Hydrogen production


Hydrogen production is the family of industrial methods for generating hydrogen gas. As of 2020, the majority of hydrogen is produced from fossil fuels by steam reforming of natural gas, partial oxidation of methane, and coal gasification. Other methods of hydrogen production include biomass gasification and electrolysis of water.
The production of hydrogen plays a key role in any industrialized society, since hydrogen is required for many essential chemical processes., roughly 70 million tons of hydrogen are produced annually worldwide for various uses, such as, oil refining, and in the production of ammonia and methanol, and also as a fuel in transportation. The hydrogen generation market is expected to be valued at US$115.25 billion in 2017.

Methods of hydrogen production

There are four main sources for the commercial production of hydrogen: natural gas, oil, coal, and electrolysis; which account for 48%, 30%, 18% and 4% of the world's hydrogen production respectively.
Fossil fuels are the dominant source of industrial hydrogen. Carbon dioxide can be separated from natural gas with a 70–85% efficiency for hydrogen production and from other hydrocarbons to varying degrees of efficiency. Specifically, bulk hydrogen is usually produced by the steam reforming of methane or natural gas.

Steam reforming

Steam reforming is a hydrogen production process from natural gas. This method is currently the cheapest source of hydrogen. The process consists of heating the gas to between 700–1100 °C in the presence of steam and a nickel catalyst. The resulting endothermic reaction breaks up the methane molecules and forms carbon monoxide CO and hydrogen H2. The carbon monoxide gas can then be passed with steam over iron oxide or other oxides and undergo a water gas shift reaction to obtain further quantities of H2. The downside to this process is that its major byproducts are CO, CO2 and other greenhouse gases. Depending on the quality of the feedstock, one ton of hydrogen produced will also produce 9 to 12 tons of CO2.
For this process high temperature steam reacts with methane in an endothermic reaction to yield syngas.
In a second stage, additional hydrogen is generated through the lower-temperature, exothermic, water gas shift reaction, performed at about 360 °C:
Essentially, the oxygen atom is stripped from the additional water to oxidize CO to CO2. This oxidation also provides energy to maintain the reaction. Additional heat required to drive the process is generally supplied by burning some portion of the methane.

Other production methods from fossil fuels

Partial oxidation

Hydrogen production from natural gas or other hydrocarbons is achieved by partial oxidation. A fuel-air or fuel-oxygen mixture is partially combusted resulting in a hydrogen rich syngas. Hydrogen and carbon monoxide are obtained via the water-gas shift reaction. Carbon dioxide can be co-fed to lower the hydrogen to carbon monoxide ratio.
The partial oxidation reaction occurs when a substoichiometric fuel-air mixture or fuel-oxygen is partially combusted in a reformer or partial oxidation reactor. A distinction is made between thermal partial oxidation and catalytic partial oxidation. The chemical reaction takes the general form:
Idealized examples for heating oil and coal, assuming compositions C12H24 and C24H12 respectively, are as follows:

Plasma reforming

The Kværner-process or Kvaerner carbon black & hydrogen process is a plasma reforming method, developed in the 1980s by a Norwegian company of the same name, for the production of hydrogen and carbon black from liquid hydrocarbons. Of the available energy of the feed, approximately 48% is contained in the hydrogen, 40% is contained in activated carbon and 10% in superheated steam. CO2 is not produced in the process.
A variation of this process is presented in 2009 using plasma arc waste disposal technology for the production of hydrogen, heat and carbon from methane and natural gas in a plasma converter

Coal

For the production of hydrogen from coal, coal gasification is used. The process of coal gasification uses steam and a carefully controlled concentration of gases to break molecular bonds in coal and form a gaseous mix of hydrogen and carbon monoxide.
This source of hydrogen is advantageous since its main product is coal-derived gas which can be used for fuel. The gas obtained from coal gasification can later be used to produce electricity more efficiently and allow a better capture of greenhouse gases than the traditional burning of coal.
Another method for conversion is low temperature and high temperature coal carbonization.

Petroleum coke

Similarly to coal, petroleum coke can also be converted in hydrogen rich syngas, via coal gasification. The syngas in this case consists mainly of hydrogen, carbon monoxide and H2S, depending on the sulfur content of the coke feed. Gasification is an attractive option for producing hydrogen from almost any carbon source, while providing attractive hydrogen utilization alternatives through process integration.

