Honda RC100


The Honda RC100 was a prototype Formula One car built by engineers from Honda R&D Center, Tochigi, although not as an official project of Honda. The car was completed in 1993 and tested at Honda's Suzuka Circuit before being destroyed in a crash test. Two more cars, known as RC101 and RC101B, were also built and tested before the project ended.
Later, Honda calls the RC100 as the "RC-F1 1.0X", the RC101 as the "RC-F1 1.5X", and the RC101B as the "RC-F1 2.0X". They are often called also the chassis numbers: RC1-203/1, RC1B-101, and RC2-001.
This cars should not be confused with the Honda RA099, which was an official Honda prototype intended for the 1999 season but also never ran.

History

During the 1992 season, Honda announced that they would end their engine supply programme that had existed since 1984. This was due to Honda's desire for a new challenge after dominating in Formula One, with Honda deciding to move to the CART championship in North America.
However, engineers at Honda decided to launch their own separate project by attempting to build a full Formula One car, something Honda had not done since the 1960s. Honda at the time encouraged engineers to create their own projects in an attempt to motivate and boost morale. Funds from Honda's motorsports budget were specifically put aside each year for engineers to be able to realistically create these projects. These projects were however not backed by Honda Motor Company, and the engineers actually had to work on their personal projects on their own time.

1991: RC-F1 1.0X (RC100)

In the early 1990s, to study how a Formula One chassis works, the mass-produced car engineers of the Honda Automobile R&D Center, Tochigi, started to design a Formula One chassis as a volunteer activity outside of working hours. Although they could not obtain the latest Formula One cars in, they made the RC100's monocoque and suspension by calculation and analysis. By late 1991, the engineers was able to obtain and rebuild an used 1991 Honda Formula One engine, the RA121E and mounted it on the RC100/RC-F1 1.0X.
When the RC100 was tested, the engineers were satisfied with the performance of the monocoque and suspension at the test, but not with the aerodynamics of the chassis when tested in their wind tunnel, prompting the development of the next car. The RC100 was painted white, and nicknamed "White crow" by the Honda R&D engineers.

1992: RC-F1 1.5X (RC101)

Members of Honda R&D Center's chassis design team set about planning the RC100 chassis, attempting to fully comply with the Formula One regulations. The car used the same Honda RA122E/B V12 engine that was being used in Honda's engine supply program in 1992 and a six speed semi-automatic transmission built by Honda, mirroring the McLaren Honda MP4/7A,
While the car was still being completed in 1992, Honda Motor Company president Nobuhiko Kawamoto acknowledged that the project existed, although it was confirmed to have had no backing from Honda. The completed RC100 was unveiled to select media in February 1993. Later that year, Honda engineers had the car crash tested by FISA in order to confirm that it indeed complied with the 1993 regulations; this necessitated the destruction of the original car.
The first public testing came at Suzuka in January 1994, when yet another car had been built and Satoru Nakajima performing the public test. Soon after, testing on the RC101 came to an end as Honda concentrated on their new CART program.

1996: RC-F1 2.0X (RC101B)

Following rule changes necessitated by safety concerns following the deaths at 1994 San Marino Grand Prix, a third Honda R&D Formula One car was later built, based on regulations. The RC101B/RC-F1 2.0X featured new developments such as stepped bottom and a raised nose cone, and used a 3.0 liter Mugen-Honda engine used in that year's Ligier JS41 as well as grooved Bridgestone tires, in preparation for adoption of such tires by.

Aftermath

The RC100, RC101 and RC101B were planned to be destroyed after a demonstration running at the 2001 Honda Festival, annual social gathering of Honda companies, in Honda Automobile R&D Center, Tochigi; it was the first time the cars were presented following the tests. Ultimately, the RC100 was initially presented to Honda Technical College Kansai and all three cars are now shown at the Honda Collection Hall, located at Twin Ring Motegi.