Hillman Imp


The Hillman Imp is a small economy car that was made by the Rootes Group and its successor Chrysler Europe from 1963 until 1976. Revealed on 3 May 1963, after much advance publicity, it was the first British mass-produced car with the engine block and cylinder head cast in aluminium.
Being a direct competitor to the BMC's Mini, it used a space-saving rear-engine, rear-wheel-drive layout to allow as much luggage and passenger capacity as possible in both the rear and the front of the car. It used a unique opening rear hatch to allow luggage to be put into the back seat rest.
It was the first mass-produced British car with the engine in the back and the first to use a diaphragm spring clutch. The baulk-ring synchromesh unit for the transaxle compensated for the speeds of gear and shaft before engagement, which the Mini had suffered from during its early production years.
It incorporated many design features which were uncommon in cars until the late 1970s, such as a folding rear bench seat, automatic choke and gauges for temperature, voltage and oil pressure.
This unorthodox small/light car was designed for the Rootes Group by Michael Parkes and Tim Fry. It was manufactured at the purpose-built Linwood plant in Scotland. Along with the Hillman marque was a series of variations including an estate car, a van and a coupé.
The Imp gained a reputation as a successful rally car when Rosemary Smith won the Tulip Rally in 1965. This led the Rootes Group to produce a special rally conversion of the Imp under both the Hillman and Singer marques known as the Imp Rallye. In 1966, after winning the Coupe des Dames, Smith was disqualified under a controversial ruling regarding the headlamps of her Imp. The Imp was also successful in touring car racing when Bill McGovern won the British Saloon Car Championship in 1970, 1971 and 1972.
Considered ahead of its time, the Imp nevertheless suffered from reliability problems which harmed its reputation, leading the Rootes Group to be taken over by Chrysler Europe in 1967. The Imp continued in production until 1976, selling just under half a million units in 13 years.

Design and development

Known internally within the Rootes Groups as the APEX project, the Imp came about because of the fuel shortage caused by the Suez Crisis in 1956. Petrol was rationed in the UK, sales of heavy cars had dramatically slumped in sales, and there was a huge market for small economical cars with low fuel usage. The BMC's Mini had already taken advantage of this opportunity with production starting in 1959. Although the project officially began in 1955, the market for small cars was soon recognised and it was evident that the project would evolve into Rootes first small economical car. Seeing an opportunity, Mike Parkes and Tim Fry offered to design the car; "Well Mike Parkes and I were very good friends. So we went to the director of engineering B. B. Winter and said to him we could design you just the car we want. And he said: Alright get on with it then!". The early stages of development presented 'The Slug' which had clear similarities to a bubble car. However, the Rootes design board were not satisfied with this approach, and ordered the design team to press forward. This then lead to the next stage of the slug, appearing more utilitarian with appropriate styling.

Mark I Imp: 1963–1965

The Hillman Imp was officially announced on 2 May 1963 when HRH Duke of Edinburgh was invited to open the factory in Linwood. After the opening, he then drove a silver Imp to Glasgow Airport. One of the first Imps produced is currently on display at the Glasgow Museum of Transport. Another early example from 1963 is at the National Motor Museum, Beaulieu with the registration 1400 SC.
Before and after its announcement, the Imp garnered significant attention from the motoring press. In 1962 the Small Car & Mini Owner magazine published an article titled "Enter the AJAX!" making notability of the all-aluminium water-cooled rear engine. The same year, The Express published an article titled "It's the new 'baby'", calling it "the first baby car ever built by the Rootes Group". In June 1963, the Motor Sport magazine commented on the press' reaction to the Imp who strongly favoured the Imp in terms of its engine, gearbox and competitive price; at launch, the standard model cost £508 1s 3d, while the deluxe version was £532 4s 7d.
The name 'Imp' was originally the name of an engine produced by Ailsa Craig Ltd; a manufacturer of marine engines. In 1962 the company was acquired by Warsop Fram Group, and all of Ailsa Craig Ltd's assets were up for sale. The Warsop Fram Group traded the Imp name to the Rootes Group in exchange for a new Humber Super Snipe motor car. The namesake was to emphasize its small-size, and to help it sell as the obvious competitor for the Mini.
The water-cooled four cylinder power unit was based on the Coventry Climax FWMA fire pump engine featuring an all-aluminium alloy over-head cam, combined with a full-syncromesh aluminium transaxle. This combination was very advanced at the time. Sir Alec Issigonis, designer of the BMC's Mini, had recently described the fitting of syncromesh on all forward gears as "impossible". Besides the engine's unique design, it was canted at a 45° angle to keep the center of gravity low and optimise road-holding.
As reported in tests such as , rear-engined cars generally suffer from oversteer handling characteristics to some extent, and to counteract this as much as possible, the Imp has a semi-trailing arm independent rear suspension system. This relatively costly and sophisticated solution, atypical for small-car design at the time, was insisted upon by its designers after testing at length a Chevrolet Corvair with swing axles. To attain balanced handling, the Imp actually uses swing axle geometry at the front, but this initially led to too much understeer and the camber was later reduced by lowering the pivot points.
Gradually increasing in popularity in the UK, Mark I sales in 1963 estimated 33,000 and increased to 50,142 in 1964.
However the Imp had decreased in sales in 1965 to 42,663. Reliability problems, mainly due to poor cooling of the rear engine, had soon surfaced, and the public image of the car was becoming negative. This was extremely worrying for the Rootes Group who were trying to compete with the Mini when its production had already totalled 1,190,000 during the 1960s.
The Mark I was introduced as a 2-door saloon and appeared in two models; the Basic and De Luxe. In October 1964, a luxury edition was introduced known as the Singer Chamois.