From water

Methods to produce hydrogen without the use of fossil fuels involve the process of water splitting, or splitting the water molecule H2O into its components oxygen and hydrogen. When the source of energy for water splitting is renewable or low-carbon, the hydrogen produced is sometimes referred to as green hydrogen. The conversion can be accomplished in several ways, but all methods are generally more expensive than fossil-fuel based production methods.

Electrolysis

Around 8 GW of electrolysis capacity is installed worldwide, accounting for around 4% of global hydrogen production.
Electrolysis consists of using electricity to split water into hydrogen and oxygen. Electrolysis of water is 70–80% efficient while steam reforming of natural gas has a thermal efficiency between 70–85%. The efficiency of electrolysis is expected to reach 82–86% before 2030, while also maintaining durability as progress in this area continues at a pace. Water electrolysis can operate between 50–80 °C, while steam methane reforming requires temperatures between 700–1100 °C. The difference between the two methods is the primary energy used; either electricity or natural gas. Due to their use of water, a readily available resource, electrolysis and similar water-splitting methods have attracted the interest of the scientific community. With the objective of reducing the cost of hydrogen production, renewable sources of energy have been targeted to allow electrolysis.
There are three main types of cells, solid oxide electrolyser cells, polymer electrolyte membrane cells and alkaline electrolysis cells. SOECs operate at high temperatures, typically around 800 °C. At these high temperatures a significant amount of the energy required can be provided as thermal energy, and as such is termed High temperature electrolysis. The heat energy can be provided from a number of different sources, including waste industrial heat, nuclear power stations or concentrated solar thermal plants. This has the potential to reduce the overall cost of the hydrogen produced by reducing the amount of electrical energy required for electrolysis. PEM electrolysis cells typically operate below 100 °C and are becoming increasingly available commercially. These cells have the advantage of being comparatively simple and can be designed to accept widely varying voltage inputs which makes them ideal for use with renewable sources of energy such as solar PV. AECs optimally operate at high concentrations electrolyte and at high temperatures, often near 200 °C.

Industrial output and efficiency

Efficiency of modern hydrogen generators is measured by energy consumed per standard volume of hydrogen, assuming standard temperature and pressure of the H2. The lower the energy used by a generator, the higher would be its efficiency; a 100%-efficient electrolyser would consume of hydrogen,. Practical electrolysis may consume, and a further if the hydrogen is compressed for use in hydrogen cars.
Electrolyser vendors provide efficiencies based on enthalpy. To assess the claimed efficiency of an electrolyser it is important to establish how it was defined by the vendor.
There are two main technologies available on the market, alkaline and proton exchange membrane electrolysers.
Traditionally, alkaline electrolysers are cheaper in terms of investment, but less efficient; PEM electrolysers, conversely, are more expensive but are more efficient and can operate at higher current densities, and can therefore be possibly cheaper if the hydrogen production is large enough.
Conventional alkaline electrolysis has an efficiency of about 70%, however thyssenkrupp have recently developed an advanced alkaline water electrolyser with an efficiency of 82%. Accounting for the use of the higher heat value, average working efficiencies for PEM electrolysis are around 80%, or 82% using the most modern alkaline electrolysers. PEM efficiency is expected to increase to approximately 86% before 2030. Theoretical efficiency for PEM electrolysers are predicted up to 94%.
Considering the industrial production of hydrogen, and using current best processes for water electrolysis which have an effective electrical efficiency of 70–82%, producing 1 kg of hydrogen requires 50–55 kWh of electricity. At an electricity cost of $0.06/kWh, as set out in the Department of Energy hydrogen production
targets for 2015, the hydrogen cost is $3/kg. With the range of natural gas prices from 2016 as shown in the graph putting the cost of SMR hydrogen at between $1.20 and $1.50, the cost price of hydrogen via electrolysis is still over double 2015 DOE hydrogen target prices. The US DOE target price for hydrogen in 2020 is $2.30/kg, requiring an electricity cost of $0.037/kWh, which is achievable given recent PPA tenders for wind and solar in many regions. This puts the $4/gge H2 dispensed objective well within reach, and close to a slightly elevated natural gas production cost for SMR.
In many cases, the advantage of electrolysis over SMR hydrogen is that the hydrogen can be produced on-site, meaning that the costly process of delivery via truck or pipeline is avoided.
In other parts of the world, steam methane reforming is between $1–3/kg on average. This makes production of hydrogen via electrolysis cost competitive in many regions already, as outlined by Nel Hydrogen and others, including an article by the IEA examining the conditions which could lead to a competitive advantage for electrolysis.

