of magnitude higher than that of its bulk form—and their ductility is considerably improved. Additionally, such HEA films show substantially enhanced stability for high-temperature, long-duration conditions. Small-scale HEAs combining these properties represent a new class of materials in small-dimension devices potentially for high-stress and high-temperature applications.
In 2018, new types of HEAs based on the careful placement of ordered oxygen complexes, a type of ordered interstitial complexes, have been produced. In particular, alloys of titanium, halfnium, and zirconium have been shown to have enhanced work hardening and ductility characteristics.
Bala et al. studied the effects of high-temperature exposure on the microstructure and mechanical properties of the Al5Ti5Co35Ni35Fe20 high-entropy alloy. After hot rolling and air-quenching, the alloy was exposed to a temperature range of 650-900°C for 7 days. The air-quenching caused γ′ precipitation distributed uniformly throughout the microstructure. The high-temperature exposure resulted in growth of the γ′ particles and at temperatures higher than 700°C, additional precipitation of γ′ was observed. The highest mechanical properties were obtained after exposure to 650°C with a yield strength of 1050 MPa and an ultimate tensile yield strength of 1370 MPa. Increasing the temperature further decreased the mechanical properties.
Liu et al. studied a series of quaternary non-equimolar high-entropy alloys AlxCo15Cr15Ni70-x with x ranging from 0 to 35%. The lattice structure transitioned from FCC to BCC as Al content increased and with Al content in the range of 12.5 to 19.3 at%, the γ′ phase formed and strengthened the alloy at both room and elevated temperatures. With Al content at 19.3 at%, a lamellar eutectic structure formed composed of γ′ and B2 phases. Due to high γ′ phase fraction of 70 vol%, the alloy had a compressive yield strength of 925 MPa and fracture strain of 29% at room temperature and high yield strength at high temperatures as well with values of 789, 546, and 129 MPa at the temperatures of 973, 1123, and 1273K.
In general, refractory high-entropy alloys have exceptional strength at elevated temperatures but are brittle at room temperature. The HfNbTaTiZr alloy is an exception with plasticity of over 50% at room temperature. However, its strength at high temperature is insufficient. With the aim of increasing high temperature strength Chien-Chuang et al modified the composition of HfNbTaTiZr,and studied the mechanical properties of the refractory high-entropy alloys: HfMoTaTiZr and HfMoNbTaTiZr. Both alloys have simple BCC structure. Their experiments showed that the yield strength of HfMoNbTaTiZr had a yield strength 6 times greater than HfNbTaTiZr at 1200°C with a fracture strain of 12% retained in the alloy at room temperature.

Electrical and magnetic

CoCrCuFeNi is an fcc alloy that was found to be paramagnetic. But upon adding titanium, it forms a complex microstructure consisting of fcc solid solution, amorphous regions and nanoparticles of Laves phase, resulting in superparamagnetic behavior. High magnetic coercivity has been measured in a BiFeCoNiMn alloy. Superconductivity was observed in TaNbHfZrTi alloys, with transition temperatures between 5.0 and 7.3 K.

Other

The high concentrations of multiple elements leads to slow diffusion. The activation energy for diffusion was found to be higher for several elements in CoCrFeMnNi than in pure metals and stainless steels, leading to lower diffusion coefficients.
Some equiatomic multicomponent alloys have also been reported to show good resistance to damage by energetic radiation. High entropy alloys are investigated for hydrogen storage applications.