Mark II Imp: 1965–1968

From the initial problems that surrounded the Mark I, the Rootes Group envisioned to re-introduce the Imp with significant changes both mechanically and cosmetically.
The Mk I Imps had a pneumatic throttle linkage and an automatic choke, both of which were replaced by more conventional items on the Mk II. The Mk II also had improved front suspension geometry and several trim and detail changes. Although the car was constantly improved over its production life, there was no single change as significant as that in 1965. Among these changes were an added water pump, cylinder head with larger ports and valves, along with 'Mark II' emblems appearing on the side of the doors.

Mark III Imp: 1968–1976

''The Imp was never officially badged nor referred to as the 'Mark III'. However, changes were made to the Imp range when the Rootes Group was fully acquired by Chrysler Europe and thus is sometimes referred to as the 'Chrysler Imp'.
After Rootes Group's acquisition from Chrysler in 1968, the entire range was revised except the Stiletto. The instrument panel and steering wheel were redesigned. The large speedometer previously positioned behind the steering wheel was replaced by a horizontal row of four circular dials/displays of varying detail and complexity according to the model specified. The right-hand dial, the speedometer, was now to one side of the driver's normal sightline, while one multi-functional stalk on the right side of the steering column replaced the two control stalks that had been directly behind the steering wheel, one on each side. The earlier Imp had been praised for the good ergonomic quality of its dash-board/fascia, and its replacement reflected similar trends in other new and modified UK vehicles at a time of "production rationalization". On the Imp, the more modern arrangement was seen by some as a missed opportunity.

Variants and "badge engineering"

Over the life of the car, Rootes produced four body styles. The original saloon was introduced in May 1963 and ran through to the end of production in 1976. It has an opening rear window, making it effectively a hatchback. The opening rear window is intended to make it easier to load the small luggage area behind the fold-down rear seat. The fold-down nature of the rear seat was itself unusual in small car design at the time, being more often associated with larger upmarket estate cars. In 1965 a van badged as the "Commer Imp" was introduced. A coupe, the Imp Californian, was introduced in 1967 at the same time as the van's pressings were used to create an estate car, badged "Hillman Husky". Several estate car prototypes using the saloon body with extended rooflines were tried, but never offered to the public. Instead, buyers choosing the estate had to settle for a van-derived car with somewhat unusual styling. Both the van and estate ceased production in 1970.
In an attempt to interest a wider public when sales figures fell well short of the intended 100,000 cars per annum, several badge-engineered derivatives, such as the luxury Singer Chamois, and the Sunbeam Sport, with a more powerful twin-carburettor engine, were offered with varying degrees of success. For marketing reasons the Singer variants were sold as Sunbeams in many export markets, even before May 1970 when the Singer marque was discontinued altogether by Chrysler UK. In some markets, such as France, the "Sunbeam" name was used on all British Rootes products, including the Imp and the Husky.
The coupe bodyshell is similar to the standard body but features a more shallow-raked windscreen and rear window which, unlike that on the standard bodied cars, can not be opened. The attempt at a more sporty design did not translate into better acceleration or top speed figures and the aerodynamics of the standard saloon are actually slightly better. The new body style made its first appearance at the Paris Motor Show in October 1967, with the introduction of the sporting Sunbeam Stiletto. The coupe body had also appeared, with less powerful engines, in the Hillman Imp Californian announced in January 1967 and the more luxurious Singer Chamois coupe.