Chemically assisted electrolysis

In addition to reduce the voltage required for electrolysis via the increasing of the temperature of the electrolysis cell it is also possible to electrochemically consume the oxygen produced in an electrolyser by introducing a fuel into the oxygen side of the reactor. This reduces the required electrical energy and has the potential to reduce the cost of hydrogen to less than 40~60% with the remaining energy provided in this manner. In addition, carbon/hydrocarbon assisted water electrolysis has the potential to offer a less energy intensive, cleaner method of using chemical energy in various sources of carbon, such as low-rank and high sulfur coals, biomass, alcohols and methane, where pure CO2 produced can be easily sequestered without the need for separation.

Radiolysis

Nuclear radiation can break water bonds through radiolysis. In the Mponeng gold mine, South Africa, researchers found in a naturally high radiation zone a community dominated by a new phylotype of Desulfotomaculum, feeding on primarily radiolytically produced hydrogen. Spent nuclear fuel is also being looked at as a potential source of hydrogen.

Thermolysis

Water spontaneously dissociates at around 2500 °C, but this thermolysis occurs at temperatures too high for usual process piping and equipment. Catalysts are required to reduce the dissociation temperature.

Thermochemical cycle

s combine solely heat sources with chemical reactions to split water into its hydrogen and oxygen components. The term cycle is used because aside from water, hydrogen and oxygen, the chemical compounds used in these processes are continuously recycled. If electricity is partially used as an input, the resulting thermochemical cycle is defined as a one.
The sulfur-iodine cycle is a thermochemical cycle processes which generates hydrogen from water with an efficiency of approximately 50%. The sulfur and iodine used in the process are recovered and reused, and not consumed by the process. The cycle can be performed with any source of very high temperatures, approximately 950 °C, such as by Concentrating solar power systems and is regarded as being well suited to the production of hydrogen by high-temperature nuclear reactors, and as such, is being studied in the High-temperature engineering test reactor in Japan. There are other hybrid cycles that use both high temperatures and some electricity, such as the Copper–chlorine cycle, it is classified as a hybrid thermochemical cycle because it uses an electrochemical reaction in one of the reaction steps, it operates at 530 °C and has an efficiency of 43 percent.

Ferrosilicon method

Ferrosilicon is used by the military to quickly produce hydrogen for balloons. The chemical reaction uses sodium hydroxide, ferrosilicon, and water. The generator is small enough to fit a truck and requires only a small amount of electric power, the materials are stable and not combustible, and they do not generate hydrogen until mixed. The method has been in use since World War I. A heavy steel pressure vessel is filled with sodium hydroxide and ferrosilicon, closed, and a controlled amount of water is added; the dissolving of the hydroxide heats the mixture to about 93 °C and starts the reaction; sodium silicate, hydrogen and steam are produced.

Photobiological water splitting

Biological hydrogen can be produced in an algae bioreactor. In the late 1990s it was discovered that if the algae are deprived of sulfur it will switch from the production of oxygen, i.e. normal photosynthesis, to the production of hydrogen. It seems that the production is now economically feasible by surpassing the 7–10 percent energy efficiency barrier. with a hydrogen production rate of 10–12 ml per liter culture per hour.

Photocatalytic water splitting

The conversion of solar energy to hydrogen by means of water splitting process is one of the most interesting ways to achieve clean and renewable energy systems. However, if this process is assisted by photocatalysts suspended directly in water instead of using photovoltaic and an electrolytic system the reaction is in just one step, it can be made more efficient.

Biohydrogen routes

and waste streams can in principle be converted into biohydrogen with biomass gasification, steam reforming, or biological conversion like biocatalysed electrolysis or fermentative hydrogen production.
Among hydrogen production methods such as steam methane reforming, thermal cracking, coal and biomass gasification and pyrolysis, electrolysis, and photolysis, biological ones are more eco-friendly and less energy intensive. In addition, a wide variety of waste and low-value materials such as agricultural biomass as renewable sources can be utilized to produce hydrogen via biochemical pathways. Nevertheless, at present hydrogen is produced mainly from fossil fuels, in particular, natural gas which are non-renewable sources. Hydrogen is not only the cleanest fuel but also widely used in a number of industries, especially fertilizer, petrochemical and food ones. This makes it logical to investigate alternative sources for hydrogen production. The main biochemical technologies to produce hydrogen are dark and photo fermentation processes. In dark fermentation, carbohydrates are converted to hydrogen by fermentative microorganisms including strict anaerobe and facultative anaerobe bacteria. A theoretical maximum of 4 mol H2/mol glucose can be produced and, besides hydrogen, sugars are converted to volatile fatty acids and alcohols as by-products during this process. Photo fermentative bacteria are able to generate hydrogen from VFAs. Hence, metabolites formed in dark fermentation can be used as feedstock in photo fermentation to enhance the overall yield of hydrogen.

