Hulk (medieval ship type)


A hulk was a type of medieval sea craft, a technological predecessor of the carrack and caravel. The hulk appears to have remained a relatively minor type of sailing ship apparently peculiar to the Low Countries of Europe where it was probably used primarily as a river or canal boat, with limited potential for coastal cruising. The only evidence of hulks is from legal documents and iconography.

History

The name hulk may come from the Greek word holkas, meaning a towed boat, which would be consistent with the use of the hulk as a river barge. The word hulk also has a medieval meaning of "hollowed-out" or "husk-like" which is also apposite for the shape of the basic hulk. It is not clear when the hulk first appeared in medieval Europe. There is a lack of archaeological evidence because no wreck has been found. The only evidence of hulks comes from iconography of ships scholars believe to be hulks and medieval documentation of trade and regulations. It is commonly accepted by scholars that the hulk originated in the European Low Countries as a river vessel. It is worth noting, however, that a conclusive origin point for the hulk is not known. References to hulks in Aethelred II's legal code from England date from 1000 C.E. Hulks had fewer taxes levied on them than keels and cogs with the tax tied to the amount of goods. By the fourteenth century, English regulations imposed greater taxes on hulks than other vessels meaning that they were carrying more cargo than other vessels. This points to an increase in the hull size of hulks. It was by the fourteenth century that the Hanseatic League had adopted the hulk as their main vessel, capable of rivaling the cog's carrying capacity. Whether this was a consequence of a perception of the cog's shortcomings or a result of a shift in the economic geography of Northern Europe towards the Dutch Low Countries is not easy to discern. By the 15th century, the hulk was replaced by the caravel.

Design and function

Hulks were depicted with a single mast at the amidship that was commonly depicted with a square sail. The hull was constructed using reverse-clinker planking which involves starting clinker planking at the sheer strake and planking down to the keel. A hulk had two castles, one at the bow and one at the stern. Hulks went through two forms of rudder design. Earlier depictions showed hulks with a starboard quarter-rudder, while later depictions had median rudders.The overall design of the hulk appears to borrow or build on earlier shipbuilding traditions. The single mast with a square sail and the use of a quarter rudder appear to be borrowed from viking vessels while the shape of the keel is similar to that of cogs. The weakest part of an enlarged hulk would be its stem and stern. Since it has no substantial stem or stern posts those parts of the boat would have to be reinforced by the introduction of substantial aprons and breasthooks, perhaps augmented by sacrificial stem and stern posts between which the unsupported hull planking could be sandwiched. Using these techniques, perhaps better understood as a result of technological transfers from architectural woodworking, shipwrights were able to extend the hulk in size until it rivaled and surpassed the cog.
Because of their widespread use by the Hanseatic League and English documents regarding trade, it is accepted by scholars that the hulk was predominantly a cargo vessel. It is also possible that hulks served as warships. The use of the median rudder as well as oars as depicted in some illuminated manuscripts would make the hulk more maneuverable than the cog, and the larger vessel could provide a better platform for fighting.

Depictions of hulks from Medieval Europe