Linwood plant

The Imp was a massive and expensive leap of faith for Rootes. The company did not have recent experience building small cars, even though it started off as a car builder by offering the then small Hillman Minx back in 1931. However, the Minx had since grown larger, and by the time the Imp was introduced it was well established as a medium-size family car. For the Imp, Rootes pioneered the use of an aluminium engine in a mass-production car. This process proved to be more complicated than simply substituting an aluminium design for a familiar and well-understood cast-iron design. Rootes had to build a new, computerised assembly plant on the outskirts of Paisley, in Linwood, in which to assemble the Imp. The UK Government Regional Assistance policy provided financial grants to the Rootes Group to bring approximately 6,000 jobs to the area. Linwood had become an area of significant unemployment because of redundancies in the declining shipbuilding industry on the nearby River Clyde. The investment also included an advanced die-casting plant to manufacture the aluminium engine casings, and a stake in a brand new Pressed Steel Company motor pressings works, which manufactured all the new car's body panels. The location of the plant led to significant logistical issues for the manufacturing process. Linwood was over away from Rootes' main factory at Ryton-on-Dunsmore, but the engine castings made in Linwood had to be sent to Ryton to be machined and assembled, then sent back up to be put on the cars – a round trip. This was addressed by a complex schedule of trains shifting completed cars and raw castings south, and trains loaded with engine – gearbox assemblies and many other Ryton sourced goods running north. To aid with balancing the logistical costs of this operation, body pressings for the Hillman Avenger were also made at Linwood, but transported south to Ryton on the component trains. This schedule remained in operation for the duration of Linwood Imp production.
The local West of Scotland workforce, recruited mainly from the shipbuilding industry, did not bring the distinct skills necessary for motor vehicle assembly, and Imp build quality and reliability suffered accordingly. However, industrial relations were also an issue in production. Industrial disputes and strike action became a regular occurrence, as was the case in many parts of British industry in the 1960s and '70s.

Marketing

Initially, the Imp was seen by Rootes as a potential second car for families with the means to acquire one. In this incarnation, it was a somewhat revolutionary, high-quality small car, with some above average features. Later the concept evolved into a kind of ultra-economy car with some cheaply and poorly executed, design features as a utilitarian vehicle, like some of the Eastern European marques of the time like Škoda, and later Lada, which were relatively low-cost economy cars, popular with British consumers. At one point the basic Hillman Imp was the cheapest new car on the British market, which increased low sales figures for a time.

Popularity

The initial problems damaged the Imp's reputation and popularity trailed off, with half of all production being from the first three years. It still sold thanks to its competitive price, distinctive styling, and cheap running costs, but sales never lived up to expectations for what had become a very competent small car. Another problem that contributed to the reputation for poor reliability was the lack of understanding of the maintenance needs of alloy engines by owners and the motor trade in the 1960s. Regular failures of the Giubo couplings also occurred. It was overshadowed in popularity by the Mini.

Rootes, Chrysler and end of production

The company's huge investment in both the Imp and the Linwood production plant was to be a significant part of the demise of the Rootes Group. The Imp's commercial failure added to the major losses suffered by Rootes, although the main reasons for these losses were unresolved industrial unrest and the effects of the link with the Chrysler Corporation of the USA. The link was initiated by Lord Rootes in 1964 as a partnership, but he died in October of that year and by 1967 the company had been acquired by Chrysler, to become part of Chrysler Europe. A year later, ahead of the 1968 London Motor Show, the recommended retail prices of most Imp models were reduced for the domestic market by more than four per cent, despite the general price inflation affecting the UK. Chrysler stewardship was blamed by some for the demise of the Imp in March 1976, after fewer than 500,000 had been built, but the entire Chrysler Europe operation was not a success and two years later it became part of Peugeot. The Imp was one of Britain's longest-running production cars with a 13-year run, despite lower sales in its later years. Its place in the Chrysler UK range was taken the following year by the Chrysler Sunbeam, a three-door hatchback based on the Avenger rear-wheel drive underpinnings. Both cars continued to be produced at the Linwood plant until it closed in 1981, after just 18 years in use.
The Ryton assembly plant continued in operation until December 2006, when production of the Peugeot 206 was switched to Slovakia.

Production

Approximately half a million, half of this number coming in the first three years of production.
The Imp used a derivative of the Climax FWMA engine whereas the Lotus cars used an FWMC engine which had an entirely different cylinder head.