Fermentative hydrogen production

is the fermentative conversion of organic substrate to biohydrogen manifested by a diverse group of bacteria using multi enzyme systems involving three steps similar to anaerobic conversion. Dark fermentation reactions do not require light energy, so they are capable of constantly producing hydrogen from organic compounds throughout the day and night. Photofermentation differs from dark fermentation because it only proceeds in the presence of light. For example, photo-fermentation with Rhodobacter sphaeroides SH2C can be employed to convert small molecular fatty acids into hydrogen.
Fermentative hydrogen production can be done using direct biophotolysis by green algae, indirect biophotolysis by cyanobacteria, photo-fermentation by anaerobic photosynthetic bacteria and dark fermentation by anaerobic fermentative bacteria. For example, studies on hydrogen production using H. salinarium, an anaerobic photosynthetic bacteria, coupled to a hydrogenase donor like E. coli, are reported in literature.
Enterobacter aerogenes is an outstanding hydrogen producer. It is an anaerobic facultative and mesophilic bacterium that is able to consume different sugars and in contrast to cultivation of strict anaerobes, no special operation is required to remove all oxygen from the fermenter. E. aerogenes has a short doubling time and high hydrogen productivity and evolution rate. Furthermore, hydrogen production by this bacterium is not inhibited at high hydrogen partial pressures; however, its yield is lower compared to strict anaerobes like Clostridia. A theoretical maximum of 4 mol H2/mol glucose can be produced by strict anaerobic bacteria. Facultative anaerobic bacteria such as E. aerogenes have a theoretical maximum yield of 2 mol H2/mol glucose.
Biohydrogen can be produced in bioreactors that utilize feedstocks, the most common feedstock being waste streams. The process involves bacteria feeding on hydrocarbons and exhaling hydrogen and CO2. The CO2 can be sequestered successfully by several methods, leaving hydrogen gas. In 2006–2007, NanoLogix first demonstrated a prototype hydrogen bioreactor using waste as a feedstock at Welch's grape juice factory in Pennsylvania.

Enzymatic hydrogen generation

Diverse enzymatic pathways have been designed to generate hydrogen from sugars.

Biocatalysed electrolysis

Besides dark fermentation, electrohydrogenesis is another possibility. Using microbial fuel cells, wastewater or plants can be used to generate power. Biocatalysed electrolysis should not be confused with biological hydrogen production, as the latter only uses algae and with the latter, the algae itself generates the hydrogen instantly, where with biocatalysed electrolysis, this happens after running through the microbial fuel cell and a variety of aquatic plants can be used. These include reed sweetgrass, cordgrass, rice, tomatoes, lupines and algae.

Nanogalvanic aluminum alloy powder

An aluminum alloy powder invented by the U.S. Army Research Laboratory in 2017 was shown to be capable of producing hydrogen gas upon contact with water or any liquid containing water due to its unique nanoscale galvanic microstructure. It reportedly generates hydrogen at 100 percent of the theoretical yield without the need for any catalysts, chemicals, or externally supplied power.

Environmental impact

As of 2020 most of hydrogen is produced from fossil fuels, resulting in carbon emissions.
Hydrogen can also be produced from renewable energy sources. In this case, it is often referred to as green hydrogen. There are two practical ways of producing hydrogen from renewable energy sources. One is to use power to gas, in which electric power is used to produce hydrogen from electrolysis, and the other is to use landfill gas to produce hydrogen in a steam reformer. Hydrogen fuel, when produced by renewable sources of energy like wind or solar power, is a renewable fuel.

Use of hydrogen

Hydrogen is used for the conversion of heavy petroleum fractions into lighter ones via hydrocracking. It is also used in other processes including the aromatization process, hydrodesulfurization and the production of ammonia via the Haber process.
Hydrogen may be used in fuel cells for local electricity generation or potentially as a transportation fuel.
Hydrogen is produced as a by-product of industrial chlorine production by electrolysis. Although requiring expensive technologies, hydrogen can be cooled, compressed and purified for use in other processes on site or sold to a customer via pipeline, cylinders or trucks. The discovery and development of less expensive methods of production of bulk hydrogen is relevant to the establishment of a hydrogen economy.