Foreign assembly

were exported for assembly in Australia, Costa Rica, Ireland, Malaysia, Malta, New Zealand, Philippines, Portugal, South Africa, Uruguay, and Venezuela.
New Zealand cars were assembled as Hillmans by Chrysler/Hillman importer Todd Motors for several years from about 1964. The model returned, this time as a four-headlamp Sunbeam with the newer dashboard. Production of the Imp stopped in 1970 because Todd Motors required the Imp assembly line to build the Hillman Avenger. Todd Motors only had two final assembly lines at Petone, so the Avenger and the Hunter shared one line and the larger Chrysler Valiant was built on the other.
Imps were assembled by Rootes Australia in their Port Melbourne factory from 1964. The following models were produced:
- PM Imp - Available in Standard trim only. Produced from 1964-1965. Built from UK Mk I Imp CKD kits.
In 1965 a Super Imp was released and featured improvements due to the issues with the Mk1 and these were to carry over to the IMP II.
- PA Imp - Badged as "IMP II". Available in Standard or Super trim. Sold from February 1966- March 1968, it was still based on UK Mk I CKD kits.
- PB Imp - Badged as "IMP III". Also available in standard or Super trim. Produced from 1968 to around 1970. Further improvements made over the PA Imp, early cars were still based on UK Mk I CKD kits, but as these were depleted UK Mk 2 CKD kits were used. The very last batch of IMP IIIs may have used CKD Imp Sport body shell only. Later IMP IIIs also used the UK Mk2 engine.
- Hillman GT - built from Sunbeam Imp Sport CKD kits. Produced from 1967 to the end of 1968.
- Hillman Sonic/Stiletto - convertible model produced for Chrysler Australia by Eiffel Tower Motors of Dandenong.

Imp variants

MARCH 2019 OTHER CARS using ROOTES HILLMAN IMP Information Updates
Humberstone Sports 408
Beach sports racer w/ Imp Mechanicals
Blimp
Bolwell Mk4c
Bond 875 Mk I, Mk II / Ranger
Concept Centaur
Clan Crusader & 'Irish' Clan
Costin-Nathan
D Sports racing Imp
Davrian Mk I - VII
Diva Demon GT
DRW mk. 5
Elfin
Emery GT
Emery GTI
Evad 4
Robinson Special
Fraser GT, K9
Hartwell Delta Imp Racing car
Ginetta G15
Arawak Motors Hustler
SHEEN Imperator GTS
KNW Imposter
Johnny Walker Imp
Lola-bodied Imp Sport
Lombardi Grand Prix
BS Nymph
Nathan GT
Ogilvie GT
Mirage Pulsar
the Red Liner
Scorpion K19
Scrimp
Siva Llama
Turner Sports Imp
TVR Tina
Vixen
Voodoo Sports GT
WH Imp
Warwick University Imp
Dr Who's Whomobile / The Alien
Zagato Zimp
MORE COMING SOON

Imps in motorsport

The engine proved flexible and very easy to tune. It was an overhead camshaft design, which gave better air flow than a standard OHV engine. As with all engine heads, it could also be flowed and ported to allow better airflow at high engine speeds. Useful improvements in power could be gained by replacing the standard silencer with one that impeded the exhaust gas flow less and with better carburettors. However, in adapting the design to suit modern mass-production methods, Rootes had left the engine more fragile than the Coventry Climax model from which it had been derived.
The Imp enjoyed modest success in both club and international rallying. Rootes introduced a homologation special called the Rally Imp in 1964. It featured many modifications over the standard model, the most important of which was an engine enlarged to 998 cc. Notable successes for this model include the 1965 Tulip Rally in which the works Imps of Rosemary Smith and "Tiny" Lewis finished first and second overall.
's Hillman/Sunbeam Imp from the British Saloon Car Championship, which won three consecutive titles between 1970 and 1972.
Imps were also successful racing cars. The privateer team of George Bevan dominated the British Saloon Car Championship in the early 1970s. Driven by Bill McGovern, the Bevan Sunbeam Imp won the championship in 1970, 1971 and 1972 with limited factory support.
In UK club racing the Imp variants became highly successful in the under 1000 cc Special Saloon category. Notable exponents of the Imp in racing include Ian Forrest, Harry Simpson, Ricky Gauld, John Homewood, Roger Nathan, Gerry Birrell, Ray Payne and Chris Barter. To this day Imps still compete on historic rallies in the UK, with the Vokes' car often making it onto the podium in the HRCR Clubmans Rally Championship.
The Imp was also successfully raced and rallied in other parts of the world, notably Asia, where drivers including Andrew Bryson and Pardaman Singh regularly won saloon car categories into the 1980s.
The 998 cc Imp engine was also used in three-wheeled racing sidecars in the 1970s and 1980s. Exhaust systems were naturally constructed on a one-off basis. The engines often sporting the Twin Weber twin-choke set up. A number of sidecar crews raced Imp-engined outfits at the Isle of Man TT races, best placement being Roy Hanks in eleventh place in the 1976 TT 1000cc Sidecar. Imp-engined outfits are still regularly championed in classic racing.
Andy Chesman won the 1972 World Hydroplane championship using an Imp engine. He bought Imp specialist company Greetham Engineering, and designed a wedge head to increase the 998 cc engine to 125 bhp with twin 40DCOE Webers. He also fitted a spacer on top of the wet block to accommodate longer cylinder liners, increasing capacity to 1220 cc. At the BP-sponsored Windermere records week in October 1972, he raised the R1 Class water speed record to. He was killed in 1998 in a power-boat accident, still holding the record.